Rifle Factory Ishapore West Bengal Tender Results

Manpower Outsourcing Services - Minimum wage - Highly- Skilled; Others; Carpenter

FACE MILL CUTTER INSERT

BOX FOR ACCESSORIES (Q3)

IC RETAINER (Q3)

PLC BASED AUTOMATIC BODY BARREL BREECHING FIXTURE FOR TAR AS PER ATTACHED SCHEDULE-I, TABLE-A, ANNEXU (Q3)

PLC BASED AUTOMATIC BARREL BREECHING FIXTURE FOR TAR AS PER ATTACHED SCHEDULE-I, TABLE-A, ANNEXURE-I. (Q3)

CARBIDE LINED GUIDE BUSH

COMPREHENSIVE MAINTENANCE CONTRACT (01 YEAR) FOR LIPI PRINTERS. (Q3)

I. C. OF BRACKET (WITH HEAT TREATMENT) FOR RIFLE 5.56 MM INSAS. (Q3)

T SLOT CUTTERS

NEEL VOLTAGE REGULATOR

T SLOT

T SLOT CUTTERS

T SLOT CUTTERS

PACKING BOX FOR 10 NO'S FOR TAR (Q3)

Plain Copier Paper IS - 14490 (Rev) (Q2)

CONTROLLER-SCAPS-MARKING-USC1, ITEM CODE- CTRBJJCZSCAPS-USC1 (Q3)

SPRING EXTRACTOR (Q3)

SOLID CARBIDE THROUGH COOLANT DRILL DIA 6.25 MM (Q3)

FORGING OF BOLT CARRIER (Q3)

BOX FOR ACCESSORIES (Q3)

I/C OF HOUSING SIGHT REAR FOR RIFLE 5.56 MM INSAS. (Q3)

UNIT BURST CONTROL FOR RIFLE 5.56 MM INSAS. (Q3)

INVESTMENT CASTING FOR SLIDE (RETRACTING) FOR RIFLE 5.56 MM INSAS. (Q3)

LEVER PLATE (Q3)

TRIGGER FORGING (Q3)

LOWER HAND GUARD BAND (Q3)

DIFFERENT TYPES OF APRON

UPPER HAND GUARD ASSY (Q3)

SOLID WHEELS(NATURAL RUBBER SOLID CUSHION TYRES), SIZE 6.50 X 10 OF JOST'S FOUR-WHEEL BATTERY OPERATE (Q3)

FIXED BUTT EXTENSION FOR TAR (Q3)

GRIP PISTOL (Q3)

IC RETAINER (Q3)

GRINDING SEGMENT AS PER RFI SK. NO. 6012. ( ENCLOSED) SPECN: 38 A36 F12 VBEP. (Q3)

STEEL ROD DIA 16MM X STRAIGHT LENGTH 3 TO 4 METERS (Q3)

BLOCK GAS RORGING FOR RIFLE 5.56 MM INSAS. (Q3)

S/C T-SLOT CUTTER DIA 15.37 MM X 6.35 MM WIDTH, STRAIGHT SHANK DIA= 10 MM, OVER ALL LENGTH 110 MM, 6 F (Q3)

SOLID CARBIDE END MILL DIA. 2.5 MM X FL 7 MM X OAL 50 MM X SD 4 MM, 4 FLUTED, HELIX ANGLE 30 DEG. TI (Q3)

HONING TOOL SET

COOLANT (CUTTING OIL) HOLTEROL CF160/CIMSTAR 141/BC35 KOMBI SW FOR REFORM GRINDING MACHINE (Q3)

SOLID CARBIDE T SLOT CUTTER

SC DRILL DIA 4.0 MM, SOLID CARBIDE THROUGH COOLANT DRILL DIA 5.0 MM

SOLID CARBIDE END MILL

MS Flat

REPAIRING OF 01 NO. PCU 50 TYPE NO. 6FC5210-ODF20- 0AA0 & 01 NO. OP 010, TYPE NO. 6FC52030AF00-0AA1 (Q3)

SOLID CARBIDE DELTA DRILL DIA. 8 MM, CEL-35 MM, OAL-80 MM, SH. DIA-8 MM, TIALN COATED, WITH THROUGH C (Q3)

FIXED BUTT EXTENSION FOR TAR (Q3)

SOLID CARBIDE T-SLOT CUTTER AS PER DRG. T-21538-G Make: CERATIZIT/KENNAMETAL/TAEGUTEC/HARTNER/GUHRING (Q3)

SOLID CARBIDE DRILL DIA. 5.6 MM X FL 50 MM X OAL 100 MM X SD 6 MM TIALN COATED. Make: SANDVIK/SECO/W (Q3)

SOLID CARBIDE DIA. DOVE TAIL CUTTER AS PER DRG. NO. T- 21765-AR. MAKE: GUHRING/METCUT/WIDIA/FORBES TOTE (Q3)