South Central Railway Tender Results

Straight Metric metal thread End fitting

Galvanized mild steel tubes electrical resistance welded (ERW)/high frequency induction

HEX HEAD SCREW M16X120 Confirming to IS:1364-2002, PT-1, IS:1367-2002, PT- III, 10.9, CE, MDTS-057

Napthalene pure in prime white balls packed in 1/4 Kgs Plastic Packets Specn No. IS:539/1988.Grade-1.

Deep Freezer

Set of fasteners

Composite PE-AL-PE male connector

G.I.Bolt of size 16 x 90 mm

Set of items to bracket

Channel

G I Bolt

Mounting Frame for self-priming

Set of S.S Bend Pipe

Base plate for seating

ALUMINIUM EXTRUSION LENGTH

OVERHAULING KIT FOR WIPER MOTOR

Oil Thrower (Outer) of TM 4303 Motor (BHEL make) for MEMU/ DEMU

Wind shield

Hexagonal Head Bolt

MFT_SUR_[PH NO. 36165] CATHETER MOUNT

Oil pipe complete for CGR to REPL part no : S3423a or to Anantashree part no : G3423a. ((As per UVAM ID : 2100713).

S S pipe

HQ_Med_Sur_ZRC_Zonal Rate Contract for supply of (PH NO.:47312) DISPOSABLE SURGEON GOWNS (LARGE)

"Intermediate Wheel, Right Hand Drive for Tap Changer."

TERMINALCONNECTOR ASSEMBLY

Corrugated wire wound Resistor 22 ohms, 100Watts for RLC Panel of Auxiliary winding in 3Phase Locomotives.

"Locking plate for Thrust pad Axle box".

"Set of Drivers Seat and Backrest."

Rubber Tube(sleeve) for inserting CP incoming cables(Insulation)

"Paint Enamel Synthetic Exterior Finishing, Black table 1 to IS: 8662 (Reaffirmed 2019) ."

"Resistance complete unit for Traction Motor Voltmeter (RU 1 & 2) 88 kilo ohms, 9 watts as per CLW specification No.CLW/ES/I-21 Alt-B or latest."

Helical inserts size: M16 x 1.5 pitch x 1.5 inch length for 3-phase locos.

HQ_Med_Sur_ ZRC_(PH NO.: 36091) Double Lumen Central Venous Catheter Kit 7Fr, 16cm

"Terminal block assembly complete for Auxiliary motors (MVMT/MVRH/MPV) to ref nos. 1 to 7 as per S.C.Rly drawing No. A3/EL/CONV/2682."

Signaling lamp box

Set of earth shunt assembly.

Pin Clevis for 10"Bogie Mounted Brake

Kit of Spares for Knorr make Pressure Reducing Valve (1136508/0500). (Full Description is as per Annexure enclosed in the documents).

Door Catch Assembly.

"D-1 Auto Drain Valve"

"Set of Hex. Nut with One Spring Washer & one Flat Washer. 1.Nut Size M14x2mm pitch, IS:1367, ISO 898-II, Property clause:10 2.Flat Washer: IS:2016 Thickness: 2.5mm. OD - 28mm ID 16mm 3.Spring Washer: IS: 3063, B14 Thickness: 3.00 mm OD: 23.5 mm ID: 14.00 mm."

WELD MESH PARTITION FRAME

LED type COB(Chip-on-Board) Downlighter 3 Watt, 110V DC 6000K(KICOB-67 LED 6000K) as per CLW Spec. No. CLW/ES/L-22/D or latest if any for WAP-4 locos.

AUXILIARY RESERVOIR 100 L

Bull Gear(107 teeth)

Set of Hex. Head bolt full threaded size: M10 x 50 x 1.5 mm.

RICE FILTER

Set of 4 leg lifting chain Sling along with assembled accessories.

Digital LCR(4 1/2 digit) meter to M/s. Kusam-Meco make or its Similar.

LEVER & BEARING ASSLY-LEFT BANK TO