South Western Railway Tender Results

HAND SANITIZER WITH PUMP -500 ML CONTAINS ETHANOL (95%) 80% V/V OR ISOPROPYL ALOCHOL 75% V/V, GLYCEROL 1.45% V/V AND HYDROGEN PEROXIDE 0.125% V/V

SODIUM HYPOCHLORITE Solution 5% 5L CAN

COTTON CREPE BANDAGE WITH FAST EDGES 10 CM X 4MTRS.

EACH ROLLER BANDAGE SIZES 15CM X 10MTRS ( MATERIAL 100% COTTON, PACKING INDIVIDUALLY WRAPPED IN WHITE PAPER OR SIMILAR

LIQUID MICROBICIDAL HAND WASH SOLUTION IN 500ML BOTTLE WITH PUMP (CONTAINS 0.5% W/V TRICLOSAN USP OR CHLORHEXIDINE 4%, SKIN EMOLLIENTS, SOAP BASE, PERFUME

BLACK BRAIDED SILK STERILE WITH EYE LESS NEEDLE suture,size1-0 SUTURES (5037) PACK OF 12s- similar to 5037 ( 01 BOX=12 Nos)

ECG CLIPS, SET OF 4

ABSORBABLE SURGICAL SUTURE USP SYNTHETIC COATED BRAIDED POLYGLYCOLIC ACID SUTURES 1/2 CIRCLE ROUND BODY 40 MM, LENGTH 90CM SIZE-1-0 (CODE 2346) PACK OF 12'S (01 BOX=12 Nos)

LARYNGOSCOPE BULB LED

SLIT BLADES DISPOSABLE 2.8 MM ( KERATOME ) DISPOSABLE - BLADE IN PLASTIC HANDLE ,DIAMOND SHAPE BLADE WITH THIN STEM, V SHAPED UPPER PART OF BLADE SHOULD BE SHARP BOTH SIDES, MINIMUM 10 DEGREE ANNGULATION BETWEEN UPPER AND LOWER PART OF DIAMOND BLADE . MAXIMUM DIAMETER OF BLADE IS 2.8MM , ANGLE BETWEEN STEM AND BLADE IS 90 DEGREE , BLADE SHOULD BE STRONG NOT BRITTLE OR BENDING TYPE.

CRESCENT BLADE 2.6MM BEVEL UP ANGLED CRESCENT KNIFE DISPOSABLE CRESCENT BLADE 2.6MM BEVEL UP- BLADE IN PLASTIC HANDLE WITH THIN STEM AND CUTTING PART, CUTTING PART BEVEL UP DIAMOND SHAPED WITH ROUNDED TIP, ROUNDED TIP SHOULD BE SHARP AT ALL THREE SIDES. LOWER PART OF BLADE SHOULD BE BLUNT. MAXIMUM DIAMETER OF BLADE IS 2.6 MM. SURFACE SMOOTH, PREFERABLY MATTE FINISH, ANGULATION BETWEEN BEVEL AND BLADE SHOULD BE 120 DEGREE OR MORE. BLADE SHOULD BE STRONG NOT BRITTLE OR BENDING TYPE.

TYPE V HIGH GLOSSY THERMAL PRINT MEDIA FOR USG, EACH ROLL MEASURING 110MM X 18M, COMPATIBLE WITH Sony Thermal Digital Graphic Printer UP UP- D898MD

DISPOSABLE SPINAL NEEDLE ASSORTED SIZES- 22, 23, 24, 25, 26 & 27 (to be supplied as per sizes as per consignee requirement)

SEAL OIL B65 X 90 X 10. FOR RR20100CGM COMPRESSOR. AS PER ELGI PART NO. 000439170. QTY.-02 NOS./SET

Heavy duty polyester (Nylon) webbing sling (AS PER ATTACHED POHOTO )with four leg bridle belt oblong master link at one end and eye hooks safety latch on other end. To be supplied with load test certificates. The specifications are (1) Capacity: 2 ton/each belt (2) Length : 3.6 mts for 2 Nos and 3.4 mts for another 2 Nos. (3) Width : 50mm (4) ply: 4 ply (5) Warranty : 12 months from received of items.

Clevis uncoupling to EMD Part No.8024774 Alt D.

Ultra-High Pressure Hand Pumps, : Portable Hand pump for pinion extraction 40,000 psi (2800 bar), individual manifold release knob. Fully Equivalent to ENARPAC P- 11Series, Model P2282, Light weight and compact design, nylon reservoir and nylon encapsulated aluminum pump, Non-conductive fiberglass handle, Internal pressure relief valve for overload protection As per Specification attached Annexure-I and Accessories Annexure-II attached

EP VALVE ASSLY OF VCB AAL MAKE ALONG WITH SCREWS, WASHERS & 'O' RINGS AS PER AAL PT NO. 4300007100/44 CONSISTS OF FOLLOWING 05 ITEMS IN 11 Nos. (1) EP Valve Assy. - 01 Nos. Part No. 4300005500. (2) Allen Head screw - 04 Nos. Part No. 9ADA187-28. (3) Elastic Washer - 04 Nos. Part No. 9AVA330-11. (4) O-Ring dia. 2.5 - 01 Nos. Part No. 4306057577. (5) O-Ring - 01 Nos. Part No. HSBA432095P0026.

Cable size AWG#14, to EMD Part/ DLW Drawing No. 8470754 Rev D, DLW Part No. 18330060 as per DLW Drg. No. 9094883 Alt Lb or latest, DLW Part No. 18331130 Material to be supplied in continuous spool

Coupler 5 Pin Temperature Sensor Coupler as per ABB part number HBTB415399P0022 as per spec. No. CLW/ES/3/0124 ALT-O or latest

PLASTIC BAGS (POLYTHENE TRANSPARENT/ PACKING BAGS) OF SIZE 12" W x 14" L (Thickness 120micron). For use in sand box for covering sand cap in HHP Locomotives.

Inlet Valve Assembly

ELEMENT AIR FILTER

kgw Burettes Class A (subdivided into Classes A and AS) for the higher, kgw Burettes Class A (subdivided into Classes A and AS) for the higher grade with nominal capacity of 50ml (with subdivision 0.10ml)

Waterproof Boot Boot Combat Rubber In Pairsasper Defence Specification (Q3)

Set of compensating plate for WAP7/WAG9 locos

STRING NYLON

Exhaust Air Valve

WEARING PLATE AS PER DRG NO. LWSCWAC / EOG-6-1-012 ITEM NO 11 GRADE AISI 304 Firm offered make: SELF MAKE

Steel packing piece 20 mm to MYS drg. no. BRS/02/0035 to material specification IS 2062/2011 E250 C, Amndt 1 of 2012, (Reviewed in 2021) Firm offered make: PEW

Neoprene Rubber O Ring as per RDSO STR No: RDSO STR No: RDSO/CG/S/23002 REV- 01 issued on July- 2025, (Drawing as per- RDSO/CG/S/23002 REV-01) Material should supply be supplied with a NABL certificat

RFID TAG AS PER GS1 STANDARDS AND AS PER THE CRIS SPECIFICATION NO.2016/CRIS/NDLS-ITPI/ WS-C/ POLICY/ RFID/ 0101/ PT-1 (V4,1) OR LATEST. Firm offered make: M-TECH

Welding leather leg guard with fastened using Velcro. Make: MESSERS Pc No: 80830721 or Make: EWAC Pc No: PPEWLG or Make: KEEAN Pc No:KMAK9005-18 Note: To be supplied by OEM/OEM authorized dealers only

Heating Element 230V AC 50hz, 3KW

Water boiler of 30 ltrs 3 KW capacity

Switch plate assembly

Class II Graduated compression stockings to improve the venous circulation and relieve the symptoms of varicose vein having LYCRA 31%, POLYAMIDE 27%, MICROFIBER 42%. Should be available in BELOW KNEE & ABOVE KNEE. SILICONE BANDS to prevent rolling down in ABOVE KNEE STOCKINGS.SIZES: - XS, S, M, L, XL, XXL.

Set of Switch plate assemblies

Brake gear Pin No. 1

Copperalloy Taps/Stop Valves (V2) Conformingto IS8931 (Q3)

Multifunction Machine Printer

DRILL TWIST PARALLEL SHANK JOBBER SERIES SIZE 7.2MM TO IS:5101/1991

Set of Hex Head Screw

PIN SPLIT COTTER STEE

Power cable.

Supply of Modem.

Digital Platform Double Sided Clock with GPS synchronization

Supply of 12 V, 7Ah sealed maintenance free lead acid battery.

Portable Hand operated Gearless Pulling and Lifting Machine

Ungalvanized steel wire rope 14 mm Dia