South Central Railway Tender Results

Retaining Ring

SUPPLY OF MAGAZINEBAG

SUPPLY OF FOOT REST

Supply of 72mm dia U Clamp

Nitrogen module to Sanrok Part No. 2ED-245-4989 for Automatic Fire Detection cum Suppression System.

Set of Spares suitable for FS CURTIS Screw Air Compressor

STAINLESS STEEL HEX NIPPLE

POLY URETHENE (PU) TUBING OF 10mm OD x 7mm

MFT_SUR_(PH NO.:31055) RYLES TUBE NO.16

ELBOW EQUAL

LED light fitting for passenger alarm chain indication type I (3 watt) for MEMU coaches as per RCF drawing no. LW 76098, confirming to RDSO specification no. RDSO/PE/SPEC/TL/0091-2016.

MFT_SUR_(PH NO.:47018) B.P. BLADES SIZE 21 (BOX OF 100)

Circuit breaker for Traction Motor blower

Kit Gasket Lube Oil Scavenging

Spherical Bearing for BMBS Casnub Bogie as per RDSO Drg No. WD-08093-S/2, Item-17, Alt-3 confirming to RDSO Spec. No. WD-23-BMBS-2008 (Rev-1) with amendment No.1 of Sept 2016 suitable for KBI Part No.768522 or similar.

Consisting of items as per tender

GI REDUCER SOCKET

PVC Sticker

Link Pin

TAPPING SCREW

DUNGRY CLOTH COTTON KHADI DYED BLUE

Set of gaskets

Supply of KIT , LOWER ENGINE GASKIT

Supply of PCB ASSY

70 degree 2MHz 15 mm dia. 15 x 15 mm square crystal size single crystal for hand probing

Bolts S/S with Nuts & L Nuts10x35x30 mm

Portable Neck Band PA system as per attached specification.

Pneumatic control unit (Valve-plate)

Stainless Steel plate of size 2500 x 1250 x 2mm Thick

Set of Hardware items for gear case of WAG-9/WAP-7 locomotives. Set consists of 11 items Set details attached Annexure-A.

Supply and Installation of Multifunction Ink Tank Colour Printer

4 X 1.5 Sqmm multicore screened

Motor over load relay

PORTABLE HANDHELD INFRARED THERMAL IMAGING SYSTEM (THERMO VISION CAMERA) WITH ALL ACCESSORIES as per RDSO specification no TI/SPC/OHE/TIPS/1031, dt. 12/2013 Similar to Brand Name: KUSAM MECO of Model Name: KM 308. (Warranty Period : Up to 12 months from the date of delivery.)

Air Vent Assy for LHB AC 3 Tier Economy coaches as per RCF Drg. No.- ED64012 Alt-'a' and compliant to HL3, Colour Shade is RAL-7004, Signal Gray

Counter weight eye rod

TUBULAR STAY SLEEVE FORGE

2 mm Damping Choke for wiper servo motor as per SC. Rly. Drg. No. C/ELS/LGD/Pn.Eqpt/4/73.

S S WIRE ROPE FOR 3 PULLEY TYPE REGULATI

SHAFT - WATER PUMP to DLW Part No. 16240388 as per Drg.No.8052246 Alt.- Ub or latest. Material Specification: AISI 303

Halogen Bulb of 24 Volts

BOTTOM HOUSING FOR CONSTANT CONTACT POLYURETHANE SIDE BEARER PAD ASSEMBLY AS PER DRG NO: AAL-021101, ITEM NO. 2, ALT-8 CONFORMING TO RDSO Spec. No. WD-38-MISC-2004 Rev. 3 of Apr-25.

Locking Plate for Pivot Housing for WAG9/WAP7 as per CLW drawing No 1209.01.413.025 Ref 1 and 2.

Seal 'O' ring, for fuel oil suction stainer and TSC lube soak back filter to EMD Part. No. 8343161 and DLW part.No.16170878. EMD Drg.No.8343161 Alt.E.

Split pin cotter Steel 6.3 X 80 mm to IS: 549/2005

Polyester sling (4-legged) as per PLW/PTA Drawing No.ET-0473 Alt-Nil or latest.

HOSE FLEXIBLE 1/2 inch ID IN METRES - STD LENGTH 15 MTS-TO SPECIFICATION SAE 100R5, CAT NO: 16413121. MAKE: ESKAY or Soni or impex or super seal or poly hose or its equivalent

Modified stopper for Pin for WAP-7/WAG9

RATCHET ASSEMBLY FOR COUPLING SOCKET ASSEMBLY SUITABLE FOR ZS IV COUPLERS OF LHB(EOG) TYPE AC/NON-AC COACHES/ POWER CARS of DRAWING NO. LW 71330, to CONFIRM AS PER RCF SPEC.NO. EDTS-105, REV.E WITH AMEND 1, 2 & 3

EQUAL TEE