South Central Railway Tender Results

INBUS RIP SCREW M8x20

Excavating conveyor Belt as per PLASSER Part No:RE20.725 Make:Plasser, Dunlop, Nirlon,MRF,MR,Virshubh,Biswas& Jagriti

Set of Stainless Steel Hex head full threaded bolt

Supply of 2 feet x2 feet FOS Aluminium Surface Mount LED Panel Light LED ceiling light, rated power 40w, rated voltage 230v AC,50Hz, LED chip efficacy 130 lumen/watt, colour temperature -6000K, size of fixture- 600mmX 600mm, shape of fixture- square. (As per GEM Budgetary quotation attached.) Accepted makes: Havells, Philips, Orient, Wipro or equivalent.

Supply of Omron make ,model:-Z-15GW22-B,Limit switch(with roller lever actuator) with (1NO +1NC) contact (technical spec attached) Accepted makes:- Omron,Honey well,Heschen, telemechanique,seimens or similar

MFT_SUR_(PH NO.;309863) Reagent for estimation of Triglycerides in patient samples for use in Roche Cobas C311 equipment.

FRP TISSUE 0.5 x 90 x 3460

Set of hardware items for Axle Box

MFT_SUR_(PH NO.:309813) REAGENT FOR ESTIMATION OF ALT in patient samples for use in Roche Cobas C311 equipment

MFT_SUR_PH NO:.(308096) Reagent for Estimation of Prothrombin Time in Patient sample for ERBA Coagulation Analyser ECL760 (Pack of 10 x 5 ML)

Contact wire Parallel Clamp

Support plate for Roof fixing device as per S.C.Rly drawing No.C/ELS/LGD/RC/4/3.

Panto Gauge + Adaptor as per FTRTIPL Pt. No.790022202

Procurement of Stop Cock and Valve for Track Machine.

Nylon spindle for EP valve as per ELS/BZA Drg. No. B/TRS/HTC/4/46, Alt - 2 or latest if any.

Test Bench for Master Controller for 3-Phase AC locos with facilities as given below. (1)Facility for checking of CAM switch conditions with respect to angle transmitters out put current with the help of LED indication. (2) Provision of one digital mA meter to measure angle transmitter current. (3) Provision of checking reverser switch status in Forward Neutral & Reverse conditions. (4) Provision of variable DC power supply with digital voltmeter for master controller supply voltage ( Standard supply voltage is 24 V DC) (5)Input Supply :230 V AC/1A.

Tread wear gauge (Wheel profile gauge) as per RDSO Drg. No. SKDL-3592 Alt-06 for thick f lange profile and wear adopted profile combined for B.G. Locos, made of stainless steel with hardware measuring pointers Make: PIE/JOYTHI ENTER PRISES (OR) Equivalent. Note: Calibration Certificate should be produced at the time of supply along with material.

Supply of silica gel

IOH Kit for Air Dryer Make SIL as per Annexure (17 Items 48 Nos) or equivalent as per CLW/MS/03/041 Alt-1.

Joint for Circuit Breaker (DJ) as per S.C.Rly drawing No.B/TRS/RC/4/136.

Set of spares for the use of Airless Paint machine. model-50:210 MAKE : VR COATING Set consists of following items. 1). PISTON SEAT,PART NO.0421003500 QTY-05 NOS 2). BALL 14 ,PART NO.0421001305 QTY-05 NOS 3). MIDDLE PACKING CAP,PART NO.0421001519 QTY-05NOS 4).MALE PACKING CAP,PART NO.0421000519 QTY- 05NOS 5) FEMALE PACKING CAP,,PART NO.042100319 QTY -05NOS 6)SENSING VALVE, ,PART NO.6111000800 QTY-10 NOS 7) SIDE BLOCK ASSLY, ,PART NO.0208100100 QTY -05 NOS 8) BALL28 ,,PART NO.0407001319 QTY-10 NOS 9)PISTON ROD,,PART NO.0421008617 QTY-02 NOS 10) SLIDER ASSLY,,PART NO.0230002400 QTY-05 NOS 11)SUCTION HOSE 1"X1" 1.2 Mtr Long ,PART NO.100710207 QTY-02 NOS 12)Filter Cassette 60 mesh ,PART NO.1800106000 QTY- 35 NOS 13) Airless Spray Gun Falcon ,PART NO.0608700003 QTY-03 NOS MAKE : VR COATINGS or TITAN or JAGUAR or EQUIVALENT

CHANNEL ASSLY

"Accessories for circuit breaker Auxiliary compressor, type-HKSS, 2 NO as per CLW specification No. CLW/ES/3/0037 Alt. H or latest and ABB document No- HBTB585557R1200 or latest."

3.0 KV single core multistrand traction motor power cable of nominal size 300 Sq.mm with Ethylene Propylene Diene Monomer (EPDM) Insulation as per RDSO Specification No. ELRS/SPEC/ELC/0019 Rev.4 Feb., 2018 or latest. (As per UVAM ID: 3100270).

EMERGENCY WINDOW

Set of items for tap changer of WAG7

Smaller Master Controller Assembly

Safety Valve 3/4" set at 11.5kg/sq.cm

Wire mesh of SS-304 Grade

Door catch assembly as per CLW drg. no. 1209.09.433.019 alt.2 or latest and ABB drg. no. 182-00356 Rev.0 or latest.

Set of Illuminated Push button switches for 3 phase locos as per CLW Spec. No. CLW/ES/3/0072/D. Set Consisting of 6 items. 1) Illuminated pushbutton constant speed control, Spec. no. Green Black/Bezel standard - 1 no. 2) Illuminated pushbutton fault indication, Spec. no. Yellow - LED 380 VAC - standard - 1 no. 3) Pushbutton vigilance control Spec. no. Green Black Bezel standard - 1 no. 4) Pushbutton reset vigilance control, spec. no. Yellow Black Bezel - 1 no. 5) Illuminated pushbutton parking brake, Red - 1 no. 6) Illuminated Switch emergency flash lights, 2 positions Yellow - 1 no. as per Drg.No. xxx specn: CLW Spec. No. CLW/ES/3/0072/D

TUBE STEEL BLACK SEAMLESS,HEAVY GRADE, NOMINAL BORE 15 MM IN RANDOM LENGTH OF 4 TO 7 MTRS, SPECN. IS:1239 PART-1

Cast Aluminium Alloy Acro Foil section impeller duly balanced suitable for smoothing reactor cooling blower MVSL to CLW Specification:CLW/ES/B-14,Alt-"C".or latest The impeller shall generally confirm to drawing no.A3/EL/AUX/2606, Alt-'A' and supplied duly spray painted. UVAM ID: 2100717

Connector female assembly suitable to IV coupler & ZS coupling socket for PHASE, NEUTRAL & EARTH.

Overhauling Kit for M-36/48 Schedule

Split PIN, Steel, size:10 x 100 mm.

Three piece design 1 inch Ball Valve with steel body and screwed end double female with lateral dismantling.

5W Walkie Talkie Batteries for MOTOROLA XiRP 6600i (Li Ion , 7.4 Volts/2450mAH) as per specification RDSO/SPN/TC/107/2018 or latest. Firm should enclose the BIS Certificate.

MFT_SUR_(PH NO.:42603) SYNTHETIC ABSORABLE COATED VICRYL RAPIDE UNDYED BRAIDED 3/8 CIRCLE REVERSE CUTTING 26 MM, 45 CM SIZE 3-0 (12 FOILS PER BOX)

Kit overhauling piston valve

Kit overhauling piston valve

Support bracket assembly of BP&FP as per Ref.No.1&2 of S.C.Rly.Drg.No.C/ELS/LGD/Pn.Eqpt/3/36. Note:- Ref.No.2 should be welded to Ref.No.1.

MFT_SUR_(PH NO.:42378) DERMA ROLLER 1.5 MM, 1 MM

Tape cotton white variety No.6 in rolls of 50 mtrs size 20 mm Width X 0.20 mm Thick to IS: 1923/2003.

Procurement of Valves for Track Machine.

Electrode (Cutting) size-Dia 4.00mm X Length 450.00mm class N1 as per Specification No:IRS-M28-20 or latest.

Inspection cover complete unit for Traction motor type HS-15250A as per ref Nos.1 to 5 of S.C. Rly drawing No. C/ELS/LGD/TM/A2/5, Alt-1.

SUPPLY AND INSTALLATION OF AUDIO MIXING CONSOLE AS PER SPECIFICATION ATTACHED. ACCEPTED MAKE/BRAND-YAMAHA OR SIMILAR

(PH NO.:32085) MICRONISED PROGESTERONE 200 MG TAB,UNIT:TABLET/CAPSULE

High Frequency Radio Surgery Unit (Q3)