South East Central Railway Tender Results

Forklifts (V2) asper IS6765: 2003and IS10517 (Q2)

LED Luminaire For Road And Street Lights Conforming To IS10322 (Part5/Section3) (V3) (Under BISScheme-II) (Q2)

Ratchet Type Torque Wrench (Q3)

"Electrification work with 1x25 KV, 50HZ A.C., single Phase in connection with (i) Construction of Y-Link line from Durg direction line to Dallirajhara line at Maroda Yard and (ii) Construction of Centralized sick line and associated developmental work at Bhilai in Raipur division over S.E.C.Railway"

Digital Multimeter (Q3)

Execution of Boring, Casting of RCC Piles and Lateral Load Testing of Piles in Major Br. No. 06, 54, 59 and 66 and other miscellaneous allied works in BSP-SKT section in connection with BSP-JSG 4th line.

truermsclampmeter (Q3)

Aluminium Paintfor General Purposesin Dual Containeras per IS2339 (Q3)

Custom Bid for Services - Monthly charges for hiring 1 NonAC diesel petrol operated road vehicle for a period of 24 month for official use of Sr DME Co Raipur includes all taxes license fees permits driver salary vehicle repair and maintenance etc, Custom Bid for Services - Additional charges per km for running the vehicle over and above item no 1 on kachcha or pucca road as directed by the Railway officer including GST Similar Category Support Services Vehicle Hiring Service - Per Vehicle-Day basis Support Services Vehicle Hiring Service - Per Vehicle-Day basis

rugged laptops

Execution of Civil Zonal works including white washing and colour washing between BIG(Ex) to PND(Ex) under the jurisdiction of Assistant Divisional Engineer/Pendra for the period ending 30.06.2027.

Execution of Civil Zonal works including white washing & colour washing from PND(In) to Anuppur (Ex) including Officers Bunglow & Holiday homes at Amarkantak under the jurisdiction of Assistant Divisional Engineer/Pendra for the period ending 30.06.2027.

Execution of Civil Zonal works including white washing and Colour washing from USL (Ex) (Excluding BSP Settlement) to AKT (In) including office of the ADEN/Central /BSP & SSE (P.Way)/ BSP under the jurisdiction of Assistant Divisional Engineer/Central/BSP for the period ending 30.06.2027.

Execution of Civil Zonal works including white washing and colour washing from USL(In) to BIG(In) under the jurisdiction of Assistant Divisional Engineer /Central/ BSP for the period ending 30.06.2027.

Register (V2) (Q4)

COUPLING ROD COMPLETE FOR HIGH REACH PANTOGRAPH TYPE.....

ENGINE CONTROL SWITCH

ANTI -TRACKING VARNISH TM [EXCUDING HITACHI TM]. ALKYED RESIN BASED AIR DRYING PIGMENTED RED COLOURED VARNISH TO IS-10026 PART 3 SECTION 3 FOR CLASS 130 FOR FINISHING COATS ON FIELD COILS AND AUXILIARY MACHINES I.E. BECTOL RED F-93 OF M/S. ELANTAS BECK INDIA, PUNE OR Equivalent.

COMPOSITE GROOVED RUBBER SOLE PLATE(CGRSP) FOR 60 KG. UIC RAIL WITH 6.2 MM THICKNESS DRG: (RDSO) RDSO/T-6618 SPEC: (RDSO) T- 55-2025 Revision-01

High speed steel Parallel shunk twist Drill Bit, size-4 mm suitable for stainless steel. Make: Bosch, KPT, DEWALT, taparia & Miranda specn: High speed steel

D.C. circuit breaker of rating -1 pole, 6A, 250V As per CLW specification no.CLW/ES/3/0037.....

Supply, installation & Commissioning of Automatic RO water purifier plant, Capacity- 250LPH.

Primary Brake Beam Assembly as per RDSO Drg. No. WD-08093-S-2, Alt.3, item No.1 to RDSO Spec. No. WD-23-BMBS-2008 (Rev.1) with amendment-1 of Sept- 2016, KB Part No. I.3.5111

Register (V2) (Q4)

Portable Power Generators (Q3)

Hand brake pull rod for BOXNHL wagon as per RDSO Drg. No. WD05086-S- 19, Alt.No.9, Item No. 4. Material and specification as per drawing.

Washer Plain Punched steel size M-12, to IS:2016-67(Reaffirmed 2001) Amends 4 Table-II Make brand- self

Water Pump Assembly for wiper assembly of 3Phase Locomotive as per CLW Spec.- CLW-MS-03-050,Alt-6 , CLW Drg-1209-08-032-023-LT or Latest of Make- ELGI Part No. 090344160 or similar. Accepted Descripti

Alvania-3 Grease of make : Shell OR Mebilus-2 of make : Indalco OR GP5 of Make : IOC Accepted Make/Brand:-SHELL GADUS S2 V100 3

Cock AHB 200 NW

1)Wear Plate as Drawn, Plasser Part No. RE [Wear Plate as Drawn, Plasser Part No. RE15.122, Make: Plasser.] (2) Wear Plate as Drawn, Plasser Part No. RE [Wear Plate as Drawn, Plasser Part No. RE15.122, Make: Plasser.] (3)Washer, Plasser Part No. 64.09.1384, Make: Plasser(4)Washer, Plasser Part No. 64.11.3184, Make: Plasser.

Bolster Spring Snubber for CASNUB Bogie (20.3 T Axle Load) to RDSO Drawing No. WD-83069-S-01, Item No. 3, Alt-17.

Rubber spring pack 1000 kgm capacity

Twin Tower Air Dryer with pre-coalescer and final filter for AC Electric Locos...

Supply of 5 kVA, 25kV/240V , 50 Hz single phase oil filled L.T. Supply Auxiliary Transformer

Supply of 4 Wire DTMF

COUPLING ROD COMPLETE FOR HIGH REACH PANTOGRAPH TYPE.....

Malleable Cast Iron Pipe fittings - ELBOWs

Foldable safety rail for 2 Tier LHB

IOH Kit for SIL make Air dryer comprising of following items

D.C. circuit breaker of rating -1 pole, 6A, 250V As per CLW specification no.CLW/ES/3/0037.....

Lock for CBC for BOXNHL wagon to RDSO drawing

Nylon Cable Tie Self Locking

TV STAND

spare parts of kirloskar make-DG (SPIC).

TAPE PTFE THREAD SEALANT TAPE SIZE-12.5

Flexible Hose for Sand Ejector

Elastomer End Pad

Allin One PC (V2) (Q2)

Portable Single Operated Rectifier Type DC Arc Welding Set Suitablefor Manual Arc Welding Processasper IS4559 (Q2)