South Central Railway Tender Results

TERMINALCONNECTOR ASSEMBLY complete

Stone grey Enamel paint colour

Locking assembly for cab

Mounting Bracket Outer

Support Bracket Outer for BALANCED DRAFT

Supply of 30 Mbps 2W/4W LAN extender supporting upto 10km or more with dual power supply AC/DC from single socket as per attached specification. Make:- MROTEK or similar

RING FOR SUSPENSION TUBE BEARING TO BLW PART No: 17043980 AND EMD DRG. NO. 40076190 ALT-Ab.

FUEL GLOW ROD WHEEL (WHEEL VALVE) TO EMD

M.S sheet of size 2.5 MTR (L) X 140 MM(W)

Synthetic rubber based contact adhesive

Fluid Level Switch

Vinyl coated upholstery fabric to drawing/Spec.No. RDSO/2008/CG-07, Rev-01 of width 1270 mm in continuous roll length of 30 metres minimum. The excess length shall be multiples of 5 mtrs and maximum length of 40 mtrs. Colour: as per RDSO approved sample no. ALNAC-03, as per drawing/specification: RDSO specn.no. RDSO/2008/CG-07, Rev-01

Double Ended Ring

Thin walled electronic E beam irradiated

Bush for TAP changer to REPL part no : S2517 or to Anantashree part no : G2517. ((As per UVAM ID : 2100713).

Set of Hoses as per FTRTIPL Part No.790008206 or M/s KBI Part or its equivalent. Set consist of 02 items. Set details as follows. 1) 1 inch UIC Hose MREP as per FRTRIPL Part No.008002000 or KBI Part No.II76087.-02 Nos. 2) 1 inch UIC Hose 905mm long W/O as per FTRTIPL Part No.008002100 or as per KBI Part No.II76088.-02 Nos.

Overhauling Kit for C2N Feed Valve of M/s SIL Make Consisting of 14 items as per Annexure.

Welding Helmets to IS: 5983 as per attached GeM specification.

Kit overhauling KE valve NYAB

Cobalt drill bit

POLY URETHENE (PU) TUBING OF 6mm OD x 4mm ID of length L=100 meters

Heavy Duty Hand Cart

Set of items consisting of (1) Split cotter pin as per ref; No.26 of SK.VL 584 Alt-2 or latest of size 3.2 x 40 mm to IS: 549/2005, Qty-32nos. (2) Split cotter pin as per ref; No.43 of SK.VL 584 Alt-2 or latest of size 6.3 x 80 mm to IS: 549/2005, Qty-24nos. (3) Split cotter pin as per ref; No.45 of SK.VL 584 Alt-2 or latest of Size 6.3 x 60 mm to IS: 549/2005,

Cable lug

Side Lamp Fitting complete for brake van (without lamp) to RDSO DRG. No. SKEL- 4094. The outside of the fitting should be finished in synthetic enamel Red paint to IS:2932. However, the firms may quote for latest Specn./Drawing with amendment if any issued by RDSO/ICF/RCF.

HYDROMETER ASSEMBLY COMPLETE AS PER SOUTH CENTRAL RAILWAY DRG. NO. EL/TL/656 ALT-1, CONSISTING OF (1) BULB WITH PERFORATED STOPPER, (2) GLASS BARREL, (3) GLASS HYDROMETER FLOAT & (4) SIPHON NOZZLE.

Set of Retaining Ring ( Pivot Ring & Housing Ring) for housing of traction bar. Set consisting as per the attached Annexure

PORTABLE WELDING PLANT

LUBRICATING OIL FOR HYT SURFACE WHEEL LATHE, Make: HPCL - HP WAY LUBE-68/ IOC - SERVOWAY-68 /BPCL - METAMOL- 68 /IML WAY -68/ IPOL- 68 or similar

Lavatory door arragt. for NONAC coaches to ICF/STD-5-6-011, col. III-50%, col.IV- 50%, Alt.C.Panel i.e, item -2 of the drg. To be as per RDSO specification no c-k514, Corrigendum No.1 of June, 2015 & Amend.No.7of Aug, 2016, colour and shade as per RDSO approved sample no. NAC %u2013 SP05 (Panel should be procured from ICF approved sources (U-VAM ID: 2300191001) and firm should submit necessary document along with material)

Procurement of Pumps and Valves for Track Machine.

ROLLER as per Plasser Part No: 64.14.1214 with Nut Part no. DL150.11a and Fitting Key Part no. DL150.04, Make- PLASSER, DEW

MALE CONNECTOR

Set of 3 Phase traction Motor Bearing for type 6FRA 6068 of WAP7/WAG9 locos consisting of 2 Items details as per attached Annexure.

Mobile Contact Segment Assembly for Reverser/ CTF (1500A) as per CLW Specification No. 4TES.101.004, Alt-2 latest and conforming to CLW Drawing No.2TWD.101.050, Alt-7 or latest. NB: The Latest Alteration Number applicable implies the Alteration Number that is prevailing on the date of opening of the Tender only.

SET OF LIMIT SWITCHES FOR BL BOX of Make Siemens consisting of 3 items: (1) LIMIT SWITCH 1 N/O + 1 N/C TYPE:3SE3-020-0AZ1, Qty/Set - 5 Nos. (2) LIMIT SWITCH 2 N/O + 1 N/C TYPE:3SE3-023-1AZ1, Qty/Set - 4 Nos. (3) LIMIT SWITCH 1 N/O + 2 N/C TYPE:3SE3-023-0AZ1, Qty/Set - 3 Nos.

Pantograph Arm Cab

Procurement of Alternators for Track Machine.

HQ_Med_ZRC_Zonal Rate Contract for supply of [PH.No.37090] DOUBLE LUMEN HAEMODIALYSIS CATHETER KIT (CURVED, 11.5-12fR X 13.5 CM) CONTAINS DOUBLE LUMEN CATHETER-01 NO.J-TIP GUIDE WIRE 0.38" - 01 NO., DIALATOR-01 NO., INTRODUCER NEEDLE 16 G X 7 CM - 01 NO., SEALING CAPS -02 NOS, SURGICAL NEEDLE SUTURE-01 NO, WOUND DRESSING-2NOS., STERILE WRAPER- 1NO. SCALPEL BLADE SIZE:11-1NO.

Cylinder wear half Nylon

Split Pin

Movable File Storage System

Custom Bid for Services - Annual Maintenance contract for 39TR water cooled chiller AC plants in control office at Sanchalan Bhavan, Secunderabad for a period of 3 years Similar Category Comprehensive Annual Maintenance Services for Precision Air Conditioners

Custom Bid for Services - ROH of Wagons Sch I Manpower cost (Highly skilled Welders Gas cutters Skilled Fitters Painters Riveters Forklift drivers Unskilled manpower and Highly skilled Supervisors etc) as per scope of work, Custom Bid for Services - Sch II T&P items supplied by Contractor as per scope of work, Custom Bid for Services - Sch III Consumables supplied by Contractor as per Scope of work, Custom Bid for Services - Sch IV Uniform & PPEs supplied by Contractor as per Scope of work, Custom Bid for Services - Sch V EPF (including GST 18 percentage), Custom Bid for Services - Sch VI ESI (including GST 18 percentage), Custom Bid for Services - Sch VII BONUS (including GST 18 percentage) Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage

Monthly Basis Cab & Taxi Hiring Services - Hatchback; 1500 km x 320 hours; Local 24*7

Split Air Conditioner, Wall Mount Type (V3) ISI Marked to IS 1391 (Part 2) (Q2) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No

Portable Power Generators (Q3)

Tappingscrews (Q3)

Moulded Case Circuit Breakers (MCCB) Conforming To IS/IEC60947 (Part2) (Q2)

Circular Sheathedwith Flexible Conductor (V2) ISIMarked To IS694 (Q2)