PRTN-CW/WESTERN RLY Tender Results

Yoke support plate for BCNHL wagon to RDSO Drg.no.WD-06076-S-05.

Thread Profile Gauge External (GO & NOGO) Size - 39 x 3 mm (Ring gauge). Wear Limit - 0.5 mm. Ref. Drg. No. W/BD - 353.

HAND BRAKE PULL ROD WITHOUT BUSH FOR B-CAR OF BLC WAGON DRG.NO:- CONTR-9406-S/8.

Swing Door Bolt Pin, RDSO Drg. No. WD-90030-S-66, Item 20, Alt.10 or latest.

SILICON MANGANESE PLATE, thickness- 5 mm

Additional middle coping as per RDSO Drg.No. WD-23018-S-03

Design, Supply, installation and commissioning of Electric Furnace as per attached specification.

12.70 mm dia Lock bolt with collar with required grip range 19.05 mm to 25.4 mm

20MM NB STRAIGHT PIPE FOR AIR BRAKE.

PROTECTIVE TUBE WITH COLLAR AS PER RDSO SKETCH NO - 65232.

RIVET 10MM DIA X70MM LONG FOR SLEEVE TO IRS DRAWING NO.- W/BG-6310.

TRANSMISSION OIL C4 SAE.30

HEX HEAD BOLT WITH NUT AND SPRING WASHER SIZE 20X220MM TO DRG. NO.- EMU/M-3-2-052.

1)BODY SIDE PILLAR (HARD WOOD) 2134 X 108 X 89 mm. 2)BODY SIDE PILLAR (HARD WOOD) Size 2134 X 89 X 76 MM. 3)BODY SIDE Pillar SIZE 2134 X 76 X 76 mm.

Ultrasonic Probes : Single Crystal, 20mm dia

Set of APDs .

1) RELEASE CHOKE FOR KE-2 TYPE DISTRIBUTOR VALVE. 2) APPLICATION CHOKE FOR KE-2 TYPE DISTRIBUTOR VALVE. 3) A SET OF APPLICATION CHOKE FOR KEO TYPE DISTRIBUTOR VALVE. 4) SOLEX JET FOR C3W TYPE DISTRIBUTOR VALVE.

Hard coke Gr. II.IS:439-1989.Minimum Size of Cock-150mm.

32 NB STRAIGHT (ONE SIDE THREADED) PIPE, SEAMLESS TO IS:1239(PART-I) HEAVY GRADE OR ASTM A-106 GRADE-A.

SLEEVE COMPLETE FOR CENTRE PIVOT TO DRG NO. T-0-6-603.

Electronic torque tester of Range: 90-1100 Nm. Specifications and dimensions are as per Attached Annexure: A .

Stacking Stand for Axle. As per PRTN WS Drawing SK No: 1916/P.

ACRYLIC WALL PUTTY

WOODEN WEDGE (hard wood babool) as per drg no SK NO:1447/P.

1)SPLIT PIN OF NOMINAL SIZE 3.2MM AND MINIMUM LENGTH 40.0MM (3.2X40.0 MM), 2)SPLIT PIN SIZE- 4X22MM TO CONFORMING IS 549:74. 3) SPLIT PIN OF SIZE 5X32mm CONFORMING to IS 549/74.

Gauges for ICF bogies to check squareness, alignment, and ensure dimensions and tolerances as specified in the CAMTECH manual as per Annexure A.

Common Pipe Bracket with Control reservoir for DV.

1)Medium strength Loctite 243 or equivalent 2)Activator brand loctite 7471 or equivalent

Set of cross stringer where one set consists of Cross stringer (Near solebar) -1 No, Cross stringer (middle) -1 No, Cross stringer (Inner) -1 No As per RDSO Drg. No. WD 00012-S-04.

Automatic Pressure modification (APM) Device to RDSO Drg.no.WD-09034-S-11

Axle End Cap for Upgraded CTRB (6" x 11") Class 'E