Pmo Tender Results

Radiator with oil cooler includes shroud P. No. 25174002SD00057, Radiator with oil cooler & Inter cooler P. No. 25174897DG08914 (76HP Ashok Leyland Engine)

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Office Suite Software (V3) (Q2) (PACOnly)

Nucleic Acid Sequencing and Genotyping Service - Microbial genome; Microbes/Meta Genome; undefined, Nucleic acids (DNA or RNA); To be collected by the service provider from the buyer; Pac Bio; 99%; 100x; 2; Tertiary analysis; Physical media, Cloud ..

Hydrochloric Acid (V3) Conformingto IS265 (Q3)

Gasket Sheet-IS: 11149 (Q3)

DOUBLE GIRDER EOT CRANE ALONG WITH, RAILS AND SHROUDED BUS BAR. AS PER ANNEXURE ATTACHED

Professional Large Format Display (V2) (Q2)

Cellulose Chromatography Paper Rolls

Tourniquet Machine (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC), OEM Authorization Certificate, Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) -- Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6551641 Dated : 25-08-2025 Bid Document 1/9, -- Number of days for which Bid would be auto -- extended 7 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 3 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India EMD Amount 11000 ePBG Detail Advisory Bank State Bank of India (%) ePBG Percentage(%) 5.00 ( ) Duration of ePBG required (Months). 28 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b)., EMD & Performance securityshould be in favour of Beneficiary, wherever it is applicable. Beneficiary : DIRECTOR ACTREC Tata Memorial Centre - Advanced Centre For Treatment, Research And Education In Cancer (actrec), Department 2/9 of Atomic Energy, N/A, PMO (Director Actrec) Splitting

Custom Bid for Services - Hiring of Vehicles for Scheduled Trips - Sedan Car, Hatchback Car, 12 Seater and 41 Seater Bus Similar Category Vehicle Hiring Service - Per Vehicle-Day basis

Supply of PLC based system as per our specifications

Digital Storage Oscilloscope (Q3) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

Microchannel Plate based Photomultiplier Tube

Industry Unit; Sl No 10 Modification and fabrication of Structural Steel Support structure as per suit to site condition; As per tender conditions, Repair, Maintenance, and Installation of Plant/Systems/Equipments (Version 2) - Industry Unit; Sl No 11 Fabrication and erection of Structural Steel Support structure including supply of structural material (Carbon Steel) as per the site requireme.., and Installation of Plant/Systems/Equipments (Version 2) - Industry Unit; Sl No 12 Cutting, removal and shifting of temporary structural steel support structure provided for sodium pipelines at RCB and SGB 1 and 2; As per tend.., and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Sl No 13 Removal of hydraulic snubbers from pipeline, including removal of pipe support clamps at various elevations inside RCB and SGB 1 and 2; As per t.., and Installation of Plant/Systems/Equipments (Version 2) - Industry Unit; Sl No 14 Refixing of hydraulic snubbers on pipeline, including installation of pipe support clamps at various elevations inside RCB and SGB 1 and 2; A.., and Installation of Plant/Systems/Equipments (Version 2) - Industry Unit; Sl No 15 Erection of sodium pipe Support with support clamps; As per tender conditions, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Sl No 16 Load adjustment of Spring support variable in Sodium system at SGB 1 and 2; As per tender conditions, and Installation of Plant/Systems/Equipments (Version 2) - Industry Unit; Sl No 17 Installation and removal of scaffolding (including arrangement of scaffolding pipes, jolly and clamps) upto 10m height with retention period o.., and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Sl No 18 Radiography testing using Se 75 Ir 192 as per site requirements; As per tender conditions, and Installation of Plant/Systems/Equipments (Version 2) - Industry Unit; Sl No 19 Fabrication and supply of 3 bolt clamp - type RP5 15 2 570; As per tender conditions, and Installation of Plant Systems/Equipments (Version 2) - Industry Unit; Sl No 20 Fabrication and supply of 3 bolt clamp - type RP5 20 2 570; As per tender conditions

High End Desktop Computer (Q2)

High End Desktop Computer (Q2)

Viscometer (Q3)

A3 Size Multifunction Printer (MFP) (Q2)

Supply Including Installation of loadcell based electronic belt weigher & Accessories

Supply of HSS Taper shank twist Drill diameter 3 mm H8 Tolerance, Supply of HSS Taper shank twist Drill diameter 3.2 mm H8 Tolerance, Supply of HSS Taper shank twist Drill diameter 9 by 64 inch H8 Tolerance, Supply of HSS Taper shank twist Drill diameter 4 mm H8 Tolerance, Supply of HSS Taper shank twist Drill diameter 4.2 mm H8 Tolerance, Supply of HSS Taper shank twist Drill diameter 5 mm H8 Tolerance, Supply of HSS Taper shank twist Drill diameter 6 mm H8 Tolerance

Spare Parts of Balancing Machine Schenck mak

SPARES FOR TECHNOFOUR MAKE SG ECT ROBOTIC

Anhydrous Ammonia Gr-II As Per IS: 662 as per specifications

F&S OF Gas Cylinder Storage stand (wall mounted) suitable to accommodate 4 nos. of vertical cylinder

Spares for Godrej Forklift 3 Ton and 8 Ton Quantity

Support part for sliding contact of 1600 Amps, 415V Air Circuit Breaker as per attached Annexure-I.

Manually Operated XY Manipulator for UHV, Manually Operated Rotary Motion Feedthrough for UHV

Graphical Programming Software (LabVIEW)

Flexible Polyurethane tube with accessories suitable for compressed air system

PFPE oil with free of additives

Silicon Diode Sensor

Precision Motorized XZ Translational Stages

Variable Frequency Drive (VFD), CG make, Emotron VFX 2.1, 75KW Heavy Duty

Customized AMC/CMC for Pre-owned Products - AMC of Atomic Absorption Spectrometer Analytik Jena NOVAA 800F; Atomic Absorption Spectrometer Analytik Jena NOVAA 800F; Annual Maintenance Contract (AMC); two regular maintenance visits paid and one emerge..

Rewinding of 3 Phase LT Motors up to 01 KW, Rewinding of 3 Phase LT Motor of 1, 1 to 2 KW, Rewinding of 3 Phase LT Motors of 2.2 to 3 KW, Rewinding of 3 Phase LT Motors of 3.7 KW, Rewinding of 3 Phase LT Motors of 5.5 KW, Rewinding of 3 Phase LT Motors of 7.5 KW, Rewinding of 3 Phase LT Motors of 9.3 KW, Rewinding of 3 Phase LT Motors of 11 KW, Rewinding of 3 Phase LT Motors of 15 KW, Rewinding of 3 Phase LT Motors of 18.5 KW, Rewinding of 3 Phase LT Motors of 22 KW, Rewinding of 3 Phase LT Motors of 30 kw, Rewinding of 3 Phase LT Motors of 37 kw, Rewinding of 3 Phase LT Motors of 45 KW, Rewinding of 3 Phase LT Motors of 55 KW, Rewinding of 3 Phase LT Motors of 75 KW, Rewinding of 3 Phase LT Motors of 90 KW, Rewinding of 3 Phase LT Motors of 132 KW, Rewinding of 3 Phase LT Motors of 150 KW, Rewinding of 3 Phase LT Motors of 160 KW, Rewinding of 3 Phase LT Motors of 180 KW, Rewinding of 3 Phase LT Motors of 200 KW, Rewinding of 1 Phase ceiling fans, Rewinding of 1 Phase LT Motors up to 3 KW, Repairing of 132 KW to 200 KW Motors, Repairing of motor shaft up to 7.5 KW, Repairing of motor shaft from 9.3 KW to 30 KW

Endpoint Detection and Response (EDR) Appliance Software (Q2) ( PAC Only ) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Tube axial exhaust fan along with necessary accessories

Database Management System Software (V3) (Q2) ( PAC Only )

Toner Cartridges/Ink Cartridges/Consumablesfor Printers (Q2) (PACOnly)

Gear oil 600 XP 320, Multi-purpose grease Mobil XHP 222, Mobil temp SHC 460 special Grease

Architect Vitamin D3

Contamination monitor (Q3) MSE Relaxation for Years Of Experience and Turnover Yes | Complete Startup Relaxation for Years Of Experience and Turnover Yes | Complete

Liquid Nitrogen (In Kg) (Q3)

Surgical Face Masks Conformingto IS16289 (Q2)

Polyester Round Slings (Q4)

Line Operated Three Phase AC Motors (Induction Motor) ISIMarked To IS12615 (Q3)

Penny & Giles Make, Current Output Card(4-20mA) For UCM, Penny & Giles Make: Universal Conditoning, Module For DVT, Part No: UCM

Steel Metal tags for I&C used in acid application

Electronet make encapsulated glass reed switch for use in safety system check valves