Loading
Loading…
Loading…
89 results • Latest
Wet Grinder
hdpe pipes for water supply Hdpe Pipes For Water Supply ( 17000 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked true true CM/L No 7395589 - Raw Material Material Virgin - Material Grade PE 100 PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 10 PN 10 Nominal Diameter (mm) 32 32 Length of Pipe (Metre) 500 1, 2, 3, 4, 5, 10, 15, 20, 25, 5 0, 75, 100, 250, 500, 750, 1000 Supply Type and Colour Supply Type Coils Coils, Length Colour of Pipe black - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/2 Test Report No WIS100/023 - Test Report Date 05/12/2017 - Name of the Lab INHOUSE - Address of the Lab FACTORY ADDRESS - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 17000 15 EMD Required No ePBG Required No
revolving chair Revolving Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back As per GeM Catalogue. Tilt Tension Adjustment false - Height Adjustment ± 5(mm) up to 120 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable backrest has separate adjustable false 1/5 headrest Seat type fixed fixed, sliding Seat is curved false - Locking mechanism true - Type of locking tilt limitor - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support N.A integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels 2/5 Arm Material 19 mm (+/- 2 mm) round SS pipe with cushion steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam Covered With pure leather pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 35 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 35 - Material of Fabric Back Cover leatherite mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover leatherite foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) N.A - DIMENSION Overall Chair Height ±15mm 1125 As per GeM Catalogue. Backrest Height ±15mm 730 As per GeM Catalogue. 3/5 Backrest Width ±10mm 480 As per GeM Catalogue. Seat Height ±15 mm 420 420, 450, 480, 500, 520 Seat Width ±10 mm 500 440, 520, 550, 4 60, 360 Seat Depth ±10 mm 500 400, 460, 5 50, 420, 440, 540, 360 Thickness of M S Plate Joining the under structure with Seat 1 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 15 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) 15 mm 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 30 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) 30 mm As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified NO YES, NO OEM of offered product is ISO 18001:2007 certified NO YES, NO Green guard certification NO YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. 4/5 Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 15 15
hdpe pipes for water supply Hdpe Pipes For Water Supply ( 27050 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked true true CM/L No 7395589 - Raw Material Material Virgin - Material Grade PE 100 PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 10 PN 10 Nominal Diameter (mm) 40 40 Length of Pipe (Metre) 250 1, 2, 3, 4, 5, 10, 15, 20, 25, 5 0, 75, 100, 250, 500, 750, 1000 Supply Type and Colour Supply Type Coils Coils, Length Colour of Pipe black - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/2 Test Report No WIS100/037 - Test Report Date 28/02/2018 - Name of the Lab INHOUSE - Address of the Lab FACTORY ADDRESS - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 27050 15 EMD Required No ePBG Required No
hdpe pipes for water supply Hdpe Pipes For Water Supply ( 27050 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked true true CM/L No 7395589 - Raw Material Material Virgin - Material Grade PE 100 PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 10 PN 10 Nominal Diameter (mm) 40 40 Length of Pipe (Metre) 250 1, 2, 3, 4, 5, 10, 15, 20, 25, 5 0, 75, 100, 250, 500, 750, 1000 Supply Type and Colour Supply Type Coils Coils, Length Colour of Pipe black - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/2 Test Report No WIS100/037 - Test Report Date 28/02/2018 - Name of the Lab INHOUSE - Address of the Lab FACTORY ADDRESS - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 27050 15 EMD Required No ePBG Required No
hdpe pipes for water supply Hdpe Pipes For Water Supply ( 27000 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked true true CM/L No 7395589 - Raw Material Material Virgin - Material Grade PE 100 PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 10 PN 10 Nominal Diameter (mm) 40 40 Length of Pipe (Metre) 250 1, 2, 3, 4, 5, 10, 15, 20, 25, 5 0, 75, 100, 250, 500, 750, 1000 Supply Type and Colour Supply Type Coils Coils, Length Colour of Pipe black - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/2 Test Report No WIS100/037 - Test Report Date 28/02/2018 - Name of the Lab INHOUSE - Address of the Lab FACTORY ADDRESS - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 27000 15 EMD Required No ePBG Required No
hdpe pipes for water supply Hdpe Pipes For Water Supply ( 34200 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked true true CM/L No 2597677 - Raw Material Material Virgin - Material Grade PE 100 PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 10 PN 10 Nominal Diameter (mm) 50 50 Length of Pipe (Metre) 1 1 Supply Type and Colour Supply Type Length Length Colour of Pipe blue - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/2 Test Report No 100-150207-06 - Test Report Date 16.02.2015 - Name of the Lab AS PER REPORT - Address of the Lab AS PER REPORT - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 34200 15 EMD Required No ePBG Required No
hdpe pipes for water supply Hdpe Pipes For Water Supply ( 3050 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Conformity to Indian Standard IS 4984 Latest Yes - ISI Marked true true CM/L No 2597677 - Raw Material Material Virgin - Material Grade PE 100 PE 100 Dimensions Pressure Rating at 30 degree Centigrate PN 10 PN 10 Nominal Diameter (mm) 63 63 Length of Pipe (Metre) 1 1 Supply Type and Colour Supply Type Length Length Colour of Pipe blue - Test Report Availability of Test Reports of from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES - 1/2 Test Report No 100-150207-09 - Test Report Date 16.02.2015 - Name of the Lab AS PER REPORT - Address of the Lab AS PER REEPORT - Test Report to be furnished on request by Buyer Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 3050 15 EMD Required No ePBG Required No
Desktops
plastic moulded chair Plastic Moulded Chair ( 100 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC TYPE OF CHAIR SINGLE PIECE PLASTIC MOULDED SINGLE PIECE PLASTIC MOULDED, PLASTIC MOULDED SEAT CUM BACK WITH SUPPORT STRUCTURE, SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE Seat cushion Without With, Without Back Cushion With With, Without Conformity to Indian Standard IS 13713- Latest false - Plastic Material PVC (Polyvinyl Chloride) FILLED THERMOPLASTI C, UNFILLED THERMOPLASTIC, FILLE D THERMOSETTING PLASTIC, UNFILLED THERMOSETTING PLAS TIC, POLYPROPELENE, PV C (Polyvinyl Chloride), ABS PLASTIC (Acylonitrile Butadiene Styrene) ARMS With arms With arms, Without arms 1/4 DIMENSION & WEIGHT Seat Width in mm (+/- 5 mm) 570 345, 365, 385, 400, 415, 4 25, 455, 475, 500, 510, 52 0, 530, 540, 550, 560, 570 Seat Depth in mm (+/- 5 mm) 560 340, 360, 380, 410, 4 20, 430, 440, 450, 460, 47 0, 480, 490, 520, 560 Chair Height in mm (+/- 10 mm) 890 500, 750, 770, 7 90, 805, 825, 840, 850, 87 0, 890 Chair Dimensions Not Conforming To IS 3663 Latest - Weight of Chair (IN Grams) 3067 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) No Cushion 40, 45, 50, 55, 60, 65, 70, 7 5, No Cushion Density of PU Foam in KG per CuM No Cushion 40, No Cushion GSM/Thickness of Fabric (Gram per Sq Meter) N.A 120gsm, 140gsm, 230gs m, 240gsm, N.A Thickness of Polyurethane Foam Used in Backrest in mm (+/- 2 mm) No cushion 40, No cushion Fabric Material composition used for Cushion Cover N.A - PERFORMANCE Stability of the Chair Conforming To IS 5416 (Part 2) - Strength of the Chair Conforming To IS 5416 (Part 1) - Maximum Ash Content is Not more than 1% in Conformity test as per Annex D of IS: 14887 (Latest) Complied that Ash content is less than 1% - UV Resistance Test - % of Tensile strength retention after 192 hours exposure as per ASTM D2562 -99 Table 1- Cycle Number 2 is more than 50 % Complied Minimum 50% tensile strength retained after exposure as per test - Support/Under Structure Support/Under Structure Sigle Moulded Piece No Support Structure SS 202 STRUCTURE, SS 304 STRUCTURE, Mild Steel Pipe of diameter 25 mm and wall 2/4 thickness 1.1 mm minimum, Sigle Moulded Piece No Support Structure Support Structure Finishing Sigle Moulded Piece No Support Structure Stove enameled Paint, Powder coated, chrome, epoxy polyester, synthetic enamel, Natural Steel Finish, Sigle Moulded Piece No Support Structure CERTIFICATION ISI Marked false - CML No. If ISI Marked na - Test reports to be furnished to buyer on demand NO - MISC Colour Brown, Dark Brown - Colour/Pattern of Fabric for Seat and Backrest Cushions As per Buyer's - WARANTEE PERIOD WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 100 15 EMD Required No ePBG Required No
hand held search light Hand Held Search Light ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Type of lamp LED Halogen, Xenon, LED Battery capacity (AH) 2 - CONSTRUCTIONAL Dia of search light (mm) 50 to 75 50 to 75, 76 to 100, 101 to 125, 126 to 150, 151 to 175, 176 to 200 Wattage of lamp (Watt) 1 1, 3, 5, 10, 15, 20, 30, 35, 5 5 Color temperature (Degree K) 5500 to 6500 deg. K for other lamps 4000 to 4500 deg K for Halegon, 5500 to 6500 deg. K for other lamps Beam angle selection Narrow - Range of Narrow beam angle (Degree) and Range of wide beam angle (Degree) up to 4 deg - Type of front glass Toughened, scratch resistant - One hand operated switch Yes - Built-in battery charger Yes - Type of battery Lithium ion SMF, Lithium ion Battery Voltage (Volts) Volts - Provision of Lanyard Yes - 1/4 strap Rugged, impact and water resistant material of housing Yes - Type of housing material ALUMINIUM ABS, POLYCARBONATE, SUPERTUFF GLASS FILLED NYLON, ALUMINI UM, POLYPROPYLENE Accessories such as Battery charger with cable for External type Charging cable for inbuilt type Yes - Gross weight of Hand Held Search with battery (grams) 1.8 kg (max., ) with Li- ion battery - Warranty for HHSL (in years) 12 Months (SMF Lead acid battery) 6 Months (SMF Lead acid battery), 12 Months (SMF Lead acid battery), 24 Months (SMF Lead acid battery), 12 Months (Li- ion battery) HHSL system with battery shall pass the drop testf rom 1 mtr., height Yes - FUNCTIONAL Light output of search lght (LUX at 100 metres)) 1 Lumen - Effective distance of search light (Metre) >/= 8 metres - Lamp dimming Step type - Continuous search light operation time at maximum lumen output (Hours) FOR LED/XENON ./= 5 HRS FOR HALOGEN >/= 1 HR., FOR LED/XENON >/= 3 HRS, FOR LED XENON ./= 5 HRS, FOR HALOGEN >/= 5 HRS Battery charging time (Hours) 8 - Operating Temperature range (Degree C) -5 degc to +55 deg c - Operating relative humidity range (%) RH 95% at 40 deg.c - Lamp life (Hours) 1000 - CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory Yes - 2/4 to prove conformity to the specification Test report number 108246 - Date of test report 2016 - Name and address of laboratory New Delhi - PROTECTION Protection against reverse polarity Yes - Protection from battery over-discharge Yes - Protection from battery over-charge Yes - Short circuit protection Yes - IP designation for Ingress protection IP 65 - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 15 15 EMD Required No ePBG Required No
cotton towels Cotton Towels ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification IS:7056/1989 Latest BIS specification No- IS:7056/1989 Latest, As per QR/specification for Cotton Terry Towel prepared by Northern India Textile Research Association, Sector 23, Raj Nagar, Ghaziabad, UP and approved by MHA vide letter No. - U- II-25/2011-12- Prov- ( CoBRA ) dated 11-02-2013 CERTIFICATION CM/L No and date 362585 - SIZE Size ( Lenght X Width ) (cm X cm) 60 X 40 60 X 40 CONSTRUCTION WEAVE Construction/Weave TERRY Terry ( as per IS ), Huck- a-Back ( as per IS ), Terry as per MHA approved specification COLOUR Colour SKY BLUE Bleached White, Sky Blue as per MHA approved specification, Any other colour as per buyer's requirements, Striped 1/3 TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab true Name of the Lab bombay dying mfg co ltd - Address of The Lab chandivali, sakivihar road, mumbai - 400072 - Test Report No. A-362585 - Test Report Date 05.05.2017 - Test Report to be furnished to buyer on demand, if claimed to be available Not applicable - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 60 15 EMD Required No ePBG Required No
mattresses or sleep sets mattress kapok jss specification Mattresses Or Sleep Sets Mattress Kapok Jss Specification ( 30 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conforming to specification number Jss :8465-29:2010/Latest - Type of mattress Kapok Mattress kapok MK-2 complete with cover' - Size small - Quilting DONE BY MACHINE - MATERIAL Top Layer long cloth white V.No.1 as per IS:187/Latest - Middle Layer kapok Indian (Small) grade '3' as per IS:3040/Latest - Bottom Layer single texture rubberised waterproof fabrics(white 910 mm both side) as per IS:5915/Latest type 2 quality I grade A - sewing thread sewing cotton 165 d tex X 6 white (balanced) as per IS:1720/Latest - sewing cotton khaki 165 d Tex X 6 Khaki and 100 d tex X 6 khaki conforming to - 1/4 IS:1720:1978(C.No.1) Solution Rubber As per spech IND/TC/2455 or best Trade Quality - Button plastic Diameter 16 mm with matching colour conforming to IS:1461/Latest - DIMENSION & MASS Length of Mattress kapok MK 2 complete with cover or cover Mattress kapok MK 2 Large 2150 Mm For Mattress Kapok MK-2 Large (Complete With Cover) 2150 Mm For Mattress Kapok MK-2 Large (Complete With Cover), 1900 Mm For Mattress Kapok MK-2 Small (Complete With Cover), 2150 Mm For Cover Mattress Kapok MK-2 Large, 1900 Mm For Cover Mattress Kapok MK-2 Small Width of Mattress kapok MK 2 complete with cover or cover Mattress kapok MK 2 Large 900 Mm For Mattress Kapok MK-2 Large (Complete With Cover) 900 Mm For Mattress Kapok MK-2 Large (Complete With Cover), 800 Mm For Mattress Kapok MK-2 Small (Complete With Cover), 900 Mm For Cover Mattress Kapok MK-2 Large, 800 Mm For Cover Mattress Kapok MK-2 Small Mass (Overall) of mattress kapok MK2 complete with cover 2.5 kg ±100gram for large 2.5 kg ±100gram for large, 2.1 kg ±100gram for small Mass of Kapok to be filled in mattress kapok MK2 complete with cover 0.992 Kgs For Mattress Kapok MK-2 (Small Complete With Cover) - Mass of cover Mattress Kapok Mk2 170 gm ±25 gm for small - WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 1, 2, 3, 4, 5 PACKING Packing low density polythene film 0.04 mm spec IS:2508:1984 covered with Textile heavy cee jute cloth as per IS:3751:1993 or Indian Hessian medium double layer conformation to IS:2818(part-2)1971 stitched with country - 2/4 jute twine(3 ply) conforming to IS:1912-1984 or string cond of best trade quality CERTIFICATION Test report to be furnished to the buyer on demand yes - Purchase invoice of Kapok furnished to the buyer on demand YES - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 30 15 EMD Required No ePBG Required No
Desktops
diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 10 10, 10.0 No of Phase - Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - Type of Engine cooling Air Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A2 A0, A1, A2 Number of cylinders (nos) 2 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous 10 - 1/4 running at full load (%) Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 10 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 84.5 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 20 - Density of Foam for sound insulation 20 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory No - Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - 2/4 Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory No - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 1 Installation & Commissioning With Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 1 15 Required No ePBG Required No
Printer
revolving chair Revolving Chair ( 12 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type central tilt As per GeM Catalogue. Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 100 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm, up to 65 mm Arm With With, Without Type of backrest support backrest with lumber support of polypropylene at multilevel across back backrest with lumber support of polypropylene at multilevel across back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Fixed Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type fixed push back, height adjustable Backrest is made of two pcs injection Backrest is made of one piece injection - 1/5 moulded frame moulded frame backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking upright locking - Number of arm movement N.A 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon 2/5 Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material steel covered with polyurethane steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 40 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) NA - Material of Fabric Back Cover Innner frame Upholstered with Mesh fabric and mounted on main assembly mesh fabric, Innner frame Upholstered with Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - 3/5 DIMENSION Overall Chair Height ±15mm 1125 As per GeM Catalogue. Backrest Height ±15mm 570 As per GeM Catalogue. Backrest Width ±10mm 480 410, 440, 480, 500, 520, 5 50, 650, 680, 700, 720 Seat Height ±15 mm 520 420, 450, 520 Seat Width ±10 mm 480 440, 550, 4 60 Seat Depth ±10 mm 500 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 2.2 As per GeM Catalogue. Thickness of Plywood used in Seat ±1(mm) 12 mm 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 650 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 50 mm As per GeM Catalogue. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 2 MM) N.A As per GeM Catalogue. WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO 4/5 Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 12 15 Required No ePBG Required No
Acer Veriton IC6550 I57400, 4GB, 500GB, DVD, W10P, 18.5, 3Y
revolving chair Experience with Gov. Required 1 Year (s) Revolving Chair ( 15 ) Technical Specifications Specification Specification Name Values Allowed Values GENERAL Chair Type push back central tilt, push back, knee tilt synchronic, central tilt synchronic, only revolving without tilting mechanism, 360 Degree swivel, posture control with multilocking position synchronized mechanism, Bio Synchronic, Advance Bio Synchronic, Auto return mechanism, Forward Tilt Mechanism, Forward tilt synchronic mechanism Tilt Tension Adjustment true - Height Adjustment ± 5(mm) up to 90 mm up to 100 mm, up to 120 mm, N.A, up to 90 mm Arm With With, Without Type of backrest support backrest symmetrical lumber support backrest with lumber support of polypropylene at multilevel across 1/6 back, backrest symmetrical lumber support, Backrest With Adjustable Lumber Support Arm Type Adjustable Adjustable, Fixed, NA Colour of Fabric for Seat and Backrest black - Ergonomic Seat Design true Back type push back push back, height adjustable Backrest is made of two pcs injection moulded frame Backrest is made of one piece injection moulded frame - backrest has separate adjustable headrest false Seat type fixed fixed, sliding Seat is curved true - Locking mechanism true - Type of locking 3-Position Locking - Number of arm movement 2(up & down) 2(up & down), 4(up & down end left & right), 6(Up & Down, Left & Right And Swivel), 8(Up & Down, Left & Right, Swivel And Front & Back), N.A Lumber support integrated integrated, external & fixed, external & adjustable, N.A MATERIAL Pedestal Base Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size Glass Fibre Nylon with ABS/NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Electro Coated with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Stainless Steel with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die 2/6 Cast with ABS/Nylon Twin Caster Wheels Minimum 5 Nos, Aluminium Die Cast Chrome Finish With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Nylon Base With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Aluminium Alloy With Nylon Twin Caster Wheels Minimum Of 50-70 Diameter, Wooden Cladded With Nylon Twin Caster Wheels Minimum Of 50-70 Mm Diameter, Chrome finish with 5 wheels Arm Material pu foam bonded chrome coted steel covered with polyurethane, pu foam bonded chrome coted, aluminium covered with pu, CRCA pipe with foam, 19 mm (+/- 2 mm ) ROUND pipe with cushion, 19 mm (+/- 2 mm) round SS pipe with cushion, Pr oypylene, Steel covered with polypropelene, Steel Covered with Wooden Cladding, WITHOUT ARM seat material PU Foam covered with Fabric pressed and moulded plywood with polypropylene cover, PU foam covered with mesh fabric, PU Foam covered with Fabric, PU Foam Covered With pure leather, PU Foam Covered With pure leatherite Density of PU foam used in seat KG per Cu Meter (+/- 3) 45 - Density of PU foam used in backrest in KG per Cu Meter (+/- 3) 45 - Material of Fabric Back Cover 100% polyester fabric mesh fabric, Innner frame Upholstered with 3/6 Mesh fabric and mounted on main assembly, pure leather, 100% polyester fabric, nylon with poly olefin elastomer, Leathe rite, N.A Material of Fabric of Seat Cover 100% polyester fabric foam laminated mesh fabrics, Mesh Fabrics, leatherite, N.A GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram - DIMENSION Overall Chair Height ±15mm 920 670, 710, 760, 810, 860, 8 90, 920, 950, 990, 1025, 1 050, 1080, 1125, 1140, 1 180, 1220, 1250, 1280, 1 310, 1330 Backrest Height ±15mm 460 460, 500, 520, 550, 570, 6 00, 730, 800, 410, 43 0, 650, 690 Backrest Width ±10mm 440 410, 440, 480, 5 50, 680, 700, 720 Seat Height ±15 mm 450 420, 450, 520 Seat Width ±10 mm 480 440, 4 60 Seat Depth ±10 mm 460 400, 460, 420, 540 Thickness of M S Plate Joining the under structure with Seat 0.2 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.2, 1.4, 1.6, 1. 8, 2, 2.2 Thickness of Plywood used in Seat ±1(mm) N.A 12 mm, 15 mm, 18 mm, N.A Thickness of Plywood used in Backrest ± 1(mm) N.A 12 mm, N.A Padestal Size (Diameter in mm) +/- 10 mm 750 - Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm) 45 mm 25 mm, 30 mm, 35 mm, 45 mm, 50 mm, 55 mm, 60, 70, 120 Thickness of Polyurethane Foam Used in Backrest IN 45 mm 25 mm, 120 4/6 MM (+/- 2 MM) WARANTEE Warrantee period in number of years 1-year 1-year, 2-year, 3-year, 4- year, 5-year CERTIFICATION Test reports to be furnished to buyer on demand YES YES, NO BIFMA Certification YES YES, NO OEM of offered product is ISO 9001:2015 certified YES YES, NO OEM of offered product is ISO 14001:2015 certified YES YES, NO OEM of offered product is ISO 18001:2007 certified YES YES, NO Green guard certification YES YES, NO Aiota - YES, NO * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 15 15 EMD Required No ePBG Required No
SONALIKA 10 KVA SINGLE PHASE LIQUID COOLED 1500 RPM WITH MANUAL CONTROl PANEL
125 KVA LIQUID COOLED DIESEL GENERATOR-GENERATING SET, GENSET, DG SET WITH MANUAL CONTROL PANEL
25 kva dg set with manual panel
Printer
Inverter with sine wave output Experience with Gov. Required 1 Year (s) Inverter With Sine Wave Output ( 11 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Inverter Governing specification Generally conforming to IS:13314 - Rating in KVA & Min. VAH Capacity of Battery 1 KVA/4320 VAH 1 KVA/4320 VAH Technology MOSFET-PWM MOSFET-PWM Energy Star Rating 5 Star 3 Star, 4 Star, 5 Star Trolley with trolley with trolley, without trolley Type of Battery Tubular battery confirming to IS:13369 Tubular battery confirming to IS:13369 Backup time (Minutes) Minimum 180 Minutes - CONSTRUCTIONAL Thickness of sheet for trolley (in mm) minimum 1.2 - Trolley Material CRCA Steel - Type of enclosure CRCA Steel - Thickness of sheet for enclosure ( in mm) minimum 1.2 - Inverter shall have by pass facility Yes - 1/3 FUNCTIONAL Total Harmonic distortion </=5% - Input Single Phase sine wave(120 to 260 V) - Output Single Phase sine wave 230 V - Inverter Efficiency (%) >/=87% - Overload Time (in Minutes) >/=10 - Overload of rated load (in %) >/=10 - PROTECTION Battery cut-off voltage to protect from overdischarge (in Volt) >10.5 - Degree of protection IP 21 - METERING AND INDICATIONS The inverters shall be provided with output voltage and current meters conforming to IS 2419 : 1979 and of an accuracy class not inferior to 2.5 in accordance with IS 1248 : 1983 Yes - CERTIFICATIONS Availability of the Type Test Report from Central Govt. NABL/ILAC Accredited lab Yes - Climatic test report as per clause 7.10.1 of IS 13314 yes - Type Test Certificate No. R-96000108 - Name of Lab DELHI - Type Test Certificate date SEPTEMBER 2017 - Address of Lab DELHI - Inverter shall have valid BIS CRS certifications for </= 10 KVA Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 2/3 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 11 15 EMD Required No ePBG Required No
Desktops
bed sheets or spreads Bed Sheets Or Spreads ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Conforming to Indian Standard IS 175: 1989: Latest - Variety No as per BIS specification; Fibre content and Mass Variety No-4; 100 % cotton; 145 gms per sq.m Variety No-2; 100 % cotton; 170 gms per sq.m, Variety No-4; 100 % cotton; 145 gms per sq.m, Variety No-5; 48 % polyester & 52 % cotton; 155 gms per sq. m SIZE Length 215.0 215, 230, 240, 255, 275, 1 30 Width 230.0 135, 150, 175, 9 1 OTHER REQUIREMENTS Colour/Print Printed Printed Weave Plain - PILLOW COVER Matching pillow cover Included 2 number for double bed sheet Included 1 number for single bed sheet, Included 2 number for double bed sheet, Not included Size of pillow cover 50cm X 36cm 63cm X 45cm, 50cm X 36cm, Not Applicable, if pillow cover is not included 1/3 TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes Yes, No Name of the Lab NA - Address of The Lab NA - Test Report No. NA - Test Report Date NA - Test Report to be furnished to buyer on demand, if claimed to be available Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 60 15 EMD Required No ePBG Required No
Ceiling Fan
cotton towels Cotton Towels ( 60 ) Technical Specifications Specification Specification Name Values Allowed Values SPECIFICATION Governing Specification IS:7056/1989 Latest BIS specification No- IS:7056/1989 Latest, As per QR/specification for Cotton Terry Towel prepared by Northern India Textile Research Association, Sector 23, Raj Nagar, Ghaziabad, UP and approved by MHA vide letter No. - U- II-25/2011-12- Prov- ( CoBRA ) dated 11-02-2013 CERTIFICATION CM/L No and date NA - SIZE Size ( Lenght X Width ) (cm X cm) 150 X 75 150 X 75 CONSTRUCTION WEAVE Construction/Weave TERRY Terry ( as per IS ), Huck- a-Back ( as per IS ), Terry as per MHA approved specification COLOUR Colour BLEACHED WHITE Bleached White, Sky Blue as per MHA approved specification TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government true 1/3 Lab Name of the Lab NABL - Address of The Lab Mumbai - Test Report No. 5896 - Test Report Date 13.12.2017 - Test Report to be furnished to buyer on demand, if claimed to be available Not applicable - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 60 15 EMD Required No ePBG Required No
Televisions
diesel generators- DG Sets Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 25 25 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine false - BIS license No, if applicable - - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 3 - No of Strokes (nos) 4 - Rated RPM of Engine (RPM) - 1500, 3000 1/4 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 25 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 76.73 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel AMF Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 25 - Density of Foam for sound insulation 28 - Noise level at 1 meter (dB) 74 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - Test Report number - - 2/4 and date(Engine) Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 1 15 EMD Required No ePBG Required No
diesel generators- DG Sets Experience with Gov. Required 1 Year (s) Diesel Generators- DG Sets ( 2 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 10 10, 10.0 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - BIS license No, if applicable - - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 2 - No of Strokes (nos) 4 - Rated RPM of Engine - 1500, 3000 1/4 (RPM) Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 12 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 10 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 84.5 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 25 - Density of Foam for sound insulation 26 - Noise level at 1 meter (dB) 75 - BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance - Battery capacity (Ah) - - No of batteries 1 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - 2/4 Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 2 15 EMD Required No ePBG Required No
chairs-office
diesel generators- DG Sets Experience with Gov. Required 1 Year (s) Diesel Generators- DG Sets ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 125 125, 125.0 No of Phase - Single phase, Three Phase ENGINE Make of Engine - - Model Number of Engine - - Capacity of Engine (cc) - - Engine Power (kWm) - - ISI Marking to IS :10001 for engine true - BIS license No, if applicable - - Type of Engine cooling Liquid Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic Class of governer A1 A0, A1, A2 Number of cylinders (nos) 6 - No of Strokes (nos) 4 - Rated RPM of Engine - 1500, 3000 1/4 (RPM) Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 - Specific Fuel Consumption (gm/kWh) - - Starting voltage (volt) 24 - ALTERNATOR AC GENERATOR(ALTER NATOR) Make - - AC GENERATOR(ALTER NATOR) model Number - - Rating of AC Generator (KVA) 125 - Power Factor of AC generator 0.8 - Efficiency at rated Power factor at 75% of full Load 92.8 - Compliance of Alternator to IS:13364(part-1) Yes - Type of alternator Brushless - Voltage Regulation Grade VG 3 - Alternator IP Rating IP 23 - Class of Insulation H - CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 53 - ACOUSTIC ENCLOSURE Sheet Thickness 1.6 1.6, 1.8, 2, 1.2 Thickness of Foam 50 - Density of Foam for sound insulation 28 - Noise level at 1 meter (dB) 74 - BATTERY Battery Type & Specification Normal lead acid to IS: 7372 for motor vehicles - Battery capacity (Ah) - - No of batteries 2 - TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes - 2/4 Test Report number and date(Engine) - - Name and address of laboratory(Engine) - - Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes - Test Report number and date(Alternator) - - Name and address of laboratory(Alternator) - - DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes - WARRANTY INSTALLATION & COMMISSIONING Warranty 2 Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Kuda Druva Kumar 531024, Project Officer Integrated Tribal Development Agency Paderu, Visakhapatnam District 1 15 EMD Required No ePBG Required No
Printer
Desktops
50MM PE100 HDPE PIPE PN8