North Western Railway Tender Results

TWIN TOWER AIR DRYER WITH PRECOOLESCER AND FINAL FILTER FOR WAG-9 HC LOCOMOTIVES.

STA NEOPLASTINE CI PLUS 5 (CODE 606) (pack size- 1x6x5ml)

Protective cover for drain cock assly. to RDSO drg. no. SK-96081 Alt-5.Item no. 14. Matl.& Spec. As per drg.

PORTABLE SINGLE PHASE WELDING MACHINE

Parallel Clamp

Fire Extinguisher

Fluticasone 50mcg. with Azelastine 140mcg. Nasal Spray min. 70MD Phial

Paint enamel synthetic exterior brushing finish colour under coat apricoat yellow RAL shade card colour 0708040 to IS:8662-2024

System pack Reagent kit for Creatinine, End Point Kit for Fully Automatic Biochemistry Analyzer BA400(PACK SIZE 600 ml)

Curtain ring with hook to carriage workshop ajmer drg no.SKT/2012/28/C Alt. nil.

Corded Small Angle Grinders

Rotary Hammer Drill Machine

HYDRAULIC TRACK JACK

Corded Brushed Electric Drill

Door Stopper for LHB coaches as per drg. no. MI004112 Alt.

RFID Tags of the Indian Railway (V1,1)

Cordless portable Grinder

Set of Pipe wrench

Screw driver set

BFB steady arm hook

Cup type goggle (for welders)

Digital Shore Durometers For Testing Shore A Hardness

Supply of Black Paint.

Glimepiride 2mg + Metformin 500mg + Voglibose 0.2mg Tab/Cap

RUBBER CAP FOR PRIMARY VERTICAL DAMPER

AXIAL FAN OF 130 MM SWEEP, SUITABLE FOR WORKING ON 230 V AC, 50 HZ SUPPLY, TYPE: AXIAL, POWER- 45 WATT, 2800 RPM, CONFORMING TO IS: 3588-1987 (Reaffirmed 1999)

SET OF DUAL POLYOLEFIN HEAT SHRINKABLE SLEEVES.

TRANSDUCER PRESSURE MAIN RESERVOIR (MRPT).

Terminal Box Cover Assly

KEY BRAKE SHOE

Seal PE for Suspension

Laser Wheel Profile Gauge

Modified coach water inlet ( connector ) with strainer MDTS 203 Rev-6, packing instruction PI-042.

Steel tubes-Galvanized 'ISI' IS:1239(pt-1)/2004 in random length of 4 to 7 meters, screwed at both ends as per IS:554/1999 Rev-4 Amndt. 1, screwed at both ends and socketed at one end and other end protected with plastic thread protectors light coated class medium, nominal bore size 50 mm.

Body side hand hold

HRC FUSE LINK 6 AMP, BREAKING CAPACITY 80 KA, OFFSET BOLTED TYPE, CLOSED SLOT TYPE, MODEL NO. 3NW TIA6 OF SIEMENS OR EQUIVALENT OF BUSSMAN/C&S/L&T MAKE AND CONFORMING TO IS: 13703 PART 2 / IEC 60269-2 (LATEST) AND ICF DRAWING NO. GS6-7-2-602 (ALTERATION-L). SUITABLE FOR USE IN ROTARY SWITCH BOX OF NON-AC COACHES. APPROVED MAKES: SIEMENS, BUSSMAN / C&S / L&T.

Set of Dustbin Doors Inside Lavatory below Washbasin for LHB Coaches. (1) Dustbin Door (RH) INT ORIENT confirming to RCF drg. no. ED63042, Alt. nil, Qty. = 1 nos. (2) Dustbin Door (LH) INT ORIENT confirming to Mirror Image to RCF drg. no. ED63042, Alt. nil, Qty. = 1 nos.

MS HEX HEAD BOLT SIZE M8X50 MM FULLY THREAD WITH TWO FLAT WASHER AND TWO NUT YELLOW ZINK COATED, GRADE 5.6, AS PER IS : 1363/67.

NUTS AND BOLTS

MMI CAB CONTROL PANEL

Axle pulley complete with rubber pad, suitable for use in 18/25 KW, 110Volt Alternator, as per RDSO Drawing no. SKEL-3652 Alt -3 for 16.25 ton axle and as per RDSO specification no. ELPS/SPEC/TL/13 March 1998. Manufacturer name, manufacturing month and year should be marked on Axle pulley

RELEASE SPRING FOR MK-50 DRAFT GEAR.

1. FITTING STRAIGHT CONNECTOR 8MM TUBE 1/4 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM . SPEC : MMDTS19027_Rev3. 2. FITTING MALE ELBOW 8MM BSP 1/8 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM SPEC: MMDTS 19027_Rev3. 3. FITTING EQUAL TEE 8MM TUBE, DESIGNED FOR PRESSURISED FLUSHING SYSTEM SPEC : MMDTS 19027_Rev3. 4. FITTING ELBOW 8 MM TUBE, BSP 1/4 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM .SPEC : MMDTS 19027_Rev3. 5. MUFFLER 1/8 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM SPEC : MMDTS 19027_Rev3. 6. MUFFLER 1/4 INCH DESIGNED FOR PRESSURISED FLUSHING SYSTEM SPEC : MMDTS 19027_Rev3.

IR-DRDO Bio-Digester System for LHB Coaches To RCF DRG No-MI005531 Alt-j, (RH) .

HOG A/ HOG B Enable Rotary Selector Switch 16 Amp , 2 Way with OFF Position accepted make as per BOM page no. 26 Sr no. 25 of RDSO Specification No : RDSO/PE/SPEC/TL/0195-2019 (Rev.-0) or Latest Suita

Hydraulic Motor for Vent Fan for 700/1400HP DEMU/DPC to CIL Part No. 3230038 or Rexroth Part No. A2FM12/61W-VPB-040-S or CML Part No. A2FM12/61W-VPB 040-S

Set of Locking arrangement of KBI make Brake caliper 1. Locking spring Part No. C56859 QTY=1 No. , 2. Locking gate Part No. C77932 QTY=1 No. , 3. Clamping pin Part No. 462523 QTY=1 No.

Pin electroplated size dia. 40x120mm

Sealing ring for water tank ( size-dia 15 x 805mm ).

Male elbow connector 1" OD X 3/4" BSPT(M) as per Drawing No ICF/STD 3-5-023 ITEM-3, Alt - j & as per ICF Spec: ICF/MD/SPEC-166, Issue Status-01, Rev. 04 of 28.08.2019.