Loading…
Loading…
1 results • Recent activity
LED Luminaire (Recessed Luminaire) LED Luminaire (Recessed Luminaire) ( 48 ) Technical Specifications Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type - Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I - Types of LED Modules as per the IS: 16103(Part-2)/2012 Type 3 - Rating of Recess type LED Luminaire/System Wattage/Rated Power 6W 3W, 6W, 9W, 12W, 16W, 1 8W, 20W, 24W, 28W, 30W, 32W, 36W, 40W, 48W Light Intensity(System Yes - 1/5 Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Color temeprature (+/- 500 K) 6000 deg K - Type of fixture (in feet) 1x1 (for 3W to 16W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 - Mounting type Recess type - Diffuser material Poly carbonate (UV stabilised) - The luminaire body must be corrosion resistant epoxy powder coated/anadozing Yes - All fastners must be of nickel/chrome plated Yes - Number of electronic control gear (power supplies) 1 - Light Source SMD LED Chip as per LM 80/IS16106 - Warranty for free replacement 2 Years - ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC - Rated voltage 230 V AC 50 Hz - AC Power Factor ≥ 0.90 - Driver Efficiency ≥85 - Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% (for above 20W) Yes - The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes - 2/5 OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes - Working life for LED : (Minimum 50, 000 burning hours as per LM-80 report) Yes - Colour Rendering Index(CRI) ≥80 - Beam Angle ≥120 - Reflector type Diffuser - THERMAL MANAGEMENT Fixture/Luminaire should be die-cast aluminium CRCA/Extruded aluminium Yes - Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes - Junction temperature soldering temperature < 85 deg C - Operating temperature range -10 deg. C to +55 deg. C - Humidity Range 10 % to 95% RH - PROTECTION Short circuit Protection Yes - Over load protecton Yes - High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes - Insulation resistance between earth and current carrying part >100 M ohm - The luminaire shall be protected against surges and transients of >/=2.5 KV Yes - MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed - Each LED liminaire shall have the manufacturer’s name, Yes - 3/5 model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes - REPORTS AND CERTIFICATIONS LED Make EVERLIGHT/EDISON BRIDGELUX NATIONSTAR/SEOUL SAMSUNG/OSRAM REFOND/NICHIA CREE/LUMILEDS PHILIPS/SYSKA LUMENMAX - LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government LAB NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc., ) Yes - LM 80 &TM21(Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab NABL/ILAC accrediated lab. Reports shall be furnish to the buyer on demand (LM-80 report shall have the Photo Biological report of the LED Chip being used in the luminaire) Yes - Availability of test Report from Central Government Lab NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-2/2012 and IS Yes - 4/5 16107 (Part 2/Sec 1) : 2012 Seller has to furnish Type test report to the buyer on demand Yes - DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes - LED Luminaire for rcess type shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 2): 2012 as applicable on date Yes - * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 N Abdul Jaleel 744101, SECRETARY, PORT BLAIR MUNICIPAL COUNCIL, INDIRA BHAWAN, MOHANPURA 48 15 EMD Required No ePBG Required No