Pmo Tenders

Supply of Amplifier IC with Heatsink and IC Socket

SUPPLY OF TOILETRIES AND CLEANING MATERIALS

Positive Temperature Co-efficient sensor, Oil Level Switch, Valve Coil

SAG MEASUREMENT HEAD/TOOL FOR INSPECTION OF CALANDRIA TUBE OF 540MWE PHWR, ULTRASONIC TESTING (UT) INSPECTION HEAD/TOOL FOR INSPECTION OF CALANDRIA TUBE OF 540 MWe PHWR, EDDY CURRENT TESTING (ECT) INSPECTION HEAD/TOOL FOR INSPECTION OF CALANDRIA TUBE OF 540 MWe PHWR

A25 Traub Metallic Collet As Per IS 6238-1971 Size 25 Mm Dia Suitable To A25 As Per Annexure, Quick Action Collet Suitable To A25 Type Lever Operated, Size 12 Mm Dia As Per Annexure Attached, Quick Action Collet Suitable To A25 Type Lever Operated Chuck, Size 14.80 Mm Dia As Per Annexure

Polarized Benchtop Energy Dispersive X-Ray Fluorescence Spectrometer

Jubilee Clamp 3 by 8 Inch, Jubilee Clamp 1 by 2 Inch, Jubilee Clamp 3 by 4 Inch, Jubilee Clamp 1 Inch, Jubilee Clamp 1-1 by 2 Inch, Jubilee Clamp 2 Inch, Jubilee Clamp 2- 1 by 2 Inch

Motor Insurance Service - 4 wheeler, 6 wheeler; 1001 to 1500 CC, 1501 to 2500 CC, Above 2500 CC

Supply and delivery of 9Volt Alkaline Manganese Dioxide Battery

Custom Bid for Services - REPLACEMENT OF CORRODED STRUCTURAL STEEL & MS OR MSRL PIPE LINES IN CHEMICAL HOUSE AREA AT JADUGUDA MILL Similar Category Repair, Maintenance and Installation of Plant Systems/Equipments

Bronze Bush as per Drg No 2218 for Under Vehicle, Stopper Pad as per Drg No 2232 for Under Vehicle, Pressure Screw as per Drg No 2234 for Under Vehicle, Plain Washer as per Drg No 2235 for Under Vehicle, Plain Washer as per Drg No 2236 for Under Vehicle, Plain Washer as per Drg No 2237 for Under Vehicle, Plain Washer as per Drg No 2238 for Under Vehicle, Oil Plug as per Drg No 2239 for Under Vehicle, Dowety Bonded Seal 3 by 8 Inch BSP for Under Vehicle, Lock Ring as per Drg No 2240 for Under Vehicle

Semiconductor Devices and Components

100 Pair PIJF Copper Telecommunication cable. Specifications as per Annexure

0.5 Inch G.I. Nipple 3 Inch long both side male threaded, 0.5 Inch G.I. Nipple 5 Inch long both side male threaded, 3 by 4 Inch G.I. Nipple 3 Inch long both side male threaded, 3 by 4 Inch G.I. Nipple 5 Inch long both side male threaded, 1 Inch G.I. Nipple 5 Inch long both side male threaded, 1 Inch G.I. Nipple 6 Inch long both side male threaded, 1 Inch G.I. Nipple 8 Inch long both side male threaded, 2 Inch G.I. Nipple 5 Inch long both side male threaded, 2 Inch G.I. Nipple 6 Inch long both side male threaded, 2 Inch G.I. Nipple 8 Inch long both side male threaded, 2.5 Inch G.I. Nipple 8 Inch long both side male threaded

Spares for PHT system control valves

Spares for TSP Disintegrator, TSP Disintegrator rotor i. e. Impeller with Balancing, Rotor Casing, Base for Bearings (DE & NDE)

Supply of spares for Primary Blower of Ball mill

Transmission Filter Part No. 0660D010BH4HC/DHD660H10B, Hydraulic Ret. Filter Part No. 0650D01BH4HC/DHD650H10B

Industrial Safety Glove/Gauntlet (V2) (Q3)

Portable Vacuum interrupter tester with two hand control switches and with accessories

1200V Discrete IGBT co-packed with full rated current and ultra fast recovery diode

Nylon Braided PVC Hose Pipe

Nickel Agitator & its Arms for T-103 A & B.

Swagelok make SS Fittings

Draw Wire Linear Position Sensor (compact string Potentiometer with voltage divider output) .

Sal Wood Batten, Size: 7 ft. X 4” X 3”

Cable 100532

EXTENDED HALF LIFE FACTOR VIII 1000IU

Supply of L And T make gate valves

Chain Link 0358

Pulse Chemisorption with Temperature Programmed Desorption, Reduction & Oxidation (PC-TPDRO) system

Carbon Brush, Grade- M145E

RNeasy Micro Kit (50 reactions)

Handling and Transport on Lumpsum Basis - Excavation, heaping, stacking of mineral sand, loading and Transporta- tion of mineral sand from Re.sy.no. 433, 437 and 440 of Ayanivelikulangara village to IREL, Chavara plant on zero moisture basis – For 25, .., Handling and Transport on Lumpsum Basis - Mechanical loading, Transportation and leveling of tails sand from IREL Chavara plant to the excavated pits at Re.sy.no. 433, 437 and 440 of Ayanivelikulangara village on zero moisture basis – For 30, 000 T

Galvanized Steel Sheets (Plain and Corrugated) (V2) as per IS 277 (Q2) (3 (3 ))

BOOK, EXERCISE

Handling and Transport on Lumpsum Basis - Mechanical loading and transportation of spiral output from Vellanathuruthu mining site to IREL, Chavara through KMML lease area on zero moisture basis For 36000 ton

Gate End Box101665

Rubber expansion joint for NAPW pump discharge

Non-Aadhaar Based Biometric Attendance System (Q2)

Cable Joint Kit Suitable for Cables Up to and Including 33 kV (V2) (Q3) (3 (3 ))

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) ( ( 3 3 ))

Mechanical Seal, Make: WILO, Model: 14/16 ALE MK 1, Model: SCP 150-530HA, Model: SCP150-390HA, Model: SCP250-450HA

High Resolution Area Scan Camera with 10 GigE Interface for

Hard Disk compatible for crompton Greaves make EPABX system Model NE- 1200

Main Board with Display for Aczet Analytical Balance

FABRICATION AND INSTALLATION OF DISTRIBUTION SYSTEM FOR RE-CIRCULATION OF LOW CONDUCTIVITY WATER THR

MONITOR

1 INCH NB SCH 40 INCONEL 600, SEAMLESS PIPE AS PER THE, SPECIFICATIONS GIVEN IN ANNEXURE, 3 by 8 INCH NB SCH 40 INCONEL 600, 1 inch class 150 Forged Inconel 600 Blind Flanges of BLRF configuration conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.5., 0.5 inch class 150 Forged Inconel 600 Blind Flanges of BLRF configuration conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.5., 3 by 8 inch class 150 Forged Inconel 600 Blind Flanges of BLRF configuration conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.5., 1 inch class 3000 Forged Inconel 600 socket welded type elbows conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 0.5 inch class 3000 Forged Inconel 600 socket welded type elbows conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 3 by 8 inch class 3000 Forged Inconel 600 socket welded type elbows conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 1 inch class 3000 Forged Inconel 600 socket welded type Equal Tee conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 0.5 inch class 3000 Forged Inconel 600 socket welded type Equal Tee conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 3 by 8 inch class 3000 Forged Inconel 600 socket welded type Equal Tee conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 1 inch to 0.5 inch class 3000 Forged Inconel 600 socket welded type Reducing Tee conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11., 0.5 inch to 3 by 8 inch class 3000 Forged Inconel 600 socket welded type Reducing Tee conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.11, 1 inch to 0.5 inch Sch 40 Forged Inconel 600 seamless Concentric Reducer conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.9., 0.5 inch to 3 by 8 inch Sch 40 Forged Inconel 600 seamless Concentric Reducer conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.9., 1 inch class 150 Forged Inconel 600 Flanges of SORF configuration conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.5., 0.5 inch class 150 Forged Inconel 600 Flanges of SORF configuration confirming to ASTM B564 UNS N06600 and dimensions as per ASME B16.5., 3 by 8 inch class 150 Forged Inconel 600 Flanges of SORF configuration conforming to ASTM B564 UNS N06600 and dimensions as per ASME B16.5.

Proposal for installation of GI pipes and connections at UCIL