Principal Controller of Defence Accounts (Border Tender Results

lead acid battery

office suite software - MS Office etc

Almirah Steel

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint

automotive vehicles pneumatic tyres

automotive vehicles pneumatic tyres

Almirah Steel

Prefab Shelters With PUF Panel of Size 7.620 M x 13.271 M (As Per GeM Drawing)

lead acid battery

Desktop Computers

office suite software - MS Office etc

tents tent extendable frame supported complete with accessories

bib taps and stop valves cast copper alloy

Welding rod for Low and medium alloy steel

wheelbarrows

automotive vehicles pneumatic tyres

Shovel Belcha, Pick Axe, SPADE

automotive vehicles pneumatic tyres

urn sand bags-HDPE AND PP SAND BAG

urn sand bags-HDPE AND PP SAND BAG

Single/Double Bed - Wooden - With/Without Box

urn sand bags-HDPE AND PP SAND BAG

urn sand bags-HDPE AND PP SAND BAG

automotive vehicles pneumatic tyres

Enamel, Synthetic, Exterior: (a) Under coating (b) Finishing paint

Thinner, general purpose, for synthetic paints and varnishes

lead acid battery

STEEL BODY EVAPORATIVE COOLERS- DESERT COOLER

lead acid battery, lead acid battery Average Turn Over of Last 3 Years 15 Lakh (s)

Portable Toilet

hammers, hammers Hammers ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Performance Parameters Conformity to Indian Standard IS 841:1983 With Latest Amdmnt. IS 841:1983 With Latest Amdmnt. BIS Marking false true, false CM/L No (If BIS marked, otherwise indicate NA) - * Nominal Mass (Grams) 800 * Type of Hammers double face sledge hammer * Dimensional and Material Parameters Grade of Material (Steel) T65 T50, T55, T65, T70 Handles Requirement Yes Yes, No Material of Handles Wood Wood, Polymer, N/A Name of the wood Timber - * Length Of the Handles (in mm) 1 * 1/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 200 15 Hammers ( 200 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Performance Parameters Conformity to Indian Standard IS 841:1983 With Latest Amdmnt. IS 841:1983 With Latest Amdmnt. BIS Marking false true, otherwise indicate NA) - * Nominal Mass (Grams) 800 * Type of Hammers cross pein hammer * Dimensional and Material Parameters Grade of Material (Steel) T50 T50, N/A Name of the wood Timber - * Length Of the Handles (in mm) 250 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, ASSAM 200 15

hammers, hammers Hammers ( 45 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Performance Parameters Conformity to Indian Standard IS 841:1983 With Latest Amdmnt. IS 841:1983 With Latest Amdmnt. BIS Marking false true, false CM/L No (If BIS marked, otherwise indicate NA) - * Nominal Mass (Grams) 5500 * Type of Hammers double face sledge hammer * Dimensional and Material Parameters Grade of Material (Steel) T50 T50, T55, T65, T70 Handles Requirement Yes Yes, No Material of Handles Wood Wood, Polymer, N/A Name of the wood Timber - * Length Of the Handles (in mm) 600 * 1/3 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, 510 SS&TC (GREF) NAGATILLA, CACHAR, SILCHAR, ASSAM 45 15 Hammers ( 60 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values Performance Parameters Conformity to Indian Standard IS 841:1983 With Latest Amdmnt. IS 841:1983 With Latest Amdmnt. BIS Marking false true, otherwise indicate NA) - * Nominal Mass (Grams) 4500 * Type of Hammers double face sledge hammer * Dimensional and Material Parameters Grade of Material (Steel) T50 T50, N/A Name of the wood Timber - * Length Of the Handles (in mm) 300 * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Vikas Dimri 788001, ASSAM 60 15 2/3

hammers

Average Turn Over of Last 3 Years 10 Lakh (s) Experience with Gov. Required 1 Year (s) Prefab Hut/House Of Size 6.10 M X 19.52 M - As Per GeM Drawing ( 1 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Prefab HUT/House With Verandah Conforming to GeM DRG. NO.118 (VERSION-2015) Without Verandah Conforming to GeM DRG. NO.112 (VERSION-2015), With Verandah Conforming to GeM DRG. NO.118 (VERSION-2015) Type of Roof of Prefab HUT/House Roof of corrugated prepainted galvanised steel sheet Roof of corrugated galvanised steel sheet, Roof of corrugated prepainted galvanised steel sheet Pre-fabricated Huts shall be manufactured by using Double skin insulated flat cement sheet board (asbestos fibre) panels for wall and CGI sheet roof Double skin insulated flat cement sheet board (asbestos fibre) panels for wall and CGI sheet roof Pre-fabricated huts 2 doors - 8 windows - 7 * 1/10 having fabricated steel trusses and without false ceiling. Scope of supply (Offer Price to include all cost components) Supply, Installation, Testing and Commissioning of Hut/House Supply, Testing and Commissioning of Hut/House Transpotations Freight charges Offer Prices are on Free Delivery at Consignee site basis. Offer Prices are on Free Delivery at Consignee site basis. Approval of Advance sample before Bulk Supply No Advance Sample After award of contract, Seller shall have to get Advance sample approved from Buyer before manufacturing starting Bulk supplies. Buyer shall approve provide list of modifications required within 10 days of offer of advance sample. If there is delay in approval of advance sample from Buyer side, the delivery period shall be regularized for the period of delay in sample approval., No Advance Sample Foundation for Prefab Hut Building of Foundation at site shall be the responsibility of the Consignee and the Seller shall Install Erect and Commission the structure on the foundation constructed upto plinth level by the Consignee. Building of Foundation at site shall be the responsibility of the Consignee and the Seller shall Install Erect and Commission the structure on the foundation constructed upto plinth level by the Consignee. Time Period for Completion of Erection work at site by Seller Within 60 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work Within 45 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work, Within 60 days of the date of receipt of consignee's confirmation regarding completion of ground and foundation work Payment Terms Bill/invoice to be submitted in two parts Bill/invoice to be submitted in two parts 2/10 by seller (80% and 20%). Payment for initial 80% to be made within ten (10) days of receipt of goods by consignee. Bill for balance 20% to be raised by seller after completion of installation commissioning, and to be released by Buyer with in ten (10) days of issue of consignee receipt-cum- acceptance certificate after Successful installation Commissioning by seller (80% and 20%). Payment for initial 80% to be made within ten (10) days of receipt of goods by consignee. Bill for balance 20% to be raised by seller after completion of installation commissioning, and to be released by Buyer with in ten (10) days of issue of consignee receipt-cum- acceptance certificate after Successful installation Commissioning Suitability structural stability completness of structures, the structure is intended for use in In wind condition of 55m/s, in Seismic zone V and ambient temperature of 0 degree C to 50 degree C. Huts should be structurally stable and suitable to meet severity of these climatic condition. In wind condition of 55m/s, in Seismic zone V and ambient temperature of 0 degree C to 50 degree C. Huts should be structurally stable and suitable to meet severity of these climatic condition. Type of glass fitted on windows/Ventilators Plain Pin head type, Plain DESIGN/MATERIAL OF WALL PANELS Design of wall panel As per GeM DRG. NO.121 & 123(VERSION-2015) * Wall made in sandwich panel system using 2 Numbers 10 mm thick cement flat sheets/boards (Asbestos free) as skins conforming to IS 14276 Latest as amended uptodate IS 14276 Latest as amended uptodate, Category 3 Type B of IS 14862:2000 latest as amended up to date Sandwich material - 27 mm gap in between wall skins to be filled with 27mm thick expanded polystyrene core having bulk density of 15 Kg/Cum conforming to IS 4671:1984 type I (Latest) * Panel Strengthened On all four sides By 'W' shaped pre- profiled steel section made from 0.63 GI steel sheet/coil * 3/10 Cement sheet and expanded polystyrene core to be bonded together using bonding material PVA (polyvinyl acetate) based conforming to IS 4835/Latest, uniformly & fully applied on both sides of the expanded polystyrene cores to ensure proper bonding of the panels. No patching of adhesive will be accepted * 'U' shaped ground track size (panels to be inserted one by one) 52.5mm X 35mm X 1.25mm made from GI steel sheet/coil * Bottom track to be fixed To the concrete platform at plinth level by suitable fastners screwed into PVC expandable Screw cap * Interlocking of wall panel(lengthwise) using cold-formed rectangular hollow steel section of size 50mm X 25mm X 1.25mm * Wall corners to be concealed With corner angle of 125mm X 125mm X 1.25mm made from GI steel sheet/Coil * Top of walls to be concealed With 'U' shaped top track of size 52.5mm X 35mm X 1.25mm made from GI steel sheet coil * Sellers are free to adopt higher sizes/reinforcement For better fitment or mating of components or for improved stability * ROOF & ROOF FRAME WORK Design of roof As per GeM DRG. NO.119(VERSION-2015) * Wall height at eaves and central gable 2750mm at eaves and 3360mm at central gable * Roof to be done with Corrugated prepainted galvanised steel sheets and prepainted galvanised steel sheet ridge cover with thickness of BMT 0.63mm conforming to IS 14246/Latest. Top coat of sheet shall be PVDE/Sillicon modified Polyester having Galvanised corrugated sheets of 0.63mm thickness conforming to IS 277/Latest having min. 275gsm galvanising, Corrugated prepainted galvanised steel sheets and prepainted galvanised steel sheet ridge cover with 4/10 thickness of 20 micron (Min) and Back coat shall be of Alkaloid epoxy or polyester having thickness of 7 micron(Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for transport. The durability of paint coating shall correspond to class 1 as per table -1 of IS :14246:2013. (Colour shade of exterior finish shall be Olive Green of colour code RAL6028.The Seller shall furnish manufacture's test certificate indicating material of coating and suitablity of exterior application. thickness of BMT 0.63mm conforming to IS 14246/Latest. Top coat of sheet shall be PVDE/Sillicon modified Polyester having thickness of 20 micron (Min) and Back coat shall be of Alkaloid epoxy or polyester having thickness of 7 micron(Min). A protection sheet (Polyethylene) shall also be provided on top coat of the sheet for transport. The durability of paint coating shall correspond to class 1 as per table -1 of IS :14246:2013. (Colour shade of exterior finish shall be Olive Green of colour code RAL6028.The Seller shall furnish manufacture's test certificate indicating material of coating and suitablity of exterior application. Roof to be laid over Frame work of trusses - columns and purlins fixed using suitable fasteners like 'J' hooks with bitumen washers and nuts/bolts. * Size of Ridge cover to be fixed on top junction of roof of same materail as Roof 225 X 225 X 0.63 mm * Roof slope 1:4(approx) * Purlin to be provided on the roof Of size 66 X 33 X 2.9mm at the eaves and at gable roof extension(out side the structure) * Roof projection in case of no verandah(in front) Min. 400mm from the eaves wall and 300mm from gable walls * Roof projection As per GeM DRG. NO.109 & 119(VERSION-2015) * 5/10 Purlin provided on the trusses At a max. pitch of 1000 mm or less and are fixed and flushed with the top level of trusses with the help of 5mm thick MS end plates and 10mm nuts/bolts * Column to be welded With 5mm thick MS end plate and to be fixed to the foundation bolts through this plate * Trusses/purlins to be fixed Using 5mm thick MS end plates and 10 mm nuts and bolts * Trusses (supported on truss column) provided at a distance of 2440 mm * Trusses and Purlin to be made of Rectangular hollow sections of size 66 X 33 X 2.9 mm conforming to IS 4923/Latest duly ISI marked * Truss columns to be made of Rectangular hollow steel sections of size 96 X 48 X 3.2mm conforming to IS 4923/Latest duly ISI marked * Roof structural frame work As per GeM DRG. NO.119-120a-120b & 121(VERSION-2015) * VERANDAH & DOORS Width of verandah 1525 mm 1525 mm, No verandah Clear height of verandah 2280 mm * Verandah roof to be made of GI (continuous provided along the roof of the structure) * Purlin provided to verandah structure To be made of rectangular hollow steel sections of size 66x33x2.9mm and are fixed and flushed with the top level of the truss extension member with the help of 5mm thick MS end plates and 10mm nut/bolts. * Verandah columns to be made of rectangular hollow steel sections of size * 6/10 66x33x2.9mm fixed with help of 5mm thick MS end plates and 10mm nuts/bolts at top level and at leveled base by using 5mm thick MS end plates and 4nos. 12mm dia-305mm long foundation bolts. Door frame to be made from Pressed steel four sided frame using CR steel of size 75x45x1.5mm thickness confmg. to IS 513/latest * Door Hinges 4nos. 100mm MS hinges welded on to the frame * Door shutter made of 30 mm thick flush door confmg. to IS 2202(part-1)/latest * Door shutter to be fixed with Door frame with 4nos. MS oxidized hinges of 100mm length * Door aldrops To be provided 2nos. MS oxidized of 300mm length * Door tower bolts MS oxidized of size 200mm at top and 100mm at bottom on each shutter * Door handles 2nos. 150mm long handles * WINDOWS & VENTILATORS Windows As per GeM DRG. NO.125(VERSION-2015) * Ventilators As per GeM DRG. NO.126(VERSION-2015) * Frame material of windows/ventilators Made from pressed steel using CR steel of size 75 X 45 X 1.5mm (thickness) conforming to IS 513/Latest * Hinges for windows 6 Nos. 75mm MS butt hinges welded on to the frame * Hinges for ventilators 2 Nos. 75mm MS butt hinges welded on to the frame * Grills for Windows/Ventilators Made from MS square bar of 8mm having * 7/10 equal spacing of 125mm Shutter material for windows/ventilators Fabricated type Made out of steel rectangular hollow box profile of 1.25mm thick as per drawing, Fabricated type Each window shutter consist of MS oxidized handle of 150mm - 2 Nos. MS oxidized tower bulls of 100mm and 1 No. window stay. * Each ventilator shutter(Internal) consist of 1 No. stay hook * Glass sheet for windows/ventilators Of 4mm thickness to be fixed using glass putty * ELECTRICAL WIRING & FITMENTS Electrical points/sockets/fan regulators/gang way boxes To be provided ISI mark as per table in annexure B * Main switch board Comprising of SP/DP MCBs to be supplied in addition * cables and PVC conduit Adequate quantity to be provided * Electrical installation/co mpleteness Seller is fully responsible for wiring etc. (except light fittings) * Fan regulator Conforming to IS 11037/Latest * COLOUR & FINISH Corrugated GI sheets and ridge cover Confmg. to IS 277/Latest and have a min. galvanizing coating of 275gsm * Other GI profiles Confmg. to IS 277/Latest and have a min. galvanizing coating of 120gsm * MS steel members To be supplied with one coat of red oxide primer coating * Internal wall panels To be one coat of cement primer and two coats of white oil bound distemper * External wall panels To be one coat of cement primer and two coats of enamel paint * 8/10 Colour/Shade of paint As per buyer's choice * Primers to be used As per buyer's choice * Paints to be used As per buyer's choice * WARRANTY Warranty period in number of years 1 1, 2, 3 (or higher) CERTIFICATION Test reports to be furnished to buyer's on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Shashi Chauhan 175103, HEAD QUARTER ROHTANG TUNNEL PROJECT SOLANG VALLEY PO- PALCHAN VILLAGE (NEAR MANALI) KULLU DISTRICT 1 15

sofas

post fence metal angle Post Fence Metal Angle ( 844 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to Specification Conform to CQA, EE, Aundh Camp, Pune Specification No CQAE/5660/1609/d of year April 2006 * CONSTRUCTIONAL Angle Size 45 mmX 45 mmx 6 mm * Length of Post Fence Metal Angle (mm) 1830 610, 1830 (or higher) Minimum Weight 7 Kg for 1830 mm long Post Fence Metal Angle 2 Kg for 610 mm long Post Fence Metal Angle, 7 Kg for 1830 mm long Post Fence Metal Angle CERTIFICATION Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Defence Specification YES * 1/2 Test report to be furnished to the buyer on demand YES * Test Report No and Date - * Name and Address of the Lab - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 844 30

Electronic Theodolite Electronic Theodolite ( 1 ) Technical Specifications * As per GeM Catalogue. Specification Specification Name Values Allowed Values TELESCOPE Image Type Erect * Objective Lens Aperture 45 40, 45, 50 (or higher) Magnification (in X) 30 25, 30, 35, 40, 50 (or higher) Telescope Resolving power (Angle) 3 2.5, 3, 3.5, 4, 4.5 (or lower) Telescope Field of View 1˚30' 1˚10', 1˚20', 1˚30', 1˚40', 1˚50', 2˚ Minimum Focus distance 1 * (or lower) Stadia Ratio (Stadia Multiplication Constant) 100 * Stadia Constant (Stadia Addition Constant) 0 * Reticle illumination true true, false ANGLULAR MEASUREMENT Method of Angular Measurement Absolute Absolute, Incremental 1/5 Units of Angular Measurement, other than degree Gon (gradian), Mil (milli radians) * Resolution (Least Count) of Angular Measurement 1 * Accuracy of Angular Measurement (±) 2 * (or lower) Angular Measurement detection method - Horizontal Dual Sides Single Side, Dual Sides Angular Measurement detection method - Vertical Dual Sides Single Side, Dual Sides COMPENSATION Compensation Dual Axis * Compensation Range (±) 3 Any applicable numeric value Compensator Setting Accuracy 1 0.5, 1, 1.5, 2 (or lower) LASER POINTER Laser Pointer false true, false Method of focusing NA * Laser Range in Daylight(METER) NA 25, 50, 75, 100, 125, 150, NA Laser Class NA Class 2, Class 3 A, Class 3 R, NA PLUMMET Type of Plummet Laser Optical, Laser Imaging Erect * Accuracy of Plummet (±) 1 0.5, 2 (or lower) Magnification (Optical Plummet) NA 2X, 3X, 4X, 5X, 6X, 8X, NA Field of View (Optical Plummet) (degrees) NA 4˚, 5˚, 6˚, NA Minimum Focus (Optical Plummet) NA * Class of Laser (Laser Plummet) NA Class 2, NA LEVEL VIAL/BUBBLE SENSTIVITY Circular Vial (per 2 mm) 8 6, 8, 10 Plate/Tubular Vial (per 2 mm) 30 20, 60 DISPLAY/INTERFACE STORAGE Display Layout On Two Side On One Side, On Two Side 2/5 Type of Display LCD * Display Features Monochrome display * Display Size 3 * Number of Diplay lines 4 line 1 line, 2 line, 3 line, 4 line Data Output RS 232 Port * Measurement Entry Storage Capability (Data Sets) 500 500, 1000, 2000, 5000, 10000, 20000, 30000, 40000, 50000 (or higher) ACCESSORIES Data Transfer Cable Yes * Instruction Manual Yes * Tripod With With, Without Type of Tripod Metallic Wooden, Plastic, Metallic, NA Number of Tripods inclusive in the scope of supply 1 0, 2 Lens Cover Set Yes * Shock Absorbing Carrying Case with Shoulder Strap Yes * GENERIC Ingress Protection IP 55 IP 54, IP 55, IP 56, IP 64, IP 65, IP 66 Tribrach Type Detachable Fixed, Detachable Weight 4.5 * "Dimensions (Size of Theodolite) (in mm X mm X mm)" 153x175x340 * List of Items and Quantity of each Item Included in the Offer DT402L with 1 tripod and sun filter * BATTERY Power Source Rechargeable Batteries * Battery Size, if Non Rechargeable Battery NA * Battery Chemistry, if Rechargeable Battery Ni-MH * Number of Batteries required for operation 1 * Number of Batteries inclusive in the scope of supply 2 0, 2, 5, 6, 10 (or higher) Operating Voltage 6 * Battery Operating 48 * 3/5 (Back Up) Time (or higher) Battery Charger inclusive in the scope of supply Yes * OPERATING CONDITIONS Minimum Operating Temperature -20 0, 10, 15, 20, 25, 30 (or lower) Maximum Operating Temperature 50 50, 55, 60, 65, 70 (or higher) Non Condensing Humidity, Rh @ 40 ͦC 90 65, 70, 80, 85, 90, 95 (or higher) WARRANTY Warranty 1 1, 5 (or higher) CERTIFICATIONS Availability of Test Reports from Central Govt/NABL approved/ILAC accredited Lab to prove conformity to the specification true true, false If Yes, Test Report to be furnished to the Buyer on demand Yes * Test Report No and Date - * Name of the Lab and Address - * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 1 30

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 80 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 6500 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without - Light Source SMD LED Chip - LED Make SYSKA - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde >/= 80 - 1/3 (CRI) Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date 20180113001-13.01.20 18 - Certificare for Luminaire photometric data as per LM79 Yes - 2/3 Certificate No and Date of Luminaire photometric data as per LM 79 report 20180113001-13.01.20 18 - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Dinesh Babu K 335512, 1030 IESPL Opposite Mahila Police Line Hanumangarh Jn Phone No 9468690026 80 30

Light Emitting Diode LED Fixture- LED tube light Light Emitting Diode LED Fixture- LED Tube Light ( 63 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Led tube light power rating corresponding Min Luminious flux 18 Watt/1800 lumen 18 Watt/1800 lumen, 20 Watt/2000 lumen, 22 Watt/2200 lumen Colour Temperature (K) 2700 2700, 4000, 5700, 6500 Warranty for free replacement (Years) 2 years 2 years, 3 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin - Ingress Protection in IP IP 20 - Lamp Shell material Polycarbonate Polycarbonate, Glass LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without - Light Source SMD LED Chip - LED Make SAMSUNG - Length of tube light (Nominal) (in mm) 1220 - FUNCTIONAL LED lamp efficacy (Lm/W) 100 - Colour Rendering Inde >/= 80 - 1/3 (CRI) Total Harmonics (%) </= 15% - LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes - Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes - Beam Angle (Degree) >/= 120 degree - Operating Voltage range (Volt) 100-300 - Driver Efficiency (%) more than 85% - Surge Voltage withstand (KV) 2.5 KV - LED Chip Efficacy (Lm/W) 130 - Rated Voltage for Performance and life (Volt) 220-240 - Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% - LED Chip Wattage (Individual) (Watt) 0, 25 - Power Factor >/= 0.9 - CERTIFICATIONS BIS Registration certificate under (CRS) number and date SYSKA COMPLIANCE-1-1-2018 - Certificare for Luminaire photometric data as per LM79 Yes - 2/3 Certificate No and Date of Luminaire photometric data as per LM 79 report ce -job- del-17-0005000-003 - Compulsory Registration and CRS of BIS for safety to IS 16102-I Yes - EMC Test Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Kumar Agarwal 192212, HQ 760 BRTF, Verinag 63 15

punched tape concertina coils-PTCC Punched Tape Concertina Coils-PTCC ( 90 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Conformity to Specification Coil of Diameter (Closed) 610 mm to Conform to CQA, EE, Pune Specification No CQAE/5660/1602/a of year November 2004, except for Diameter and weight of Coil Coil of Diameter (Closed) 1050 mm to Conform to CQA, Coil of Diameter (Closed) 610 mm to Conform to CQA, except for Diameter and weight of Coil CONSTRUCTIONAL Coil DIameter When Open 580+20 -0 mm When opened upto 6 Metre 915+50-0 mm when opened upto 15 Metre, 580+20 -0 mm When opened upto 6 Metre Coil Diameter When Closed 610+20 -0 mm 1050+50 -0 mm (Coil-1A), 610+20 -0 mm Weight of Coil with 50 turns and 129 Nos Clips 9.0Kg ±5% (Without handles and Spikes) for Coil Diameter 610 mm (Closed) 9.0Kg ±5% (Without handles and Spikes) for Coil Diameter 610 mm (Closed) 1/3 Spike Without Spike for Coil of Diameter 610 mm (closed) With Spike for Coil of Diameter 1050 mm (closed), Without Spike for Coil of Diameter 610 mm (closed) Handle Without Handle for Coil of Diameter 610 mm (closed) - CERTIFICATION Availability of Test Reports from Central Govt./State Govt/NABL/IL AC accredited Lab to prove conformity to the Defence Specification yes - Name and Address of the Lab - - Test Report No and Date - - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Ashok Kumar Agarwal 192212, HQ 760 BRTF, Verinag 90 15

telecommunication cable Telecommunication Cable ( 1000 ) Technical Specifications Specification Specification Name Values Allowed Values GENERIC Govering Specification for telephone pair cable TEC Specification G/WIR06/02 - Conductor diameter Nominal (Range) (mm) 0.5 0.4, 0.45, 0.5, 0.6, 0.63, 0. 7, 0.8, 0.9 Number of pair (Number) 4 1, 2, 4, 10, 20 Lenght of cable in a bundle (Mtrs) 250 100, 250, 500 CONSTRUCTIONAL Telephone Pair cable used for Telecom data transmission, Intercome, EPBAX, FAX, Closed circuit security System. Yes - Conductor Materail Copper - Insulation PVC - Shelding No - Minimum Diameter over insulation (mm) 1.05 - Overall diameter of cable (mm) 6.00 - CERTIFICATIONS Product Conforming to TEC Specification Yes - 1/2 Distinct Color Coding system As per TEC Specification - Availability of complete and satisfactory type test Report from Central govt/NABL ILAC accredited laboratory as per Govering Specification Yes - Test certificate number 58/2018 - Test report date 11/01/2018 - Name of lab where test conducted GHAZIABAD TEST LABORATORY - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Sunil Kumar Yadav 796017, HQ CHIEF ENGINEER PROJECT PUSHPAK ZEMABAWK 1000 15 Required No ePBG Required No