North Western Railway Tender Results

BEARING LOCK DRUM

Tie Bars for Cranking Arm,

Universal Come Along Clamp

OXAPLEX H2 GREASE

Limit Switch Case for Lavatory Door

Stainless steel wash basin complete

PTFE THREAD SEALING TAPE

S. S. Nyloc Nut M10 (A2 -70) as per IS: 1367 PT- 14 to IS:7002-2005

PU Paint (TWO PAck) shde RAL 9010 (Pure White) Full Gloss as per Drawing/Specification RDSO No. M&C/PCN/100/2018

DRAW HOOK WITH COLLAR TO DRG.NO.EMU-2-1-011/ALT. g

BERTH READING LIGHT (BRL) FITTING with Integrated USB Mobile Charging Socket, as per Drawing/ specification : LW 76410 Rated Input Voltage: 110 V AC/DC (90 V to 140 V AC/DC ), Rated output voltage: 5V/9V DC.

Rotator cuff repair set

Arthrocopic Shoulder surgery set

Cervical traction kit (sleeping )

Implant for ACL reconstruction set

Implant for ACL reconstruction set

Set of Pins with split pin and washer for Sona BLW design BMBS. one set consisting of items given as per Annexure-A. As per RDSO Spec. WD-23-BMBS Rev-1 Amndt-1 of Sept. 2016

Series type OVP (Over Voltage Protection) suitable for use in 4.5 kW RRUs as per RDSO's FRS No. RDSO/PE/SPEC/AC/005-2013. Make -Any OEM of RRU of 4.5 kW.

POH kit for centrifugal dirt collector to WD-92051-S-03 Alt-5

2 Watt LED retrofit type lamp, suitable for use in existing 25 Watt incandescent screw-type cap lamp holders, conforming to ICF Specification No. ICF/ELEC/960 Rev- 00 with Correction Slip No. 3. The LED lamp is to be operated on 110V AC/DC (operating voltage range 90 to 140V DC/AC). The LED lamp shall have an inbuilt driver.

Brake cylinder 300 mm

SET OF GUIDE BLOCK

DOOR BOTTOM GUIDE

Hydraulic Scissor Lifting Table Capacity 2 TON

Supply of WP / NWP feeder 1 & 2 Enable, Supply of RA ENABLE ROTARY SELECTOR SWIT, Supply of Rotary Switch.

NEEMAN Silver Grey Colored Steel Shelving Cabinets

NEEMAN Floor Standing Case or Storage Unit (unit with door) with 2 doors

NEEMAN Low-back Chair With Fixed armrest without cushion and padding

NEEMAN Mid-back Chair With Fixed armrest with Padding

RELEASE VALVE 1/2 inch type H TO ESCORT's DRG.NO. 4A-16014/1 OR WSF PART NO. PC 491 FOR DEMU/DPC

Sealed glass unit for LHB fixed window to RCF drg. no. LW-54104 Alt-i. Confirming to MDTS-089 Rev-4.

Supply of Saloon Sliding Door along with Move Mechanism for Reverse Mounting arrangement of Cabin-8 Saloon Sliding Door for LWFAC coaches as per drg. no. MI007752 and MI007743.

RUBBER PROFILE FOR LHB COACHES (LENGTH-3.6 MTR)

Paint Enamel Synthetic Exterior Brushing Finishing White to IS:8662/2024.

Anti belt slippage clamp arrangement for 4.5 KW alternator as per RDSO Drawing No RDSO/PE/SK/TL/0196-2017 (Rev-0) or latest.

Mounting Plate for electric push button as per drawing No. SKT/2026/31/C

(1) Gas Tight Glass syring 1000 %u03BCL-05 nos. as per attach technical specification. Make-Hamilton or equivalent. (2) Gas Tight Glass syring 0.5 %u03BCL- 05 nos. as per attach technical specification. Make-Hamilton or equivalent.

THREE PHASE STAINLESS STEEL HEATER UNIT COMPLETE FOR LHB RMPU AC COACHES 6 KW, 415 VOLT AC, CONFORMING TO RDSO SPEC. RDSO/PE /SPEC/AC/0061-2005(REV-I) OR LATEST. ACCEPTED MAKE -TEETHA & DASPASS.

NON INSULATED PIN TYPE HEAVY DUTY COPPER TERMINAL LUG OR CRIMPING SOCKET OF SIZE 1.5 SQMM. EDTS- 200 REV- NIL AM-2 OR LATEST, MATERIAL: COPPER, FINISH: TIN COATED, OPERATING TEMPERATURE: 55 TO 150 DEGREES CELSIUS. AS PER VENDOR DIRECTORY SUB ITEM ID - 2400038001.

Karl fischer coulometric reagent contains methanol suitable for both anode and cathode with electrolysis nutralization moisture less than 1.5 mg, suitable for globolytics karl fischer coloumetric titrator( 500 ml packing) as per technical specification.

SET OF SPARES FOR POH OF RMPU EACH SET CONSIST OF:- 1. COPPER ELBOW SIZE - 1/2 INCH THICKNESS 01 MM- 01 NO. 2. COPPER SOCKET SIZE -1/2 INCH THICKNESS 01 MM- 01 NO. 3. COPPER ELBOW SIZE - 7/8 INCH THICKNESS 01 MM- 01 NO. 4. COPPER SOCKET SIZE- 7/8 INCH THICKNESS 01 MM- 01 NO.

DC TO DC CONVERTER, INPUT VOLTAGE : 24 V DC, OUTPUT VOLTAGE : 110 V DC, WATTAGE : 660 WATT, WITH VOLTAGE DISPLAY UNIT( INPUT/OUTPUT VOLTAGE BOTH) AND INBUILT PROTECTION ARRANGEMENT FROM SHORT CIRCUIT,OVER LOAD,REVERSE POLARITY ETC.

Additional Lashing Hook Assembly to RDSO Drg No RDSO/CG/DRG/21009 Item No 24. Item to be supplied with Red Oxide Zinc Chromate Primer coating. Note: Material grade for IS:2062 is IS:2062 E250 Quanlity A.

USB MOBILE CHARGING SOCKET 2.1A SINGLE PORT FOR LHB COACHES, OPERATING VOLTAGE RANGE 110V-250V AC/DC AS PER TECHNICAL SPECIFICATION OF RCF SPECIFICATION NO.- EDTS-411, (COMPATIBLE WITH MODULAR PLATE) CONFORMING TO IS: 13252 (PART-1) MAKE- SSK, HAVELLS, LEGRAND OR SIMILAR.

parking brake release rope (KBI Part no- II89242/1) of Parking brake cylinder.

Crimping tool Kit for crimping of Mil grade type connectors of LHB coaches.

SET OF MEMBER (ONE SET CONSISTS OF LH- 01 NO AND RH- 01 NO) AS PER DRG NO. LE11316 Alt 'a' (FOR LH) AND LE11315 Alt 'a' (FOR RH). Item to be supplied with Red Oxide Zinc Chromate Primer Coating.

R3 Entry Door Latch for Vande Bharat as per Southco connect create innovate drg no: J-R3-99-61.

Supporting Bracket and Accessories, Material and Qty as per Drg No- MI006005 Alt- c, Item No- 3, 4, 5, 6, 7, 8 to Annexure A

WIRE MESH MADE UP OF MILD STEEL WELDED WIRE SIZE- 32x32 MM, WIRE DIA 3.00 MM, WIDTH 1200 MM.