Loading
Loading…
Loading…
13,703 results • Latest
EXIDE Lead Acid Storage Batteries For Motor Vehicles of Capacity 60 Ah [75 Ah] Brand: EXIDE (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687713265968 dt.11/05/202
Monthly Basis Cab & Taxi Hiring Services - MUV; MUV 1666 Km Outstation 24X7 for TRD OHE BKSC for a period of 02 years or 24 Months; Outstation 24*7
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
Optical Fibre Splicing Machine (V2) asper TEC88090: 2012 (Q2)
Monthly Basis Cab & Taxi Hiring Services - Sedan; 2000 km x 320 hours; Outstation 24*7
Skid tongue Handle etc.
Monthly Basis Cab & Taxi Hiring Services - MUV; 1500 km x 320 hours; Outstation 24*7
"Upkeep & Maintenance of Running Room BANO, ORGA & GDBR which includes preparation & serving of subsidized meals to the occupants, cleaning of Running Rooms, Supply of Newspaper and Magazine by outside agencies for a period of 2 years (731 days)".
Supply and filling of Clean Dry Silica Sand, Free from Clay, Loams, Mica and other foreign material, As per Specification No. AAR M-916-51 to be used in all class of Electric locomotive at SRC & ADL Station Yd Round the Clock for a period of Two (02) years.
Modification of OHE due to provision of standard arrangement of OHE above the platform and Improvement of low implantation of OHE mast over Ranchi division.
Repair/Rehabilitation of Driver Seats in Crew friendly Cab of WAG-7 Locomotives.
Overhauling of fabricated Co-Co Bogie frame of WAG7 Electric locos during IOH schedule.
Replacement of composite insulator by porcelain insulator over Kharagpur Division (Phase-II)
Replacement of centre pivot assembly of WAP-4 Electric locomotives of ELS/SRC, South Eastern Railway.
Repair of 5400 KVA Transformer for Conventional electric locos.
Increase in length of line No. 1(CSR = 645 M) & Line No. 2(CSR =676 M) at Kita yard under jurisdiction of Dy.CE/CON./Ranchi
M.S.WELDING ELECTRODE CLASS -D, SIZE 4X450 MM TO RDSO SPEC. IRS -M- 28/2017, IS/AWS Spec . AWS A 5.5, AWS code E8018 W2 (HEAVY COATED).
Seamless Pipe in length of 6 mtrs., Nominal Bore 20 mm.
ISI marked Petrol operated Hand held Chain saw machine (Tree cutting machine) of 2 Stroke Engine with capacity 2.4 HP & 9000 RPM . Item to be supplied with warranty certificate.
Supply of ACSR Dog type conductor (100 sq mm).
R H Front Sliding Sash Assy BLW PT No-17049325 ALT- NIL
Running Contract for Tab/Cap. D-chiro-Inositol 13.8 mg + Myo-inositol 550 mg. along with Chromium and Vitamin D2/D3
BOLT (PEDESTAL CAP) S.E.RLY'S DRG.NO.SE/DL/BE-36 ALT-5.AS PER DRAWING.
Network Attached Storage (NAS) Device, As per the detailed description: Annexure-1 attached Brand: ASUSTOR or Similar
(1) Motor Protection Circuit Breaker (MPCB) 6 to 10 Amps, 690V AC, 50 Hz, 3-Pole type GV2P14 with Aux. contact block 2 NO (Normally open) as per CLW Specn. No. CLW/ES/3/0096 Alt.L or latest. Make: - Schneider or ABB. (2) Standard: IS/IEC 60947- 2, ICN-6 KA, 2P, 10A, DC, "C" curve Miniature Circuit Breaker. as per CLW Specn. No. CLW/ES/3/0096 Alt.L or latest.
Molykote 111 Silicon compound or Vessline or Silicon Valve and Packing Grease (OKS 1110) as per RDSO SMI No. RDSO/2016/EL/SMI/292 dated 27.06.2016 for overhauling of throttle valve of pantographs.
Pneumatic control unit (Valve-plate) for WBL 22.03 Schunk make Pantograph as per Schunk part No: 909010007500 or Drg. No: 1.V15-15750
CONSERVATOR TANK BOTTOM PLATE WITH GASKET AND HARDWARE FITTINGS
Annealed Copper Stranded Jumper Wire (160 Sq.mm.)
SET OF HARDWARE FOR GEAR CASE CONSISTING OF 09 ITEMS IN 648 ITEMS IN SET AS PER CLW'S DRG. NO. 1209-01.111-004 ( ALT.- 05 OR LATEST ) ( REF.- 3 OF CLW'S DRG. NO. 1209-01.111-001 OR LATEST ) ( DETAILS OF ITEMS AS PER ANNEXURE ENCLOSED ).
1" FLEXIBLE RE-ENFORCED RUBBER HOSE CONNECTION, 33" LONG FOR SANDING DEVICE TO CEE'S DRG. NO.- LOCO/3/SG/036 (MOD.-D) EXCLUDING REF. ITEM- 7 TO 10 FOR WAP4 & WAG7 LOCOS. (Source Ref.:- as per CLW approved source for CLW's Drg. No.- 0/3/65/116).
Running Contract for Normal Saline IV 0.9 % w/v, at least 500 ml.Glass Bottle.
SUPPLY ASSEMBLY TESTING AND COMMISSIONING OF HYDRAULIC PRESS MACHINE 50 TON 'C' TYPE ALONG WITH FIXTURE FOR PRESSING IN AND OUT OF CONTROL ARM AND TRACTION CENTRE METAL BONDED RUBBER BUSH OF VANDE BHARAT VERSION 1.0 & 2.0
Design, Manufacturing, Supply & Commissioning of Air Spring Test Rig Two Station type (Fully Computerized), Cap-200 KN With Manual operated Hydraulic Lifting Trolley. Specification as per Annexure attached
Supply, commissioning and installing of LPG gas pipeline
Channel Pins (Single groove for bonding Track Circuiting wires)
Supply, Installation, testing, commissioning & proving of EOT CRANE (5 TON) With Remote control etc.
DRAW HOOK WITH COLLAR AS PER ICF DRG. NO. EMU-2-1-011 ALT-G TO SPEC. NO. 61-B-36 Rev. 68-1 WITH AMENDMENT-1 OF OCT'2016 ALONG WITH LATEST AMENDMENT / ALTERATION IF ANY.
Supply, installation, commissioning & proving out of Coil Spring Load Deflection Testing Machine CAP-20T As per Specification.
Supply installation of Work Bench (500 kg Load Capacity) as per KPA drawing No. RECT/MECH/010723. Size : 2400mm X 900mm X 880mm
Compressed Oxygen Gas Drawing No. : - - - Matl.& Specn : IS: 309 (Rev. 5/2023), Grade:3.