Organization Name Tender Results

Notebook Computers-laptop Notebook Computers-laptop ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7 th 7 th Processor 1.6 GHz Dual-Core Intel Core i5 (Turbo boost upto 2.7GHz) with 3MB shared L3 cache As per GeM Catalogue. Graphics Graphics Type Integrated - Graphics Card Description Intel HD Graphics 6000 - Graphics Memory (GB) NA - Memory Type of RAM DDR 3 - RAM Size (GB) 8 8 (or higher) RAM Expandable upto ( in GB) using spare DIMM Slot on Mother Board NA 8, 16, 32, 64, NA RAM Speed (MHz) 1600 - Storage Type of Hard Disk Drive SSD SATA, SSD, Fusion, PCIe-based onboard SSD Hard Disk Drive Size( 256 256.0 1/3 GB) Higher is better Hard Disk Drive Speed (rpm) null - Operating System Operating System Mac OS Sierra or Latest Mac OS Sierra or Latest Ports USB 3.0 or higher (No.) 2 - USB Type C Not-Available - VGA Port Not-Available - HDMI Port Not-Available - DISPLAY PORT Not-Available - Thunderbolt Port 2 - Connectivity Network Connectivity Ethernet Gigabit 10/100/1000 - Wi-fi Connectivity 802.11 ac - Bluetooth 4.0 or higher - Display LCD LED Backlit Display Type Non Touch Touch, Non Touch Display Size (Inch) 13.3 13.3 (or higher) Display Resolution (Pixel) 1440 x 900 1366 x 768, 1440 x 900, 1920 x 1080, 2304 x 1440, 2560 x 1600, 2736 x 1824, 2880 x 1800, 3200 x 1800, 3840 x 2160 Certification BIS Registration under CRS of Meity Yes - BIS Registration no. - - BEE/Energy Star Certification - - ROHS Compliance Yes - Additional feature Finger Print Reader No - Webcam (HD or Better) Available - Miscellaneous Optical Drive not available - Keyboard Standard - Trusted Platform Module Enabled Yes - Weight (With Battery) (Kg) 1.35 - Carry Case Not Included Included, Not Included Power Battery Type (Li-Ion/Li- Polymer) Built-in - Battery Back-up (Hours) 10 - 2/3 Warranty Battery Warranty (Year) 1 1, 3 (or higher) On Site OEM Warranty (Year) 1 1, 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ambika Prasad Tripathi 226001, secretariat 1 15

Tablet Based Biometric Attendance System

Steel Bookcases

All in one All In One ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i7-7700T (2.9 GHz, 8 MB Cache, 4 Cores) As per GeM Catalogue. Chipset Chipset Intel H110 - Graphics Graphics type Integrated - Graphic Card Description AS PER COMPNY - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 (or higher) Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 8 4, 8, 16, 32 RAM Expandability Upto (GB) 32 8, 32, Not- Available Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Windows 10 Home, 1/3 Professional Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 23 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 2 - USB Port 3.0 (No.) 4 - VGA Port Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 240 - Power Efficiency (%) Minimum 80 - Others Webcam Full HD - DVD R/W Available - 2/3 Optical drive Integrated - Stand Standard - On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sachhidanand Prasad 462023, Gautam Nagar, Near Chetak Bridge, Bhopal 1 15

Printer or photo Copier Paper Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 3 Year (s) Printer Or Photo Copier Paper ( 220 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 14490 : Latest Yes - Test Method as per IS: 1060 Yes - Size Size and Dimension of The Paper (W X L) in mm 210 x 297 210 x 297, 297 X 420 Size of the Paper A4 A4, A3 GSM of Paper 75 75, 80, 90, 95 Quantity Number of Sheets per Ream 500 500 (or higher) Physical Characteristics Brightness in % 95 Tensile Index MD in Nm/g 48 - Tensile Index CD in Nm/g 40 - Opacity in % 94 - Tear Index (Avg) in Nm.m²/g 5 - 1/3 Smoothness for both sides (Bendtsen) in ml/min 260 - Thickness in µm 105 - Moisture in % 4 - Stiffness MD 2.5 - Stiffness CD 1.5 - Surface Strength Dennison (Wax Pick) >= 12 A 12A - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Harish Kumar 302006, Civil Lines, Raj Bhawan, Jaipur 220 15

revolving chair Revolving Chair ( 3 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type 360 Degree swivel, posture control with multilocking position synchronized mechanism 360 Degree swivel, posture control with multilocking position synchronized mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 120 mm Arm With With Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A - Ergonomic Seat Design true true Yes is better Back type push back push back 1/5 Backrest is made of two pcs injection moulded frame Backrest is made of two pcs injection moulded frame - backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 4-Position Locking - Number of arm movement 4(up & down end left & right) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support external & adjustable integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden 2/5 Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material aluminium covered with pu steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) Genuine leather of 0.8-1.0 mm thickness - 3/5 DIMENSION Overall Chair Height ±15mm 1050 As per GeM Catalogue. Backrest Height ±15mm 600 As per GeM Catalogue. Backrest Width ±10mm 550 As per GeM Catalogue. Seat Height ±15 mm 520 520 Seat Width ±10 mm 520 500, 520, 550 Seat Depth ±10 mm 520 400, 460, 480, 500, 550, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 600 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 45 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dr Pyarelal Meel 302015, Pashudhan Bhawan Parisar, Lal Kothi, Tonk Road, Jaipur 3 15

Human Resource Outsourcing Service

Drinking Water Cooler Drinking Water Cooler ( 8 ) Technical Specifications Specification Specification Name Values Allowed Values CAPACITY/ENERGY TYPE Storage - Cooling Capacity Litres/Hour 150 Liters/hour 40 Liters/hour, 60Liters/hour, 150 Liters/hour Storage Capacity 150 40, 80, 120, 150 Maximum Energy Consumption (Watt) 1550 Watt for 150 ltr/hr cooling cap. - Power Factor 1 - CERTIFICATION Conformity to Indian standard IS: 1475 latest - ISI MARKED Yes - Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true - Specification Specification Name Values Allowed Values GENERIC Eco-Friendly (Non CFC Refrigerant) Yes - 1/3 Water Tank sheet material and thickness Stainless Steel (Grade AISI 304), thickness > =0.8 mm - Water Tank cover and lid bottom Sheet material Al. sheet - Water Tank cover and lid bottom Sheet Thickness 1.5 - Cooler Cabinet sheet material Stainless Steel (Grade AISI 304) - Cooler Cabinet sheet thickness 0.8 - Warranty on Machine 1 1, 2, 3 Higher is better Warranty on Compressor 1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Datt Sharma 136118, Parakeet Tourist Resort Pipli 8 15

computer servers Computer Servers ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Form Factor Rack Rack, Tower Size (RU) 2 - Processor Make Intel Intel, AMD, SPARC Max. Number of sockets available on chipset 2 Max. Number of sockets populated with processor 1 Number of core per Processor 8 As per GeM Catalogue. Processor Configuration E5-2620 v4, 8 core, 2.10 GHz with 20 MB smart cache memory, 85 watt E5-2620 v4, 85 watt Chipset compatible with CPU C610 - Availability of Co- Processor No - If Yes Co-Processor Configuration NA As per GeM Catalogue. PCI Slots (Express Gen 3.0) 7 - 1/4 Type of RAM DDR4 - RAM Size (GB) 32 32 RAM upgradable upto (GB) 1024 DIMM Slots (No.) 24 - Type of Hard Disk Drive SAS, NL SAS, SSD, SATA SAS, SATA Hard disk drive Capacity (GB) 4000 Hard disk drive Speed (RPM) 7200 - RAID Controller Cache (MB) 1024 - RAID Type 1 - RAID Controller Ports @12 Gbps 2 - Video Controller (support VGA or above resolution) Yes - Keyboard Yes - Mouse Yes - Bays (min. 2 internal or more hot plug) 8 - USB Ports (version 2.0/3.0) 4 - Certifications Compliance support by Windows, Red Hat or Novell or Oracle Cluster S/W Yes - DVD ROM (or better) 8x or better - Network Card Supported 1G - FC HBA Dual port card NA - FC HBA Dual port card Speed NA - Power Management - - Redundant Power Supply Yes - Redundant Fan Yes - Total No of Ports 4 - Declare SPEC int_rate_base 2006 ; specfp_rate_2006 for YES - 2/4 1, 2, 4, 8 prcessor as applicable Server scalability to be achieved within the box without adding nodes NA - RoHS Compliance Yes - BIS Registration number & its Validity - - Max. power consumption of the system (Watt) 750 - Availability of Type test reports consisting of verification of all the features & functional parameters & environmental tests sequences as under: a Dry heat test (For 16 hrs at a temperature of 45 degree C in accordance with IS: 90 00/part-3/section-5/197 7) b Cold test(For 4 hrs at a temperature of 0 degree C in accordance with IS: 9000/part-2/sec tion-4/1977 c Damp Heat Cyclic Test ( For 2 cycles of 24 hrs at a temperature of 40 degree C & 95% RH in accordance with IS: 90 00/part-5/section-1/198 1) Note:- The server shall be checked for all the parameters before conditioning, After completion of the above environmental tests sequence, with a recovery period of 1 to 2 hrs, the server shall be functional No - Name address of Lab - - Test Report No. date - - Power Supply 230 V +/-10%, 50 Hz - On Site OEM Warranty (years) 3 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity 3/4 S.No. Consignee Address Quantity Delivery Days 1 Devendrappa M Madari 585106, JNANA GANGA, GULBARGA UNIVERSITY, KALABURAGI - 585106 2 20

e cart for garbage Experience with Gov. Required 12 Year (s) E Cart For Garbage ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Generic Parameters Type of E Cart Fully Electric, Battery Operated Motor Driven for Carrying Bins Fully Electric, Battery Operated Motor Driven for Carrying Bins Model Number of E- Cart - - Colour of E Cart - - The E Cart Must Fabricated From Good Quality Steel properly Painted to avoid Rusting for more than 5 Years, YES YES Name and Grade of Steel from which E Cart Body Framed - - Kerb Weight of E- Cart (kg) 365 Garbage Carrying Capacity (kg) 500 Run Distance (for a Full Charge of Battery, to be tested with full load at maximum AIS-040 120 1/5 )) (km) Number of Bins 1 1 Capacity of Individual Bins in litres (Ltrs) 0 0.0 Type of Chassis for E cart - - Ground Clearance as per IS : 9435 (mm) 180 Wheel Base (mm) 935 Turning Radius (mm) 1700 Power Transmission from Motor Shaft to Wheels Direct Mounting Direct Mounting, Chain, Sprocket Type, Other Mechanical Mechanisms Please Specify the Mechanical Mechanism otherwise Put NA - - Type of Battery as per AIS-048 Lead Acid, EV Grade, Tubular Deep Discharge Lead Acid, Tubular Deep Discharge Capacity of the Battery approved by ICAT/ARAI (Ah) 100 Battery Voltage, Nominal (Volts) 48V 48V, 60 V Maximum Overall Dimensions of the Battery ( L x Wx H ) (mm3) - - Nominal Filled Weight of the Battery (kg) 29.7 Motor Controller ( Must Suitable for starting, accelerating, decelerating, driving, and stopping of E Cart - - Battery Charger 220/230 V Nominal Input Voltage, High Efficiency Type 220/230 V Nominal Input Voltage, High Efficiency Type Charging Current (A) 15 Type of Motor Brushless DC Motor Brushless DC Motor Motor Output Power, 48V/60V at Full Load (watt) 1210 Overall Efficiency of 85 2/5 the E Cart ( to be tested at Full Load with maximum speed as per Concerned AIS standards (%) Gradeability of E- cart, ( to be tested at full procedure as per AIS -003 Load (Degree) 75 Certification Vehicle Certification OTHERS ARAI, VRDE, ICAT, OTHER S If Vehicle Certification from Others Agency, Name of the Agency otherwise put NA ARAI - Vehicle Certification Number and Date AALB 0283 DATED 1ST SEPTEMBER 2016 - Constructional Seating Facility For Driver only For Driver only Length of E -cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 2.77 Width of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 0.98 Height of E -Cart as per Gazette Notification by Ministry of Road and Transport Oct, 2014 (meters) 1.72 Dimensions of the cabin Provided for Bins (mm x mm x mm) (mm3) 930 X 1295 X 1070 - Size of Front Tyre (mm) - - Size of Rear Tyre - - Brake Type (Front) - - Brake Type ( Rear ) - - Suspension System (Front) - - Suspension System ( - - 3/5 Rear ) Reverse Gear Facility Yes Yes The Mounting of Batteries Yes Yes Vehicle lighting System Filament Type Filament Type, LCD Based, LED Based Instrument Panel Containing Speedometer and Battery Charging Indicator Yes Yes Glass Windshield with wiper motor as approved by ICAT/ARAI true Battery Make as per AIS :048:2009 Exide Okaya, Exide, ceil, Amaro n, Others If others please specify the Name of Brand, Otherwise put NA (as per AIS048 2009) - - Equipped with Start and Stop Button, parking Lights, Back lights with Reverse Gear Facility Yes Yes Equipped with Fire Extinguisher true Equipped with First Aid Box true Yellow Color reflective tape on Front and Rear Side of the E Cart Yes Yes E Cart Integration, Yes Yes Performance Parameters Speed of the E- Rickshaw as per CMVR -2014 with latest amndmt (to be tested with Full Load ) (kmph) 25 Battery Warranty 1 1, 2, 3 No. Of Free Service 1 1, 3, 4, 5 Complaince of Centre of Gravity of E Cart as a Compulsory Norms for Safety Yes Yes 4/5 Confirming to Applicable Environmental Test Yes Yes Noise level must be Low during Operation Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Narayan Kumar Aditya 495668, ward no. 10 sharda chowk akaltara chowk janjgir 2 15

Desktops Desktops ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 6th 6th, 7th, 8th Processor Intel Core i3-6100 (3.7 GHz, 3 MB Cache, 2 Cores) Intel Core i3-6100 (3.7 GHz, 2 Cores), Intel Core i3-6300 (3.8 GHz, 4 MB Cache, Intel Core i3-6320 (3.9 GHz, Intel Core i3-7100 (3.9 GHz, Intel Core i3-8100 (3.6 GHz, 6 MB Cache, 4 Cores) Motherboard Chipset Intel H110 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 2 - Expansion Slots (PCIe x 4) (Number) 2 - Expansion Slots (PCIe x 16) (Number) 2 - Graphics Graphics Type Integrated - Graphic Memory 1GB - 1/3 Operating System Operating System (Pre-Loaded) Windows 10 Profession al, Linux, DOS, Windows 10 Home, Windows 10 Professional under Microsoft Shape the Future Program Windows 10 Professional RAM Type of RAM DDR 4 - RAM Size (GB) 4 4 (or higher) RAM Expandability upto (GB) 32 16, 32, 64 (or higher) RAM Speed (MHz) 2133 - Storage Hard Disk (GB) 1000 1000 (or higher) Cabinet Cabinet Small Form Factor - Cabinet Volume (Litres) - - Internal Bays 1 - External Bays (Number) 0 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 3 - USB Port 3.0 (Number) 2 - Serial Port true - Parallel Port true - VGA true - HDMI true - Display Port true - Monitor Monitor Size (INCHES) 19.5 18.5, 19.5, 21.5, 24, 27 (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768, 1920x1080, 3200x1800, 3840 x 2160, 1440 x 900, 1600 x 900 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for true - 2/3 the given Model Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive DVD R/W - Internal Speaker true - On Site OEM Warranty (Year) 3 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dhanaji Vishnu Toraskar 421301, KALYAN DOMBIVLI MUNICIPAL CORPORATION SHANKARRAO CHOWK 20 30

Keyboard and Mouse Combo Keyboard And Mouse Combo ( 50 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Keyboard Type Standard keyboard Standard keyboard, Flexible Keyboard, Handheld, Mechanical Keyboard Mouse Type Laser Technology Laser Technology Keyboard Connectivity Wired Wired Mouse Connectivity Wired Wired Interface port for both Keyboard and Mouse USB 2.0 USB 2.0, USB 3.0, PS/2 If wireless, operating range of keyboard (meter) 0 - If wireless, operating range of mouse (meter) 0 - Number of keys on keyboard (Nos) 105 - Number of buttons in mouse (Nos) 2 - Mouse DPI (dpi) 15 - IP rating for keyboard 0 - Power source for NA - 1/3 wireless keyboard If Battery, type of battery NA - Power source for wireless Mouse NA - Life of Keyboard (Million key strokes) 2 - Dpi Switcher NA - Touch Pad (Keyboard) NA - Illuminated Keys (Keyboard) NA - Illuminated Mouse NA - Special keys (Keyboard) NA - Dimensions for keyboard (LxWxH) (mm x mm x mm) 480 X 179 X 24 - Dimensions for mouse (LxWxH) (mm x mm x mm) 15 X 5 X 5 - Weight of Mouse (grams) 200 - Weight of Keyboard (grams) 250 - BIS Registration under CRS of Deity for wireless keyboard NA - BIS Registration Number - - Availability of test certificate from Central Govt/NABL/ILAC acredited lab to prove conformity to specification No - If Yes, Test Report Number & date - - If Yes, Name of Lab - - If Yes, Address of Lab - - Warranty(Years) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Ravi Kumar Dadheech 306401, College Rd, Indira Colony Vistar, Pali, Rajasthan 306401 50 15

Fabric Pin Up Notice Boards

revolving chair Revolving Chair ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type knee tilt synchronic As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest brown - Ergonomic Seat Design true true, false Yes is better Back type push back push back, height adjustable Backrest is made of two pcs injection Backrest is made of one piece injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Steel Covered with Wooden Cladding steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram - DIMENSION Overall Chair Height 1220 As per GeM Catalogue. 3/5 ±15mm Backrest Height ±15mm 600 As per GeM Catalogue. Backrest Width ±10mm 440 As per GeM Catalogue. Seat Height ±15 mm 520 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 480 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.3 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 12 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 25 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 25 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand NO YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

Desktops

Multifunction Machines

Desktops Desktops ( 7 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel Intel Processor Generation 7th 7th Processor Intel Core i7-7700 (3.6 GHz, 8 MB Cache, 4 Cores) Intel Core i7-7700 (3.6 GHz, 4 Cores) Motherboard Chipset Intel H110 As per GeM Catalogue. Expansion Slots (PCIe x 1) (Number) 1 - Expansion Slots (PCIe x 4) (Number) 0 - Expansion Slots (PCIe x 16) (Number) 1 - Graphics Graphics Type Integrated - Graphic Memory N/A - Operating System Operating System (Pre-Loaded) Windows 10 Professional Windows 10 Professional RAM Type of RAM DDR 4 - RAM Size (GB) 8 8 (or higher) RAM Expandability 32 32 1/4 upto (GB) (or higher) RAM Speed (MHz) 2400 - Storage Hard Disk (GB) 1000 1000 (or higher) Cabinet Cabinet Tower - Cabinet Volume (Litres) - - Internal Bays 2 - External Bays (Number) 2 - DIMM Slots (Number) 2 - Connectivity Wireless NA - Network Connectivity 10/100/1000 on board Integrated Gigabit Port - Ports USB Port 2.0 (Number) 4 - USB Port 3.0 (Number) 4 - Serial Port false - Parallel Port true - VGA true - HDMI true - Display Port false - Monitor Monitor Size (INCHES) 18.5 18.5 (or higher) Monitor Resolution (PIXELS) 1366x768 1366x768 Monitor Certification - - Power Power Supply (Watt) - - Minimum Power Efficiency(%) 85 - Certification ROHS Compliance Yes - BEE/Energy Star for the given Model true - Input Devices Mouse Optical - Keyboard Standard - Generic Optical Drive N/A - Internal Speaker true - On Site OEM Warranty (Year) 3 3 (or higher) * Bold specifications are the golden parameters. Consignees and Quantity 2/4 S.No. Consignee Address Quantity Delivery Days 1 Giridhar Pithuji Shende 440001, Futala Lake Road, Nagpur 7 15

Executive Table

revolving chair Revolving Chair ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) N.A up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type NA Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest N.A - Ergonomic Seat Design true true, false Yes is better Back type height adjustable push back, height adjustable Backrest is made of two pcs injection Backrest is made of two pcs injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Chrome finish with 5 wheels Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels 2/5 Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material Steel Covered with Wooden Cladding steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material pressed and moulded plywood with polypropylene cover pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover N.A mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover N.A foam laminated mesh fabrics, Mesh Fabrics, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height 890 As per GeM Catalogue. 3/5 ±15mm Backrest Height ±15mm 500 As per GeM Catalogue. Backrest Width ±10mm 410 As per GeM Catalogue. Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 480 440, 520, 550, 460, 360 Seat Depth ±10 mm 460 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.8 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 680 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO 4/5 Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

Cordless screw driver Cordless Screw Driver ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values Performance parameters Number of Torque settings 1 As per GeM Catalogue. Maximum Torque in hard settings in Nm 5 5, 6, 7, 8, 9, 10, 14, 18, 22, 24 Maximum Torque in soft settings in Nm 1 1, 2, 3, 4, 5, 6 Variable speed false true, false No-load speed in rpm(with tolerance of +/- 25 rpm 150 150, 180, 200, 250, 300, 500, 600, 2000 Forward and Reverse feature false true, false Adjustable Clutch false true, false Handle type Pistol Pistol, Pivot, Straight, Straight with pivot head, T Type of Brake DISK - Trigger Lock false true, false Spindle lock mechanism false true, false Chuck size in Inches 1/4" 1/4", 1/2" Type of Battery Lithium-Ion Lithium-Ion, NI-Cd 1/3 Battery Voltage in volts 3.6 3.6, 10.8, 12, 14.4, 18 Battery Capacity in ampere hr 1.5 1.5, 1.3 Charging time in min 30 30, 60, 120 Battery protection for overload and overheating false true, false Whether screwdriver bit supplied false true, false No of Screwdriver bit supplied 4 4, 10 Details of screwdriver bit supplied DRILL BIT - HSS Drill bit supplies false true, false No of HSS Drill bit supplied (if not supplied put NA 1 1, NA Magnetic Bit holder false true, false Brushless Motor false true, false LED Light available for working in dark false true, false Soft rubber grip for fatigue free use false true, false Warranty in years 1 1, 5 Weight of the Cordless screwdriver in gms (including battery) 900 - Length of cordless screwdriver in mm 290 - Height of cordless screwdriver in mm 265 - Carry case supplies false true, false No of spare batteries supplied 1 1, 4 Charger supplied extra false true, false USB Charger available false true, false Certifications if any for the OEM BOSH * Bold specifications are the golden parameters. Consignees and Quantity 2/3 S.No. Consignee Address Quantity Delivery Days 1 Manish Singh Chauhan 482001, South Civil Lines, Home Guard and Civil Defense Headquarter, Jabalpur 60 30

breathing apparatus accessories or supplies re breathing bag Breathing Apparatus Accessories Or Supplies Re Breathing Bag ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values Indian standard and other details Conformity to Indian Standard IS: 11364: 1994: latest Yes - Product ISI Marked false - CM/L no NA - Material Antistatic good quality rubber material grade (ISO standard) - Operating Temperature range (deg C) -30°C to 60°C - Sizes (litres) 5 - Bag free from leakage Yes - Reusable yes - Certifications, markings and test reports details Certification available YES - Marking As per IS : 11364: 1994: latest - Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - 1/3 Test Report Date 27.11.2009 - Test Report No. 472/PB/2009/NO - Test reports to be furnished to buyer on demand yes - Name of the Lab Apave - Address of The Lab France - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manish Singh Chauhan 482001, South Civil Lines, Home Guard and Civil Defense Headquarter, Jabalpur 60 30

acoustic stethoscope Acoustic Stethoscope ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values CONFIGURATION Length of Y tubing (cm) 45 Recommended application Physical Assessment and Diagnosis Physical Assessment and Diagnosis, Limited Physical Assessment and Blood Pressure, Car diology, Physical Assessment, Diagnosis and cardiology Diameter of the Binaural tube 5 mm - Diaphragm type Fixed Fixed, Floating Chest piece material Stainless steel Aluminium, Stainless steel, Brass Material of snap on ring Plastic - Latex free product true Noise Isolation earpiece true Non chilling snap on ring provided on chest piece true Number of snap on ring provided 1 1, 2 Binaural spring true 1/4 provided Weight of the product (g) 400 Diameter of Chest piece(mm) 25 - Number of spare diaphragm provided 1 1, 2 Type of Stethoscope Adult Stethoscopes Adult Stethoscopes, Pediatric stethoscopes Binaural tube material Drawn Brass confirming to IS 407-1961 Drawn Brass confirming to IS 407-1961, Brass, St ainless steel, Aluminium alloy Diameter of Chest piece;Diaphragm Side (mm) 15 Tunable Diaphragm true Finish of Binaural tube Chrome plated over nickle conforming to Grade C of IS:1068-1958 Chrome plated over nickle conforming to Grade C of IS:1068-1958, Brass Anodized, Matt Anodized, Black anodized Outer diameter of Y tubing (mm) 20 Type of Chest piece Dual type Bell, Diaphragm, Dual type Detectable Sound frequency range (Hz) 1200 - Ear pieces material Bakelite Bakelite, PVC, Nylon Number of ID tag provided 1 1, 2 Material of the Spring Steel conforming to C55 of IS 1570-1961 Steel conforming to C55 of IS 1570-1961, N/A Over all dimension;Len gthxHeightxWidth (mmxmmxmm) 20x20x30 - Spare snap on ring Provided true Stethoscope design and manufacturing cofirms to IS 3391-1965 latest amendment true Material of Y tubing Latex free PVC Latex free PVC 2/4 Supply of free spare parts under warranty false Finish of chest piece Chrome plated over nickle conforming to Grade C of IS:1068-1958 Chrome plated over nickle conforming to Grade C of IS:1068-1958, Black anodized Diaphragm material Celluloid Celluloid, Plastic Spare ear piece provieded true Number of Free Services, if provided N/A 2, 3, 4, N/A Spare ID tag Provided true Type of Y tubing Single lumen Single lumen, Double lumen Test Report Date N/A - ID Tag provided true Number of spare Ear piece provided a set of two: 1 1, 2 Spare Diaphragm Provided true Warranty Scope Warranty on Product (Year(s)) 1 - Free Service Available during warranty false CERTIFICATION Firm Certified to ISO 9001:2008 or latest true ISI marked true Other Certifications N/A - CE marked true WHO-GMP certified true Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification true Test Report No. N/A - Name of the Lab N/A - Address of the Lab N/A - 3/4 PRODUCT DETAILS Product code available on supplier website true if Yes, Product code ST 002 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Manish Singh Chauhan 482001, South Civil Lines, Home Guard and Civil Defense Headquarter, Jabalpur 60 30

domestic refrigerators Domestic Refrigerators ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:1476 latest for Direct Cool IS:1476 latest for Direct Cool, IS:15750(2006) for Frost Free ISI marked false - CML No. 2890271 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 300 As per GeM Catalogue. Type of Door Double Double Insulation Polyurethane Puff, Polyurethane, Maxi 2, others Built in Voltage Stabilizer Yes - Method of Defrosting Direct Cool Direct Cool, Frost Free Performance BEE Star Rating as on date 5 5 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - Material Coil Material Copper (Cu) Copper (Cu) 1/4 Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour maroon As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 1 15

chairs-office

Smart Phone

sofas Sofas ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Total Number of Seats in the Sofa Set (Nos) 5 As per GeM Catalogue. Type of Sofa and Backrest Seat and Backrest are permanently fixed with the frame Structure - Number of Single Seater Units (Nos) 2 1, 2, 3, 4, 5, NO SINGLE SEATER UNIT Number of Two Seater Units (Nos) NO TWO SEATER UNIT 1, NO TWO SEATER UNIT Number of Three Seater Units (Nos) 1 1, NO THREE SEATER UNIT Number of Four Seater Units (Nos) NO FOUR SEATER UNITS 1, NO FOUR SEATER UNITS Frame Covering Partially Upholstered Fully Upholstered, Partially Upholstered, Fully Exposed Sofa Set is Foldable to use as bed false - Backrest Cushion Material foam - Density of Cushion of Backrest Material (Kg/Cubic M) 65 - 1/4 Covering Material for Seat and Backrest leather fabric fabric, rexin, leather fabric, Leatherite MATERIAL Frame Structure Material and size (±1 mm) 19mm thick Commercial Block Board BWP grade Conforming to IS 1659 18 mm teak plywood, 19 mm commercial board, teak wood of minimum 25 mm thickness, Carved Teak wood of minimum 25 mm thickness, MILD STEEL STRUCTURE, 19mm thick Commercial Block Board BWP grade Conforming to IS 1659, 19mm thick Decorative Block Board BWP grade Conforming to IS 1659, 19mm thick Commercial Block Board MR Grade Conforming to IS 1659, 19mm thick Decorative Block Board MR Grade Conforming to IS 1659, any other wood of minimum 25 mm thickness Seat Cusion Material foam foam, rubber Density of Cushion of Seat Material ±3 (Kg/Cubic M) 60 - Type of Spring in the Base/Seating eight way hand tied spring eight way hand tied spring, sinous spring, web suspension, checking couch spring, No Spring in the Base, Zig zag DIMENSION Length of Single Seater Units in mm (±5 mm) 750 400, 508, 570, 660, 700, 750, 800, 850, N.A Length of Two Seater Units in mm (±10 mm) N.A 800, 1000, 1100, 1220, 1370, 1400, 1500, 1600, 1750, N.A Length of Three Seater Units in mm (±10 mm) 1650 As per GeM Catalogue. Length of Four Seater Units in mm (±10 mm) N.A As per GeM Catalogue. Depth of Sofa Units in mm (±10 mm) 600 As per GeM Catalogue. 2/4 Sofa Height (Without Back Cushion) ±5 (mm) 550 - Sofa Height (With Back Cushion) ±5 mm 775 - Arm Width ±5 (mm) 100 - Arm Height ±5 (mm) 550 - Seat Height (With Seat Cushion) ±5 (mm) 450 - Sofa Leg Height ±2(mm) 100 - Sofa Leg Width Diameter ±2 (mm) 50 - Seat Cushion Length ±5 (mm) NA - Seat Cushion Width ±5 (mm) 510 - Seat Cusion Thickness ±5 (mm) 100 - Backrest Cushion Length ±5 (mm) 1050 - Backrest Cushion Width ±5 (mm) 710 - Backrest Cushion Thickness ±3 (mm) 100 - Thickness of Foam in arms ±2 (mm) 100 - Thickness of Foam in back ±2 (mm) 152 - Thickness of Foam in front ±2 (mm) 152 - Thickness of Foam in sides ±2 (mm) 152 - COLOUR & FINISH Colour of Polish on exposed Wood frame natural brown - Colour of Covering Material brown - WARRANTY WARRANTY PERIOD IN NUMBER OF YEARS 1 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Teekam Chand 312026, SHRI SANWALIYAJI 2 15 3/4 Meena GOVERNMENT COLLEGE MANDPHIYA

patient care beds for general use Average Turn Over of Last 3 Years 68 Lakh (s) Experience with Gov. Required 3 Year (s) Patient Care Beds For General Use ( 58 ) Technical Specifications Specification Specification Name Values Allowed Values DIMENSIONS OF MATTRESS PLATFORM & FRAME Length of mattress platform & Overall length of bed >=2100 mm & <=2150 mm >= 1900 mm & <=2000 mm, >=1950 mm & <= 2050 mm, >=2000 mm & <=2100 mm, >= 2050 mm & <=2100 mm, >=2100 mm & <=2150 mm, >= 2150 mm & <= 2200 mm, >= 2200 mm & <= 2250 mm Width of mattress platform >950 mm to 1000 mm 900 mm to 920 mm, >920 mm to 950 mm, >950 mm to 1000 mm, >1000 mm to 1050 mm Material of mattress platform surface CRCA Sheet CRCA Sheet, SS Height of mattress platform 620 - Mattress platform surface thickness 1.2 mm and above - 1/4 Type of mattress platform With Holes Perforated, With Holes BED Overall length of Bed(in mm): 2157 - FRAME section, dimensions, thickness and material MS ERW rectangular tube with 50 mmx30 mm or more, gauge 1.2 mm or more. - Frame width (in mm) 990 - Leg Shoe material Castors of 125 mm OR Neoprene Rubber - HEAD AND LEG BOARD Height of Head board measured from mattress platform 356 - Material of Leg board and head board Plastic SS laminated, MS tubular, Plastic Height of Leg board 356 - Pipe diameter of Head and Leg Boards 30 mm or more - Thickness of pipe of Head and Leg board 1.2 mm or more - MISC Maximum Load Capacity must be >= 150 Kg Yes - Painting Powder coated Powder coated Colour of Bed white - Provision of I.V. poles Holder Yes - Provision of Mosquito net pole Holder Yes - Other details Drawing available on Web. true - If Yes, Drawing No. HOS 133923 PSP A1 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gagandeep Singh Dhillon 171001, KNH Shimla 58 15

bathing soap Average Turn Over of Last 3 Years 10 Lakh (s) Bathing Soap ( 85000 ) Technical Specifications Specification Specification Name Values Allowed Values Certification Conforming to Indian Standard IS 13498:Latest Yes - BIS Marking false true, false Yes is better CML Number 9473970 - Test Report Details Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Yes, No Test Report Number 2738 - Test Report Date 10-Aug-2017 - Name of the Lab S A Encon Lab - Must declare (Write NA in case of NO against availability of Test Report) NA - Colour and Fragrance Colour red - Fragrance fresh - Weight Weight of Soap 125 125.0 1/2 (Gms) Packing Packing Material PAPER Number of Soaps in a Pack (Nos) 1 1 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sameer Rajaram Bramhane 411005, Pune Municipal Corporation, Near Mangala theater shivajinagr pune 85000 15

lead acid battery Lead Acid Battery ( 32 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Types of Lead Acid of Battery Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Small sized Valve Regulated Lead -Acid Batteries (SMF) conforming to JISC: 8702/1998 (Part 1, 2 & 3) with latest amendments Nominal Voltage of Battery (volts) 12.0 Volt 12.0 Volt Material of container Polypropylene Polypropylene Rated Capacity at C20 discharge (AH) 75 75 Warranty (Years) 2 Years 2 Years Battery Condition Charged - CONSTRUCTIONAL Dimensions (L x W x H) (mm x mm x mm) As per relevant IS Specifications - Volume of Electrolyte (ml) 4710 ML 1.120 Sp.Gr - Weight of Dry Battery (Kg) shall be as per relevant IS: Specn., corresponding Ah Yes. - No.of cells per Battery (No.) 6 Cells for 12 Volt battery - 1/3 CERTIFICATIONS Availability of Test Reports from Central Govt./NABL/ILAC accrediated Lab showing conformity to the specifications Yes - Address of the Lab AHMEDABAD - Name of the Lab EXIDE BANGLORE - Test Report No. 12345678 - Test Report Date 21/12/2017 - Compulsory Registration (CRS) of BIS for safety as per IS 16046 as applicable. Secondary Cells and (Batteries containing Alkaline or other non- acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 AMIT SHARMA 462001, Old Secretriate, Collector Office Bhopal 32 15

Line Intractive UPS with AVR Line Intractive UPS With AVR ( 10 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating in KVA/min VAH capacity of battery (KVA/VAH) 2.0/800 As per GeM Catalogue. Technology MOSFET-PWM MOSFET-PWM, IGBT- PWM Type of battery SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 SMF-VRLA confirming to JISC-8702 Pt 1, 2 &3 Rated Output (Volt) Single Phase Quasi-Sin- wave 230 V AC, 50 Hz Single phase sinewave 230v AC, 50Hz, Single Phase Quasi-Sin-wave 230 V AC, 50 Hz Degree of protection IP-21 IP-21, IP 20 Inverter Efficiency (%) >/= 60% >/= 60%, >/= 70% Warranty for the battery from the date of delivery 1 year 1 year, 3 Years Warranty for Line Interactive UPS 1 Year 1 Year, 2 Years, 5 Years, 3 Years Installation and commissioning instructions No - CONSTRUCTIONAL Type of enclosure Mild steel - AC out put for No Yes, No 1/4 printer (not through inverter) Inverter out put socket AC out put for printer (not through inverter) 2 Three pin 2 Three pin, 3 Three pin, Hard wiring, Not applicable FUNCTIONAL Total harmonic distorsion (%) </= 40% - Input (Volt) Single phase sinewave(160-280v) - Switching over time (Mili sec) Maximum 10 milli seconds - Overload Time (Minutes) >/= 10 minutes - Load power factor >/= 0.6 - Variation in AVR output in AC mode (%) AVR (Voltage regulation) output voltage in AC Mode 230 Volts +/-9%, 50 +/-3 Hz - Overload (%) >/=10% - Variation in output voltage in battery mode (%) (UPS output voltage in battery mode) 230 Volts +/- 10% - Variation on output frequency in battery mode (Hz) </=0.5 - PROTECTION Protection against (over discharge) discharge per 12v battery (Volt) 10.5 - Protection for outside input voltage range: If Input voltage goes outside the range 160 to 280 Volts, the system shall switch over to battery mode Yes - Protection against short circuit of UPS Yes - Protection for over voltage and over load Yes - REPORTS AND CERTIFICATIONS Damp heat Test at 45 degree, RH -95% for 2-cycle as per IS:9000 pt-5/sec-1 Yes - Dry heat Test at 45 Yes - 2/4 degree for 16 Hrs as per IS:9000 pt-3/sec-5 Cold Test as per IS:9000 pt-2/sec-4 Yes - Availability of the type test report from central Govt./NABL/ILAC Accredited Lab Yes - Type Test certificate no. and date - - Name Of Lab - - Address of Lab - - As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Not applicable presently - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Santosh Kumar Khabile 416416, Sangli - Miraj Road 10 15

backhoes

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Glass Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig With - Light Source SMD LED Chip - LED Make Edison 2835 0.2W - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde (CRI) >/= 80 - 1/3 Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date Registration/CRS/2015- 3196/R-78000515 Dated 25/01/2018 - Certificare for Luminaire photometric data as per LM79 Yes - Certificate No and Date of Luminaire HPLI/TEST/1705009901 Dated 25-05-2017 - 2/3 photometric data as per LM 79 report Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 100 15

Printer

automotive vehicles pneumatic tyres Automotive Vehicles Pneumatic Tyres ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Ungrouped Category Of Pneumatic tyres Normal Road Tyre Normal Road Tyre, Special use Tyre: mixed used, Restricted speed: snow tyre Tyres Tubeless With Tube, Tubeless, Without Tube Conformity to Indian Standrad for Pneumatic Tyres IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply IS:15627 latest for Automotive vehicles: Pneumatic tyre for two and three wheeled motor Vehicles, IS:15633 latest for Automotive vehicles: Pneumatic tyre for passenger car Vehicles- Diagonal and radial ply, IS:15636 latest for Automotive vehicles: Pneumatic tyre for commercial Vehicles- Diagonal and radial ply Conformity to Indian Standrad for Pneumatic Tubes NA for Tubeless TYRES IS:13098 latest for Automotive vehicles: Tubes for Pneumatic tyre, NA for Tubeless TYRES ISI MARKED (for Yes Yes 1/3 Tyres) CM/L No and validity date)(for Tyres - - ISI MARKED (for Tubes) NA for Tubeless and without tube Yes, NA for Tubeless and without tube CM/L No and validity date(for tubes) - - Type of tube NA for Tubeless and without tube - Manufactures name and Trade Name - - Tyre-size Designations 185/65 R15 - Tube-size Designations NA - Structure of Tyre Radial Diagonal or bias ply, Bias-belted, Radial, Reinforced or Extra Load Ply Rating RADIAL - Speed Category - - Load indicas - - Side Well (mm) 122 - Inner area of Tyers (mm) 112 - Section Width (min)(mm) 189 - Overall Width (max)(mm) 620 - Section Height (mm) 122 - Nominal Aspect Ratio(mm) 15 - Outer diameter (min)(mm) 620 Nominal Rim Diameter(mm) 15 Maximum load Rating(%) 560 Conformity to AIS-044 Yes - Availability of Type Test Report covering complete test parameters as per relevant BIS spcification latest for Tyre type, from any ILAC/NABL accredited/Central Gov. YES - 2/3 LAB. Test cetificate No. - - Test Report Date - - Name and address of the Lab where test Conducted - - Others Certificate ie ROHS, WHO, GMP etc - - Warranty Time 1 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Aniket Vijaykumar Dhopat 400030, Directorate of Municipal Administration, 3rd floor GTS building, near Worli RTO office, Sir Pochkhawala Road, Worli, Mumbai-30 4 15

All in one Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 5 Year (s) All In One ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values Processor Processor Make Intel - Processor Generation 7th 6th, 7th, 8th Processor Intel Core i3-7100 (3.9 GHz, 3 MB Cache, 2 Cores) As per GeM Catalogue. Chipset Chipset Intel H270 - Graphics Graphics type Integrated - Graphic Card Description HD - Storage Type of Hard disk drive SATA SATA, SSD, Fusion Hard Disk Drive Size (GB) 1000 500, 1000, 2000 Hard disk drive speed (RPM) 7200 - RAM Type of RAM DDR4 - RAM Size (GB) 4 4, 8, 16, 32 RAM Expandability Upto (GB) 16 8, 32, Not-Available 1/4 Ram speed (MHz) 2400 - Operating System Operating system Windows 10 Home Windows 10 Home, Windows 10 Professional, Linux, Mac OS Sierra, Mac OS High Sierra OS Certification Windows - Display Display Size (Inch) 21.5 Type of Display Non Touch Touch, Non Touch display resolution (Pixels) 1920 x 1080 with IPS Technology 1920 x 1080, 3200 x 1800, 1920 x 1080 with IPS Technology, Retina 4K Display (4096 x 2304) with IPS Technology, Retina 5K Display (5120 x 2880) with IPS Technology, 1600 x 900 TCO Certification Yes - Ports USB Port 2.0 (No.) 4 - USB Port 3.0 (No.) 2 - VGA Port Not-Available - HDMI Port Available - Thunderbolt Port (No.) Not-Available - Display Port Not-Available - Input Devices Keyboard Standard with USB Interface - Mouse Optical Scroll with USB Interface - Audio Integrated Stereo Sound with internal speakers & Mic. - Connectivity Wi-fi Connectivity 802.11 ac - Bluetooth Connectivity 4.0 or higher - LAN Port Integrated Gigabit Ethernet 10/100/1000 - Certification BIS Registration under CRS of Meity Yes - BIS Registration no - - Certifications Available Energy Star - ROHS Compliance Yes - Power Maximum Wattage (Watts) 65 - Power Efficiency (%) Minimum 80 - 2/4 Others Webcam HD - DVD R/W Not-Available - Optical drive External - Stand Standard - On Site OEM Warranty (Year) 1 1, 3, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Bhagawan Jagannath Jagadale 415001, Collector Office, Satara 2 15

Public place seating chair Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 7 Year (s) Public Place Seating Chair ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of Seating separate seat and backrest - Style with arm and backrest with arm and backrest, with arm and without backrest, without arm and with backrest, without arm and backrest Seating Capacity (Nos) 3 2, 3, 4, 5 Number of arms (Nos) 2 - Delivery status Assembled - Seat Cushion WITH CUSHION - Backrest Cushion WITH CUSHION - MATERIAL Material of Main Frame mild steel mild steel, M S ERW tube, SS 202, SS 304 Material of Seat and Backrest PU Foam reinforced with 2 mm M S sheet inserts Mild Steel, PU Foam reinforced with 2 mm M S sheet inserts, SS 304, MS RECTANGULAR SECTION PIPE, 1/4 Perforated MS sheet covered with 40 mm cushion cover. Material of Arms cold rolled steel armrest are made up of powder coated high pressure aluminium dye cast, cold rolled steel, MS ERW TUBE, MS RECTANGULAR SECTION PIPE Material of Legs cold rolled steel cold rolled steel, POWDER COATED HIGH PRESSURE ALUMINIUM DYE CAST LEGS, MS round pipe - 1.6 mm thick Material of Side Bar Bracket made up of chrome plated solid steel - Thickness of material of Main Frame in mm 1.2 - Thickness of material of Arms in mm 1.2 - Type of bolts M8 bolts - Thickness of PU Foam for Seat and Backrest ±2(mm) 20 mm - Density of PU Foam for Seat and Backrest ±2(Kg/Cubic Metre) 30 kg/Cubic Meter - Covering Material for Seat and Backrest NA - DIMENSION Overall Length in mm (±10 mm) 1655 As per GeM Catalogue. Overall Depth in mm ( ±5 mm) 500 As per GeM Catalogue. Overall Height in mm (±5 mm) 760 As per GeM Catalogue. Seat Height from Floor in mm (±5 mm) 425 mm - Thickness of material of Seat and Backrest (mm) 1.2 mm - CERTIFICATION Conforming to International YES YES, NO 2/4 Standard for Public Seating (*BIFMA X 5 dot 4 or equvalent) COLOUR & FINISH Colour of Covering Material black - All M S Strucure Finish Powder Coated - Colour of Paint black - All steel component to be epoxy powder coated 50 micron thick - WARANTEE WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 5 MISC Seat and Backrest are Perforated true - Adjuster for legs false - Arms Chrome Plated true - Legs Chrome Plated true - Cushion on Arms false - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Saraswat 326001, Government Girls College Opposite Kendriya Vidyalaya, Patan Road Jhalawar 5 15

Printer

seamless steel tube assembly-TUBULARS AND OTHER WROUGHT STEEL FITTINGS, RISER PIPE Seamless Steel Tube Assembly-TUBULARS AND OTHER WROUGHT STEEL FITTINGS, RISER PIPE ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Indian Standard IS 1239 (Part 1) latest Yes - Product ISI Marked Yes - CML number 8417881 - GENERAL Manufacturing Process of Pipe Electric Resistance Welded (ERW) Hot- finished seamless (HFS), Cold- finished seamless (CDS), Hot- finished welded (HFW), Electric Resistance Welded (ERW), High Frequency Induction Welded (HFIW) Ends of Pipes Screwed with Socket at one end and other end protected with plastic cap Plain Ends, Screwed with Socket at one end and other end protected with plastic cap, Screwed without Socket and both ends protected with plastic cap Manufacturing Process of Socket Electric Resistance Welded (ERW) Hot Finished Seamless (HFS), Hot Finished Welded (HFW), Electric 1/4 Resistance Welded (ERW), High Frequency Induction Welded (HFIW), Hand Welded, NA MATERIAL Material of Pipe Grade-2 of IS 10748/2004, Permissible as per IS 1239(Part 1) latest Grade-2 of IS 10748/2004, Grade-2 of IS 10748/2004, Permissible as per IS 1239(Part 1) latest Category of Steel Pipes Medium Light, Medium, Heavy Steel Pipe Galvanized true true, false Socket Conform to IS 1239 (Part 2) Latest YES YES, NA Type of Socket Welded Welded, Seamless, NA Socket Galvanized true true, false DIMENSION Nominal Bore of Steel Pipe (mm) 32 - Length of Pipe (Metre) 3.0 - Thickness of Pipe in mm 3.2 3.2 Tolerance in Pipe Length (mm) Yes - WEIGHT Weight of Pipe in Kg per meter (Plain end) 3.10 As per GeM Catalogue. Weight of Pipe in Kg per meter (Serewed and Socketed) 3.13 - MARKING Marking on the Pipe as for IS specification Yes - Year of Manufacturing Yes - Marking of Government Buyer and Name true - Test Report Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes - Test Report No. 1715006 - Test Report Date 26092017 - Name of the Lab Own fully equiped with NABL caliberated - 2/4 instruments Address of The Lab Village Tedesara PO Somni Distt. Rajnandgaon - Test report to be furnished to the buyer on demand Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shyam Rao Sonkusre 494334, O/o Executive Engineer, Public Health Engineering Division, Kanker 6 15

revolving chair Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 1 Year (s) Revolving Chair ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt central tilt Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support Backrest With Adjustable Lumber Support backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true true, false Yes is better 1/6 Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false true, false Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking N.A - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin 2/6 Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Proypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leatherite pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover Leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leatherite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, N.A 3/6 GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1220 As per GeM Catalogue. Backrest Height ±15mm 600 As per GeM Catalogue. Backrest Width ±10mm 550 As per GeM Catalogue. Seat Height ±15 mm 450 420, 450, 480, 500, 520 Seat Width ±10 mm 550 440, 520, 550, 460, 360 Seat Depth ±10 mm 550 400, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 0.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 18 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 18 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 680 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) N.A As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4-year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO OEM of offered product is ISO NO YES, NO 4/6 14001:2015 certified OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shamkant Tukaram Shelke 440006, Hazari Pahad Road, Seminary Hills, Nagpur 12 15

LED Luminaire (Recessed Luminaire), LED Luminaire (Recessed Lumina LED Luminaire (Recessed Luminaire) ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - Rating of Recess type LED Luminaire/System Wattage/Rated Power 18W As per GeM Catalogue. 1/19 Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Yes - Color temeprature (+/- 500 K) 3000 deg K - Type of fixture (in feet) 1x1 (for 18W to 28W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Acrylic - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 1 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes - The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - 2/19 OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes - Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +55 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients of >/=2.5 KV Yes - MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, Yes - 3/19 model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS Yes - 4/19 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report to the buyer on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive Engineer, (E&M) Public Works Department Sirpur Bhawan Parisar, Raipur. (C.G.) 100 15 LED Luminaire (Recessed Luminaire) ( 20 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules Type 3 - 5/19 as per the IS: 16103(Part-2)/2012 Rating of Recess type LED Luminaire/System Wattage/Rated Power 12W As per GeM Catalogue. Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 100 Lm/Watt for 6000 deg K Yes - Color temeprature (+/- 500 K) 6000 deg K - Type of fixture (in feet) 1x1 (for 18W to 28W) 1x1 (for 3W to 16W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Acrylic - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 1 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% Yes - 6/19 (for above 20W) The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +55 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients Yes - 7/19 of >/=2.5 KV MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, model number, and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the Yes - 8/19 LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller has to furnish Type test report to the buyer on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 20 15 LED Luminaire (Recessed Luminaire) ( 5 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - 9/19 DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - Rating of Recess type LED Luminaire/System Wattage/Rated Power 18W As per GeM Catalogue. Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 100 Lm/Watt for 6000 deg K Yes - Color temeprature (+/- 500 K) 6000 deg K - Type of fixture (in feet) 1x4 (30W to 48W) 1x1 (for 3W to 16W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Acrylic - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 1 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - 10/19 ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes - The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +55 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute Yes - 11/19 between supply terminals and body of the unit) Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients of >/=2.5 KV Yes - MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report Yes - 12/19 and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller has to furnish Type test report to the buyer on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, Raipur. (C.G.) 5 15 LED Luminaire (for Flood Light) ( 80 ) Technical Specifications Specification Specification Name Values Allowed Values 13/19 STANDARDS LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - Types of LED Luminaire as per the IS: 16107(Part-2 Sec.-1)/2012 Type B - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - LED Rating/System Wattage/Rated Power 20W As per GeM Catalogue. Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt - Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest IP65 - Mounting brackets (included) Adjustable - Warranty for free replacement (in Years) 2 - ELECTRICAL EFFICIENCY Input operating Voltage range and frequency 90 to 300 V olts AC at 50 Hz+/-2 Hz - Automatic Higher Cut off voltage above 300 volt Yes - Rated voltage 230 V AC 50 Hz - AC Power Factor at full load ≥ 0.95 - Driver Efficiency (in %age) ≥85 - Total Harmonics Distortion (in %age) ≤ 10 - "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" Yes - OPTICAL LED chip Efficacy ≥130 Lm/Watt - Colour temperature 6000K - 14/19 (+/-500K) Working life for LED (Minimum 50, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥70 - Beam Angle ≥120 - Optic lense materal (UV stabilised) (Write NA for without optic lense supply) NA - THERMAL MANAGEMENT Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature < 85 degC - Operating temperature range -10 deg C to +55 deg C - Operating Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - Over Voltage protection Yes - Reverse polarity Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients ( Internal) >/=4KV - The luminaire shall be protected against surges and transients of >/=10KV (External) No - CONSTRUCTIONAL The Luminaires casing/housing (single Yes - 15/19 piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity The luminaire body must be corrosion resistant epoxy powder coated Yes - All fastners must be of stainless steel Yes - The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest Yes - Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., Yes - Luminaries light transparency should be of Toughened glass Yes - Toughned transparent glass cover thickness >/=4 mm - Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes - Number of electronic control gear (power supplies) 1 No. 1 No., 2 Nos., 3 Nos., 4 Nos. Driver components shall be industrial grade or above Yes - PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more Yes - The Luminaires works on single phase three wires system (Phase, Neutral and Earth) Yes - 16/19 Suitable connector shall be provided for LED connection between driver output and LED Yes - Length of ISI marked three core wire (shall be provided along with supply of material) 50 cm - Light Source SMD LED Chip as per LM 80/IS16106 - MARKING "Manufactures Name and and brand on the aluminium die cast body Engraved/Embossed - Manufacturer’s name, serial number Yes - Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box Yes - The operation characteristics voltage and power be marked inside of each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make OSRAM/NICHIA/CREE SAMSUNG/SEOUL LUMILED/PHILIPS EDISON/SYSKA LUMENMAX EVERLIGHT BRIDGELUX NATIONSTAR/REFOND - System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer Yes - 17/19 (LM-79 report shall have total lumen output, ) LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 Yes - Seller has to furnish Type test report on demand by buyer/consignee Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Mukesh Shukla 492001, O/o Executive 80 15 18/19 Engineer, Raipur. (C.G.)

classroom chairs Classroom Chairs ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Chair Type Without Arms Without Arms, One Arm with fixed Writing pad on one side other side open, Fixed writing pad on one side and Arm on other side, Foldable Writing pad on One side and Arm on other side, Foldabe Writing Pad on One side with other side open Type of Seat and Backrest Made of Wood As per GeM Catalogue. Depth of Seat in mm (+/- 10 mm) 380 - Height of Seat in mm (+/- 10 mm) 480 - Width of Seat in mm (+/- 10 mm) 380 - Overall Chair Height in mm (+/- 10 mm) 850 - SEAT DETAILS Thickness of Cushion Used in Seat in mm (+/- 2 mm) No Cushion - 1/4 Density of Cushion Used in Seat (Kg/Cubic Metre) No Cushion - Material of Fabric of Seat Cover No Cusihion No Cover - BACKREST DETAILS Density of Cusion Used in Backrest (Kg/Cubic Metre) No Cushion - Thickness of Cushion in Backrest in mm (+/- 2 mm) No Cushion - Material of Fabric of Backrest Cover No ciushion no cover - Width of Backrest (mm) 400 - Height of Backrest (mm) 400 - SUPPORT/UNDER STRUCTURE Frame Material Mild Steel Pipe of diameter 25 mm and wall thickness 1.1 mm minimum As per GeM Catalogue. Under Storage provided below the Seat NO - Material of under storage NA - Length of Under Storage (mm) NA - Width of Under Storage (mm) NA - DEPTH of Under Storage (mm) NA - WRITING PAD DETAILS Writing Pad Material N.A - Writing Pad Size (Length X Width in mm) NA - MISC Colour of Fabric for Seat and Backrest brown - Finishing of Structure Stove enameled Paint - WARRANTY Warranty period in number of years 2 1, 2, 3, 4, 5 CERTIFICATION Test reports to be furnished to buyer on demand YES - Product having BIFMA certification NO YES, NO OEM of offered product is ISO 9001:2015 certified NO YES, NO 2/4 OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Teekam Chand Meena 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 100 15

portable hard disk Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 5 Year (s) Portable Hard Disk ( 6 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type External Portable External Portable Connectivity Wired Wired Digital Storage Capacity (TB) 2 2 Speed (rpm) 7200 7200 Data Transfer Rate (Gb/sec) 3 - OS Compatibility ALL OS - Interface Type A USB - Cloud Backup (for Wireless type) NA - Network Connectivity No - Password Protection Yes - External Power Required NA - Water Resistant No Yes, No Shock Resistant No Yes, No Backward Compatibility Yes - 1/3 Dimension (W x H x D) (mm x mm x mm) - - Weight (grams) 240 - Standard Accessories to be supplied with the Hard Disk - - Operating Temperature Range (Degree C) - - Operating Humidity ( % RH) - - Availability of Test Reports from Central Govt/NABL approved ILAC acredited lab to prove conformity to the specification (Test reports are to be furnished when demanded by buyer) No - If yes, Test Report Number and Date - - If yes, Name of the Lab NA - If yes, Address of the Lab NA - On Site OEM Warranty (Years) 3 1, 2, 3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Satish Chand Singhal 303303, GUPTESHWAR ROAD, DAUSA 6 15

Executive Computer Table

Class Room Desking and Seating Class Room Desking And Seating ( 32 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING ONLY TABLE/DESK, ONLY SEATING, INTEGRATED DESK CUM SEATING, INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK, ONLY TABLE/DESK WITH SHELF/STORAGE UNDER DESK Desking Configuration FOUR SEATER SINGLE SEATER, TWO SEATER, THREE SEATER, FOUR SEATER Length of Desking, Seating and Backrest (if provided) in mm (±10 mm) 1050 As per GeM Catalogue. DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 20 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S, P or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm As per GeM Catalogue. 1/5 thick balancing laminate on the other side Material of Support Structure or Side Pannel SS 202 STRUCTURE As per GeM Catalogue. Height of Desk Top in mm (±5 mm) 500 As per GeM Catalogue. Width of Desk Top in mm (± 5 mm) 350 As per GeM Catalogue. SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 25mm thick prelaminated plywood having 0.8 mm (± 0.2mm) thick prelaminated sheet As per GeM Catalogue. Material of Support Structure Side Panels of 19mm thick Decorative Block Board MR grade Conforming to IS 1659 and all plane sides edge banded with CP Teak Wood Lipping As per GeM Catalogue. Material of Seat Cushion 40 mm thick PU foam of density 40 gram per cubic cm 40 mm thick PU foam of density 40 gram per cubic cm, WITHOUT CUSHION, ONLY DESK NO SEATING Width of Seating in mm (±10 mm) 650 As per GeM Catalogue. Height of Seat in mm (±10 mm) 750 As per GeM Catalogue. Width of backrest if provided in mm (± 5 mm) 430 As per GeM Catalogue. Back Support for Seating of Same materail as Seating Provided with Cushion Provided with Cushion, Provided without cushion, back support not provided MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) YES - Colour of finish red - Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue - 2/5 Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 400 - WARRANTY Warranty period in number of years 5 1, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Lal Chand Bohra 332713, Sita Ram Modi Govt. Sanskrit College Chaoni Neem-Ka-Thane Distt., Sikar, Rajasthan 32 15

inverters solar inverter Inverters Solar Inverter ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Rating of inverter (KVA) 5.0 KVA 5.0 KVA ISI marked No Yes, No If ISI marked yes, CM/L No. must declare. If ISI mark No write NA NA - Nos. of phase single single, Three Inverter output wave form Pure sine wave Pure sine wave, Quasi sine wave Ingress protection rating of inverter IP 65 for outdoor use IP 65 for outdoor use, IP 23 for indoor use Built in protection for AC high/low voltage and frequency if connected to AC mains IP 65 for outdoor use IP 65 for outdoor use, IP 23 for indoor use Display Type LED LED, LCD Area required for installation of Solar panels with mounting structure (sq. mt) 20 - Material of mounting structure Galvanised steel Stainless steel, Galvanised steel, 1/5 Aluminium alloy CONSTRUCTIONAL Mode of operation Stand-alone - Switching device MOSFET IGBT, MOSFET Maximum power point tracking (MPPT) yes - Galvanic isolation between input DC and output AC yes - By-pass facility if connected to AC mains IP 65 for outdoor use - Display parameters like DC voltage (V) DC current (A) AC voltage(V) YES - Sequence of power drawing (1) SPV (2) AC MAINS (IF CONNECTED WITH AC POWER) (3) BATTERY BANK - Nos. of modules in an array (NOS.) 10 - Rating of individual PV module (Wp) 270 - Salt mist corrosion resistant material for body and frame of SPV module Galvanized steel Aluminium, Galvanized steel Provision for Solar generation meter yes - Provision for bidirectional meter (Net Meter) yes - Provision of anti rusting/non corrosive mounting structure yes - Sustainability of wind speed. (KM/Hr) 150 150, 200 Type of battery (KM/Hr) Tubular Gel VRLA, SMF, Tubular Gel Capacity of battery bank (VAH) 21600 - 3 stage battery charging (float, boost and equalize stage) for long life of the battery yes - Reverse polarity protection yes - Complete installation yes - 2/5 work to be done by supplier Gross weight of the inverter (kg) 21 - Reverse polarity protection for PV modules yes - FUNCTIONAL Inverter efficiency 85 - Total Harmonic distortion (%) 5 - Operating AC voltage range (Volts) 230 - Operating frequency range (Hz) 50 - Operating Temperature (degree cel) 40 - Operating relative humidity (%) 90 - Load power factor 0.5 - Output regulation at rated voltage Yes - Over load Protection 110% for 60 Seconds, 125% for 30 Seconds and 150% for 5 seconds yes - Efficiency of Solar panel (%) 70 - Battery backup time at rated load (Hour) 4 1, 2, 3, 4 Battery bank Voltage (Volt) 96 - CERTIFICATIONS Conformity of inverter to environmental testing conditions as per IEC 600688-2 (1, 14, 30) or equivalent BIS standard YES - 90% performance warranty for SPV (years) 10 - 80% performance warranty for SPV (years) 25 - TTC for PV module from any MNRE lab as per MNRE 2015-2016 yes - 3/5 OEM test report for indigenously produced PV module (s) yes - Availability of Type test report for inverter including environmental tests from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification yes - Test report number 1000071811 - Date of test report 1/6/2015 - Name and address of laboratory Luminous Power technology - Type test report to be furnished on buyers demand yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Teekam Chand Meena 312026, SHRI SANWALIYAJI GOVERNMENT COLLEGE MANDPHIYA 1 15

Restaurant Table

domestic refrigerators Domestic Refrigerators ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standrad IS:1476 latest for Direct Cool IS:1476 latest for Direct Cool, IS:15750(2006) for Frost Free ISI marked true - CML No. 7617783 - Capacity and Design features Storage Volume(NET CAPACITY) (Litres) 185 As per GeM Catalogue. Type of Door Single Single, Double Insulation Puff Puff, Polyurethane, Maxi 2, others Built in Voltage Stabilizer Yes - Method of Defrosting Frost Free Direct Cool, Frost Free Performance BEE Star Rating as on date 2 2, 3, 4, 5 Eco-friendly refrigerant yes - Compressor Power saver Compressor - Voltage Range at 43 degree Centigrade (Volts) 230 (tolerance 10%) - Material Coil Material Copper (Cu) Copper (Cu), 1/2 Aluminium (Al) Finish and Colour Type of Finish Metallic Metallic, Matt, Printed Design Colour Copper As per GeM Catalogue. * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Geeta Sharma 304001, Govt. College, Tonk Bahir Road, Tonk 1 15

Televisions

Tablet Based Biometric Attendance System

Electronic Lectern