South Central Railway Tender Results

EMUDHRA Signing Certificate Brand: EMUDHRA (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687742438018 dt.17/08/2026)

MFT_SUR_(PH NO.:276470) Peripheral Nerve Stimular Needle (23G, 25mm Insulated) ACCEPTED MAKE / BRAND: B BRAUN

hp OEM Ink Cartridge Manufactured by HP India Sales Private Limited Brand: hp (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687713765196 dt.17/08/2026)

GPS ANTENNA

WEAR PLATE FOR COUPLER HEAD ASSEMBLY

STARTER MOTOR to EMD. PT. NO. 10478829. DLW part No. 18090011.

Pipe Clamp

Sand Ejector assly,for WAG 9/WAP 7 locomotives.

SNUBBER SPRING FOR CASNUB 22HS BOGIE to Drg. No. WD-92058-S/5, Alt. 14, Item No 3 confirming to RDSO Spec. WD-01-HLS-94 (Rev-5) of Dec-2024.

Connector Cable BNC TO BNC 2 Meters Leng [Connector Cable BNC TO BNC 2 Meters Length]

Arc Welding Electrode

Turning Cassette LH for INSERT

Draft gear Bracket

Frame Lower

ALUMINIUM CORNER STRIP

6 Amps Cylindrical ceramic Fuse

Rubber grommet

S-TRAP FOR 100 MM

TWO-PIECE GLASS SHUTTER

MALE CONNECTOR 3/4 inch

Set of levers for Bogie Brake Beam Arrangement

MFT_SUR_(PH NO.:309742) Reagent for estimation of LDH in patient samples for use in Roche Cobas C311 equipment.

Moving Coil Vibration Prof Ammeter

Set of "O" Ring for Motor Suspension Unit (MSU), material as per NBR 70 DIN3771(ISO3601) or latest as per attached Annexure.

Blocking diode complete for Control Circuit 10 Amps. as per CLW specification No. CLW/ES/D-2 or latest and confirming to CLW drawing No. CLW/ES/SK-1/D-1, Alt-B or latest.

Hydraulic D.C Valve as per Plasser Part no. HY10RSH-B. Rexroth part no. 4WE 10H 3X/CG 24 N 9K4. Make: Plasser, Rexroth

METALIZED CARBON STRIPS SUITABLE FOR HIGH REACH PANTOGRAPHS WITH AUTO DROPPING DEVICE (ADD) PROVISION AS PER RDSO.SPECIFICATION NO .RDSO.2014/EL/SPEC/0114, REV.0, DT MAY 2014, RDSO Drg.NO.SKEL-4994(Alt-0) or latest.

SPRING WASHER,SINGAL COIL,FLATEND SIZE M-16,TYPE B AS PER CLW Specification No. CLW/MS/3/085 Alt-9 OR LATEST.

SPECIAL SCREW FOR AXLE BOX GUIDE

Set of items for Axle Box Guide Arrangement

Kit for Distributor valve C3W as per FTRTIPL Part Number 790501532 consisting of 59 items as per attached Annexure.

Insulation Monitoring Relay

GLASS FIBRE BAG FILTER TO DRG No: RDSO/SK DP 3505 ALT 7.

Carbon brush, starter motor to EMD part No.1852886. DLW part No.18420138 our REil equivalent part No.95201253.

Pickand Carry Hydraulic Mobile Craneasper IS4573 (Old Generation Hydra Cranewith Rear Mounted Cabin) (Q2)

Computer Printer (V2) (Q2)

(PH NO.:09022) RISPERIDONE 2 MG LS TAB,UNIT:TABLET

MIG/ MAG welding filler wire to IRS-M46-2020, Class-VI.

Oil pump(TFPMPH) fixing bracket.

LIGHT WEIGHT SYNTHETIC PRE- FABRICATED WATER PROOF TENT. Make: STANLEY Model No: STMT72794 or its equivalent. Note: Material Test report should be submitted along with the material.

M S SPLIT PIN OF SIZE: 3.5mm X 50mm, IS:549, ZINC PLATED.

Procurement of SS Wire brush 5 rows with wooden handle as per IS: 4517/1967. Specifications: 1.The steel wire is to be made of stainless-steel material to grade 304 and of the diameter of the steel wire to be in the range 0.30mm to 0.355mm and length of each strand is 35mm, 75 holes in total and the density of strands in each hole (tuft) is 18 nos. 2. The base wooden material (brush head) is to be of thickness 17mm, width 50mm and length of the brush head 180 mm and the overall length including the handle should be 300 mm. Makes: WSPS, SSAS, ESAB, ADOR or any ISI marked.

04 types of Hexagonal head screws of different sizes.

Push button switch gasket as per Drg. No. B/TRS/RC/4/264

Lever Lateral-3 Position Actuation valve 1/2 inch BSP parallel female , 5/3 Closed Centre function Working temperature -5 C to +70 C, Maximum working pressure 0 to 10 Bar. ( Part No. : 21253319) Qty-04 nos.

Breather assembly for Hitachi gear case

VESSEL SEALER WITH ALL ACCESSORIES

Galvanized mild steel tubes electrical resistance welded (ERW)/high frequency Induction welded (HFIW)/hot finished welded (HFW) conforming to IS: 1239/Part - 1/1990. (fifth rev) with amdt no 1 to 5 screwed at both ends as per IS: 554/1985 socketed at one end other end protected with plastic thread protector. The socket conforming to IS: 1239/Part-ii /1992(fourth rev) with amdt. No.1 in random length of 4 to 7 mtrs g.i. pipe shall be duly ISI marked as per statutory requirement nominal Bore dia 25 mm medium grade.

PVC Insulated multi stranded aluminium cable single core of size 35sq.mm.(7/2.5 mm)

Miniature Circuit Breaker (MCB) 2.5 Amps 110/130V DC Single pole with extended terminal as per RDSO Drg. No. SKEL-3700, alt-1 and SKEL-4034 alt-1 to RDSO Specification No.SPEC/E-12/1/04 OF 92 with Amendment No. 01 of June 1993