Patiala Locomotive Works Tender Results

LABYRINTH SEALING RING DRIVE END FOR SIEMENS MAKE AC MOTOR TYPE 1TB2525 OTA 02 MOTOR. AS PER DRG NO 1/DMW/M/TM-622, ALT-X Make/Brand: PCI

1.5 Ton AC Condenser unit

HOUSING RING TO CLW DRG. NO. 1209-01.313-004 ALT.-2, & STR NO. CLW/2016/ELDO/M/STR/037 REV. 0. Accepted Make -BEC

WELDING PLATE FOR TRACTION MOTOR TYPE 6FRA 6068 OF ELECT. LOCO TO DRG. NO. 4TWD.096.068, ALT-4 , TO STR. NO. CLW/TM/17050, REV.1 TO PL. NO. 29942111 Brand: Self

KEY MULTIPLIER -2 FOR CONVERTER MODULE CAT NO. P/2/0280 & C&D NO. T020/083 TO CLW SPEC. NO. CLW/ES/3/0049 ALT- F AND STR NO. CLW/2023/ELDO/E/STR/162 REV.-0.

NOBILITY 250 mm x 370 mm Red Dak Pad with 4 Flappers Brand: NOBILITY (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687796194292 dt.11/08/2026)

Battery Operated Cordless Hot Air Gun as Per Technical specification (Enclosed) Offered Make/Brand:DEWALT DCE530N.

Seal, Old Part No. 1616715600, New Part No. 1837011451, Make : Atlas Copco, Suitable for Portable ATLAS COPCO Air compressor (Model No. GX-3)

FELT RING FOR ROLLER BEARING ARRANGEMENT

OXY.ACCETYLENE CUTTING NOZZLE

BRAKE GEAR ARRANGEMENT

1.Visitor Chairs. 2.Executive Tables.

SOLID LUG CUSHION TYRE

3 POLE POWER CONTACTOR WITH COIL VOLTAGE 415 VOLT AC 50 HZ ,70 AMP, 2 NO + 2 NC, DIN Rail or Screw Mounting. As per specification attached.

brother OEM Drum Manufactured by Brother International (India) Private Limited Brand: brother (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687713215575 dt.05/08/2

FUEL FILLING CONNECTION ARRGT FOR DETC/US AS PER DRAWING NO. DMW-DETC/US-9-0-014 ALT. Z. NOTE: FUEL FILLING CONNECTION ARRGT FOR DETC/US AS PER DRAWING NO. DMW-DETC/US-9-0-014 ALT. Z. NOTE: (1) ITEM

LEATHER LEG GAURD (L&R) 500 MM

FRAME ASSY CA-6 TO DRG NO. EMD PART NO. 40051883, 40012289 TO SPEC. EMS-570 REV- AD ,EMS - 55 REV- F Make/Brand: OWN MAKE

Table for cleaning of bogie MSU Tubes Components as per drawing no. ET-0446. Make Brand: PEW

FLANGE ASSEMBLY FOR BRAKE CYLINDER (FOR WAG9HC & WAP-7) TO CLW DRG. NO. 1209-12.317-001 ALT. 0 & STR NO. CLW/2023/ELDO/M/STR/158 REV. 0. Accepted Make - USM

SET OF SUPPORT AS PER SET LIST NO. EL29612196 REV-1 TO CLW SPEC. NO. CLW/ES/3/0159, ALT.-H, AND STR NO. CLW/2015/ELDO/M/STR/58, REV-0. Accepted Make - OWN

Fire Extinguisher

BACK REST LOCK TO DRG. NO. ICF/STD-6-1-008, COL-I, ALT.-g. Make Brand : SSEW

Direct operated pressure relief valve DPRH 10 S315-04, Make : Polyhydron or equivalent in all respect

ENZALUTAMIDE 40 MG TAB.

CAST STEEL SHOTS S-330

ETANERCEPT 50 MG INJ.

LOCK ASSEMBLY

LATCHING PUSH BUTTON

MACHINED TERMINAL BOX ASSLY, FOR TRACTION MOTOR TYPE 6FRA 6068 OF ELECT. LOCO TO DRG. NO. 3TWD.096.059, ALT.4, SPEC. NO. 4TMS.096.055, REV.1 & STR. NO. CLW/TM/18310, REV.-1. Make barnd: ALPHA

Cable stripper for Single core cable as per specification no.: CLW/ES/3/0458 (Nominal cross section: 70 mm sq., Overall cable diameter: 16.50 +/- 0.4 mm, Conductor core diameter: 11.5 mm, Insulation t

SNAP GAUGE OF RANGE 300-325 mm ALONG WITH ABSOLUTE DIGIMATIC INDICATOR MITUTOYO CODE 543-390 B OR EQUIVALENT. (AS PER TECHNICAL SPECIFICATION NO- PLW/TMS/NS/26-27 attached.)

Pidilite Grade 1 M-Seal 1 kilogram Brand: Pidilite (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687728645835 dt.20/07/2026)

DETERGENT CAKE

03 types of gauge

WELDING CABLE

Two Types of Safety Slings

Electrical Work required for "Repair and rewinding of 1750 KVA TA/TM 630/2600- 716V (20-72 Hz) Test Bed Transformer installed at TMS shop in Workshop area, PLW/Patiala".

FILTER PAPER ROLL

Tacrolimus 0.5 mg TAB/CAP.

XL HBA1C WITH CALIBRATOR 2X15/2X5ML

HDL CHOLESTEROL KIT (4*30ML/4*10ML ) WITH CALIBRATOR.

TWO TYPES OF EXTERIOR PAINT

HSS ,H&G. Thread long shank M/C Tape size M36X2MM Pitch as per Spec. IS 6175:PT4:1991. Note : Firm is advised to approve sample by the consignee before bulk supply.

FINISHING VARNISH FV5420/FINISHING VARNISH (TVA1410) CONFORMING TO SPECIFICATION HITACHI-AO-209; RDSO/2008/EL/SPEC/081,REV-0,DECEMBER-2008 (SHELF LIFE MIN.05 MONTHS ON THE DATE OF RECEIPT OF MATERIAL)

POLYAMIDE (NOMEX-TYPE-410) STRIPS SIZE 0.25MM THK X 9 +0.02-0.4 MM WIDTH X 507+/-0.2 MM LONG, FOR TRACTION MOTOR TYPE 6FRA6068 OF ELECT. LOCO . TO DRG. NO. 4TWD.096.169, REF-3, ALT.2, SPEC. NO. 4TMS.0

AIR BOX ASM TO DRG NO. 40046400 TO SPEC. EMS 56 REV-F,EMS 606 REV-A,EMS 803 REV-J,MS 4361 REV-AA Make/Brand: OWN MAKE

LED BASED ELECTRICAL SIGNAL EXCHANGE SYSTEM

KIT CONSISTING OF 05 ITEMS AS PER ANNEXURE-A & DRG. NO. CLW-1TWD-095-098 ALT-4 (REF NO. 1,7,8,9 & 29), Specification No. 4TMS.095.036 Rev-1 & STR No. RDSO/2007/EL/STR/0017 Rev-1 as per IS:2062-92,GR-B

SILICON RUBBER TAPE HTV-HTB-HS, SIZE 0.5 MM X 25 MM WIDE IN ROLLS OF 20 MTRS. CONFORMING TO SPECIFICATION NO. AO-128,ALT.NO-B.SHELF LIFE 06 MONTHS FROM THE DATE OF DELIVERY. Make/Brand: OWN MAKE