Loading
Loading…
Loading…
5,139 results • Latest
SET OF MANGANESE STEEL PINS OF WAG7 LOCOS COMPRISING OF ---(i) HANGER LEVER PIN TO CLW's DRG. NO.-06/4/19/22 (ALT.-2) = 8 NOS. (ii) HANGER PIN TO CLW'S DRG. NO.-03/4/19/22 (ALT.-4) = 16 NOS. (MATERIAL TO SPEC.-IRS-R 65-78).
(1) Flag Signal Hand Woollen Green size: 50x45 cms to IS: 675/1973 (Variety No.- 1) for Bunting Cloth and IS: 187/1965 (Variety no.-2) for Long Cloth make up as appended -(a) Long cloth white to be hooked joined with cloth bunting to form a loop 50.80 mm plus minus 3.17 mm at one side the loop is to be closed at one end. (b) All the edges to be hemmed 3.175mm any edge having mills original selvedge need not be hemmed. (c) sewing cloth thread should not be interior to 20.6 chord and should match the cover of the chord. (d) Thread to give single thread strength of 99.225 gms. for any acting length of 0.61 mtrs. at the relative humidity of 65 percent. (e) The no. of stitching should not be less than 12 per 25.40 mm. (f) The stitch should be inserted 45 cms. inside (2) Flag Signal Hand Woollen Red size: 50x45 cms to IS: 675/1973 (Variety No.-1) for Bunting Cloth and IS:187/1965 (Variety no.-2) for Long Cloth make up as per (A) Long Cloth white to be hooked jointed with cloth bunting to form a loop 50.80 mm plus//minus 3.17 mm at one side the loop is to be closed at one end. (B) All the edges to be hemmed 3.175 mm any edge having mills original selvedge need not to be hemmed. (C) Sewing cloth thread should not be interior to 20.6 chord and should match the cover of the chord. (D) Thread to give single thread strength of 99.225 gms for any acting length of 0.61 mtrs. at the relative humidity of 65 percent. (E) The no. of stitching should not be less than 12 per 25.40 mm (F) The stitch should be inserted 45 cms inside. (3) Modified Flag Banner Red 1.5M x 0.75M of Terry Cotton cloth Red shade completed with white Lining in four sides as per IS:15853- 2009 (reaffirmed 2018).
Calibration Services - Mechanical, Electrical, Thermal, Fluid flow, Optical calibration, Radiological calibration; Dimension, Mass and Volume, Pressure and Vacuum, Force, Speed & Acceleration, Hardness & impact, Density and Viscosity, Voltage, Curren..
Computer Paper 15 inch x 12 inch 3Part.
Leather Washer for Air Brake Cylinder-355mm. Drawing No.:- RDSo's Drawing No. WD-92051-S-09, Alt. 02, Item No. 11. Material and Specification :- Conforming to RDSO's Spec. No. 02-ABR-02, Amend. No. 4 of Sept. 2016 with Appendix B.
Outer Bolster Suspension Spring for CASNUB 22HS (MOD 1) Bogie etc