Principal Controller of Defence Accounts (Border Roads) Tender Results

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint ( PAC Only ) Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 5 Year (s)

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint ( PAC Only ) Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 5 Year (s)

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint ( PAC Only ) Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 5 Year (s)

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint ( PAC Only ) Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 5 Year (s)

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint ( PAC Only ) Average Turn Over of Last 3 Years 2 Lakh (s) Experience with Gov. Required 5 Year (s)

lead acid battery ( PAC Only )

sofas

Washable Distemper ( PAC Only ) Average Turn Over of Last 3 Years 3 Lakh (s)

Air Hoses ( PAC Only ) Average Turn Over of Last 3 Years 50 Lakh (s) Experience with Gov. Required 5 Year (s)

Printer or photo Copier Paper

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint ( PAC Only ) Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 5 Year (s)

Printer or photo Copier Paper ( PAC Only ) Average Turn Over of Last 3 Years 6 Lakh (s) Experience with Gov. Required 6 Year (s)

kerosene oil fired bhukhari with exhaust pipe

Automotive Vehicles- Retro- Reflective Sheets and Tapes(Traffic Safety) ( PAC Only ) Average Turn Over of Last 3 Years 13 Lakh (s) Experience with Gov. Required 5 Year (s)

UNPLASTICIZED POLYVINYL CHLORIDE(PVC) SCREEN AND CASING PIPES FOR BORE/TUBEWELLS

Automotive Vehicles- Retro- Reflective Sheets and Tapes(Traffic Safety) Average Turn Over of Last 3 Years 12 Lakh (s) Experience with Gov. Required 5 Year (s)

guardrail for highways Average Turn Over of Last 3 Years 345 Lakh (s) Experience with Gov. Required 5 Year (s)

Automotive Vehicles- Retro- Reflective Sheets and Tapes(Traffic Safety) Average Turn Over of Last 3 Years 12 Lakh (s) Experience with Gov. Required 5 Year (s)

lead acid battery

diesel generators- DG Sets

hdpe tarpaulins in square mtrs

anti set off spray powder

waste containers or rigid liners- Dust bin or Garbage Bin or Household Bin

galvanized steel sheets

galvanized steel chain link fence fabric Average Turn Over of Last 3 Years 50 Lakh (s)

Printer or photo Copier Paper

Mobile Toilet

kerosene oil fired bhukhari with exhaust pipe

METAL BEDS

galvanized steel sheets

revolving chair

Stanchion Barriers

kerosene oil fired bhukhari with exhaust pipe

Televisions

Televisions

Multimedia Projectors

Ceramic Tiles ( PAC Only ) Average Turn Over of Last 3 Years 4 Lakh (s) Experience with Gov. Required 3 Year (s)

Ceramic Tiles ( PAC Only ) Average Turn Over of Last 3 Years 3 Lakh (s) Experience with Gov. Required 3 Year (s)

kerosene oil fired bhukhari with exhaust pipe

water storage tanks

Linoleum Sheet and Tiles MSME Exemption For Years Of Experience And Turnover No Linoleum Sheet And Tiles ( 538 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERAL Items Linoleum sheet Linoleum sheet, Linoleum Tile, Cork Tiles Type of Linoleum Plain Linoleum Plain Linoleum, Moire Linoleum, Jaspe Linoleum, Marble Linoleum, NA SPECIFICATION Conformity to Indian standard IS 653-Latest true * Product is BIS marked false true, false CM/L No(If Product is ISI Marked) 0 * MATERIAL Wearing Surface Material of Linoleum Mineral fillers * Hessian backing false * painted Hessian false * 1/3 backing SHAPE Shape of Tile NA * DIMENSION Length of Sheet rolls(meter) 10 * Width of Sheet rolls (meter) 2 2, NA Size of Linoleum tiles (mm)x(mm) NA 225x225 square, 300x300 square, 450x450 square, NA Overall Thickness of sheet/Tile (mm) 1.65 1.65, 2, 2.5, 3.2, 4.5, 1.0 TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification false * Test report no 0 * Test Report Date 0 * Name of Lab 0 * Address of lab false * Test reports to be furnished to buyer on demand false * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 538 15

almirah- Steel MSME Exemption For Years Of Experience And Turnover No Almirah- Steel ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest false * No of shelves (Nos) N.A * Type of Shelves Adjustable * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors false * Number of Hinges with each door (Nos) 3 * Number of Glass Sheet N.A * 1/4 fixed in each Almirah door (Nos) Construction Welded * Lock Three Way bolting device controlled by lock * MATERIAL Material M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker N.A * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 1.0 mm * Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) * Sheet Thickness of Shelves 0.8 mm * Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) * Material of Lock steel * Material of Keys steel * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1155 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 2/4 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) N.A * Thickness of MS Sheet of Stiffner (in mm) N.A * Stiffened Pedestal height in mm (±2 mm) 120 * Pedestal Width in mm (±2 mm) 70 * COLOUR & FINISH Finish powder coated * Colour of Paint off white * Packing: Bubble Sheet * CERTIFICATION ISI marked false * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 2 15

almirah- Steel MSME Exemption For Years Of Experience And Turnover No Almirah- Steel ( 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:3312 latest true * No of shelves (Nos) 5 * Type of Shelves Adjustable * Locker Provided false * Locking System with the locker NA * Cloth hanging provision in the Almirah false * Number of Doors (Nos) 2 * Door Stiffner upto full door height Provided with the almirah doors true * Number of Hinges with each door (Nos) 3 * Number of Glass Sheet N.A * 1/4 fixed in each Almirah door (Nos) Construction Welded * Lock Three Way bolting device controlled by 6 lever lock * MATERIAL Material M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1 M.S sheet conforming to commercial quality CR- 1, Grade 340 of IS 513:2008 (reaffirmed 2013)(Fifth Revision)Amdt. no.1, M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 (Not as per IS 3312) Material of Almirah Doors M S Sheet M S Sheet, 5 mm thick Transparent Glass Sheet fixed in the MS sheet frame, 3mm thick polycarbonate sheet fixed in the ms sheet frame, perforated MS sheet Sheet Thickness of Locker 0.8 mm * Length of Glass Sheet ±10 (mm) N.A * Width of Glass Sheet ±10 (mm) N.A * Sheet Thickness of door in mm 0.8 mm (Minimum) * Sheet Thickness of sides, back, Top and Bottom 0.8 mm (Minimum) * Sheet Thickness of Shelves 0.8 mm * Sheet Thickness of Pedestal in mm 0.8 mm (Minimum) * Material of Lock Brass and steel finish * Material of Keys brass and steel finish * DIMENSION Height (Without Pedestal) (in mm) (+/- 10 mm) 1855 1000, 1155, 1855, 1800, 2000, 850, 1050, 1325, 1450 Width in mm (± 7 mm) 910 760, 910, 1023, 700 Depth in mm (±5 mm) 480 430, 455, 480, 486, 270, 370, 400 2/4 Inside Height of Locker in mm (± 5 mm) N.A * Inside Width of Locker i mm (±5 mm) N.A * Inside Depth of Locker in mm (±5 mm) N.A * Width of Stiffner in mm (±5 mm) N.A * Thickness of MS Sheet of Stiffner (in mm) N.A * Stiffened Pedestal height in mm (±2 mm) 120 * Pedestal Width in mm (±2 mm) 75 * COLOUR & FINISH Finish powder coated * Colour of Paint off white * Packing: Corrogeted Paper Packing * CERTIFICATION ISI marked false * WARRANTY WARANTEE PERIOD IN NUMBER OF YEARS 1 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 2 15

diesel generators- DG Sets MSME Exemption For Years Of Experience And Turnover Yes Diesel Generators- DG Sets ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values OUTPUT CAPACITY RATING/PHASE Nominal Rated Capacity (KVA) 5 * (or higher) No of Phase - Single phase, Three Phase ENGINE Make of Engine - * Model Number of Engine - * Capacity of Engine (cc) - * Engine Power (kWm) - * ISI Marking to IS :10001 for engine true * BIS license No, if applicable - * Type of Engine cooling Air Cooled Air Cooled, Liquid Cooled Type of governer Mechanical Mechanical, Electronic 1/4 (or higher) Class of governer A2 A0, A1, A2 (or higher) Number of cylinders (nos) 1 * No of Strokes (nos) 4 * Rated RPM of Engine (RPM) - 1500, 3000 Overload capacity for one hour for every 11 hours continuous running at full load (%) 10 * Specific Fuel Consumption (gm/kWh) - * Starting voltage (volt) 12 * ALTERNATOR AC GENERATOR(ALTER NATOR) Make - * AC GENERATOR(ALTER NATOR) model Number - * Rating of AC Generator (KVA) 5 * Power Factor of AC generator 0.8 * Efficiency at rated Power factor at 75% of full Load 85 * Compliance of Alternator to IS:13364(part-1) Yes * Type of alternator Brushless * Voltage Regulation Grade VG 2 * Alternator IP Rating IP 23 * Class of Insulation H * CONTROL PANEL Control Panel Manual Manual, AMF IP Rating of Control Panel IP 53 * ACOUSTIC ENCLOSURE Sheet Thickness 1.2 1.6, 1.8, 2, 1.2 (or higher) Thickness of Foam 40 * Density of Foam for sound insulation 32 * Noise level at 1 meter (dB) 75 * 2/4 BATTERY Battery Type & Specification Low Maintenance free to IS: 14257 for high cranking performance * Battery capacity (Ah) - * No of batteries 1 * TEST REPORTS Availability of Type test report for Engine from Central govt/NABL/ILAC accredited laboratory Yes * Test Report number and date(Engine) - * Name and address of laboratory(Engine) - * Availability of Type test report for Alternator from Central government/NABL/ILAC accredited laboratory Yes * Test Report number and date(Alternator) - * Name and address of laboratory(Alternator) - * DG set meet requirements of Enviro nmental(Protection) Rules 1986, in respect of noise and emission norms, as described in STC Yes * WARRANTY INSTALLATION & COMMISSIONING Warranty 1 Any applicable numeric value Installation & Commissioning Without Installation With Installation, Without Installation Agreed to STC of the Product Yes * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Kumar Agarwal 192212, HQ 760 BRTF, Verinag 3 15

galvanized steel sheets MSME Exemption For Years Of Experience And Turnover No Galvanized Steel Sheets ( 355 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:277:2003 With Latest Amdmnt. * Type of Sheet Corrugated Plain, Corrugated Grade of Sheets Metal Corrugated Ordinary(O) Deep Drawing(DD), Extra Deep Drawing(EDD), Corrugated Ordinary(O), Ordinary(O), Ordinary Hard(O), Lock Forming(D), Interstitial Free(IF) CONSTRUCTIONAL Grade of Zinc Coating 120 120, 180, 200, 220, 275, 350, 450, 600 (or higher) Length of sheet (mm) 2500 1800, 2200, 2500, 2800, 3000, 3050 Thickness of sheet(uncoated) 0.63 * (or higher) 1/3 (mm) Width of Plain sheet (mm) 900mm 750mm, 900mm, 1000mm, 1200mm, NA for Corrugated Sheets Grade of Corrugated Sheet B * Number of Corrugation (Nos) 10 * Width of Corrugated Sheets (mm) 841 * Depth of Corrugated Sheet (mm) 12.5 * Pitch of Corrugated Sheet (mm) 70 * CERTIFICATION BIS Marking Yes * CM/L No - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 355 15

galvanized steel sheets MSME Exemption For Years Of Experience And Turnover No Galvanized Steel Sheets ( 101 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Indian Standard IS:277:2003 With Latest Amdmnt. * Type of Sheet Plain Plain, Corrugated Grade of Sheets Metal Ordinary(O) Deep Drawing(DD), Extra Deep Drawing(EDD), Corrugated Ordinary(O), Ordinary(O), Ordinary Hard(O), Lock Forming(D), Interstitial Free(IF) CONSTRUCTIONAL Grade of Zinc Coating 120 120, 180, 200, 220, 275, 350, 450, 600 (or higher) Length of sheet (mm) 3000 1800, 2200, 2500, 2800, 3000, 3050 Thickness of sheet(uncoated) 0.63 * (or higher) 1/3 (mm) Width of Plain sheet (mm) 1200mm 750mm, 900mm, 1000mm, 1200mm, NA for Corrugated Sheets Grade of Corrugated Sheet NA for Plain Sheet * Number of Corrugation (Nos) NA for Plain Sheet * Width of Corrugated Sheets (mm) NA * Depth of Corrugated Sheet (mm) NA for Plain Sheet * Pitch of Corrugated Sheet (mm) NA for Plain Sheet * CERTIFICATION BIS Marking Yes * CM/L No - * Availability of Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 101 15

plywood

gate valve MSME Exemption For Years Of Experience And Turnover Yes Gate Valve ( 3 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SIZE/TYPE DIMENSIONAL MATERIAL Classification Class 1 Valves Class 1 Valves, Class 2 Valves Nominal Size of Valve 80 80.0 Type of Gate Valve Solid Wedge Solid Wedge, Split Wedge, Double Disk Type of Valves End Screwed End Valve Screwed End Valve, Flanged Valve Type of Bonnet Screwed-in Bonnet Screwed-in Bonnet, Screwed-on Bonnet, Bonnet Flanges, Bonnet Bolting Material of Bonnet or Cover Leaded Tin Bronze Leaded Tin Bronze, Forged Brass, Brass Material of Body Leaded Tin Bronze Brass, Leaded Tin Bronze Material of Stem, Hinge Extruded Brass Rod * 1/3 Pin and Plug Word 'OPEN' or 'SHUT' with arrow to indicate Direction On Handwheel * Weight 5.7 * CONFORMITY CERTIFICATION Conformity to Indian Standard IS 778 : latest * ISI Marking true true CML No. - * Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 3 30

gate valve MSME Exemption For Years Of Experience And Turnover Yes Gate Valve ( 9 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values SIZE/TYPE DIMENSIONAL MATERIAL Classification Class 1 Valves Class 1 Valves, Class 2 Valves Nominal Size of Valve 50 50.0 Type of Gate Valve Solid Wedge Solid Wedge, Split Wedge, Double Disk Type of Valves End Screwed End Valve Screwed End Valve, Flanged Valve Type of Bonnet Screwed-in Bonnet Screwed-in Bonnet, Screwed-on Bonnet, Bonnet Flanges, Bonnet Bolting Material of Bonnet or Cover Leaded Tin Bronze Leaded Tin Bronze, Forged Brass, Brass Material of Body Brass Brass, Leaded Tin Bronze Material of Stem, Hinge Extruded Brass Rod * 1/3 Pin and Plug Word 'OPEN' or 'SHUT' with arrow to indicate Direction On Handwheel * Weight 2.5 * CONFORMITY CERTIFICATION Conformity to Indian Standard IS 778 : latest * ISI Marking true true Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification true * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 9 30

power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater, power cord-Flexible electric cable Heating cables or Wire cotton Power for Heater MSME Exemption For Years Of Experience And Turnover Yes Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 1350 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable, IS:9968 (Pt-1&2) for elastomer insulated cable BIS Marked Yes * CM/L No 8158075 * CONSTRUCTIONAL Working voltage Upto 1100V * Type of insulation PVC PVC, Elastomer Type of sheath PVC PVC, Elastomer Sheated No Yes, No Outer cover material Non braided Non braided, Braided 1/4 No. of cores 2 2, 3 Conductor material Copper * Size of the conductor 2.5 * Type of conductor Stranded * Type of service General * Type of flexible cord Unkinkable * Length of cable in a bundle (meter) 90 * Cable bundle weight (kgs) 8 * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes * Test report number 20/16/BT/NISE * Test Report Date 19/12/16 * Name of Lab NISE * Address of the lab Village & Post-Gwalpah ari, Dist.Haryana * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 1350 30 Power Cord-Flexible Electric Cable Heating Cables Or Wire Cotton Power For Heater ( 2430 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformation of cable to IS: 694 for PVC insulated cable IS: 694 for PVC insulated cable, IS:9968 (Pt-1&2) for elastomer insulated cable BIS Marked Yes * 2/4 CM/L No 7380172 * CONSTRUCTIONAL Working voltage Upto 1100V * Type of insulation PVC PVC, Elastomer Sheated Yes Yes, Braided No. of cores 2 2, 3 Conductor material Copper * Size of the conductor 1.5 Sqmm * Type of conductor Stranded * Type of service General * Type of flexible cord Unkinkable * Length of cable in a bundle (meter) 90 * Cable bundle weight (kgs) 1.8 * CERTIFICATIONS Availability of Type test report from Central government/NABL/ILAC accridiated laboratory to prove conformity to the specification Yes * Test report number T-1616 * Test Report Date 18/06/2015 * Name of Lab NABL * Address of the lab SP-919, 920, 922, RIICO Industrial Area, Bhiwadi Rajashthan * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 2430 30