Loading
Loading…
Loading…
10,318 results • Latest
BUPIVACAINE 0.25 % W/V OF 20 ML INJ
Renolit HLT 2 Grease for overhauling of DV. Accepted make: FUCHS. Procurement to be made from OEM/ authorised sources.
READY TO USE STERILE COMBINE DRESSING PAD OF ABSORBENT COTTON IN AN ABSORBENT OVERWRAP 20CM X 10 CM
ESMARCH TOURNIQUET 2 INCH one end should have thick thread to tie the tourniquet, should have excellent stretch recovery
BSS BRACKET ON BOGIE FRAME Drawing No.:- T- 0-3-622, alt. (s) & (10)
(1)TACROLIMUS 1MG TAB/CAP (2)TACROLIMUS 0.5MG TAB/CAP (3)TACROLIMUS 0.25 MG TAB/CAP
MOMETAZONE FUROATE 50MCG NASAL SPRAY, 100 MDI
CALCITONIN NASAL SOLUTION/SPRAY NOT LESS THAN 3ML
TOP BUSH FOR CENTRE PIVOT of 1400/1600 HHP DEMU as per Drawing: EMU/M-0-6- 005 ALT "l" ITEM 2
LOOK OUT GLASS FOR TOWER WAGON AS PER ICF DRG.NO. DMU/DPC 7-9-0- 704,COL.-I Alt-G. SPECIFICATION: ICF/MD/SPEC-159 (Rev-01).
POH KIT FOR PEAV TO RDSO DRG. NO.SK-97029, ALT'3' CONSISTING OF ITEM NOS. 2,4,5,6,7,8,9 AND 23 AND CONFIRMING TO RDSO SPEC. NO.02-ABR-02, APPENDIX-J.
Straight PG Metal Thread End Fitting Thread Size: PG29 Fits to Conduit Size: NW29, with Hexagonal PG Lock Nut made of Nickel Plated Brass, with suitable O-Ring and Washer as per Annexure-A, Table A-2, S. No. 6 of RDSO Specification No: RDSO/PE/SPEC/AC-0138-2009, REV. 1 or Latest Note: Item to be supplied in assembled condition.
Supply of spares for slip gauges consisting of range 3.0mm, 3.1mm,3.2mm, upto 5mm(in incremental of 0.1mm) total 21nos, along with calibration certificate. Width 10 to 20 mm, Length 200 mm, Material: EN19, Hardness 55-60 HRC, All gauge surfaces to be ground, Sharp corner to be removed. Note: 1No. sample to be approved before bulk supply.
Supply of HP 738 DesignJet Ink colour Cartridge. Models: HP 738 130-ml Cyan DesignJet Ink (Part Number: 498N5A)-01 No, HP 738 130-ml Magenta DesignJet Ink (Part Number: 498N6A)-01 No, HP 738 130-ml Yellow DesignJet Ink (Part Number: 498N7A)-01 No and Model: HP 738B 130-ml Black DesignJet Ink (Part Number: 498P2A)03 Nos
SPRAY PAINT RAL SHADE 7035-OF94 COVERING CAPACITY 11.4-132 SQYRE METER/LTR DFT-40-45 MICRON PER COAT TOUCH DRY 01 HRS FINISH GLOSSY SOLUABLE WITH PU THINNER HIGH GRADE ONLY.
Stainless steel Hex head screw for wire rope of under slung water tanks, Size- M10x30 as per Drg no. LIHWSS02, IS:1364(PT-2)1992/2002 TO IS:1367(PT-14 )84,A2-70
Tray (For Transformer) as per DRGNo. UBL/EL/PP/0126-1A
Non Modular Piano Type Domestic Electrical Sockets ISI Marked To IS1293 (Q2)
Inverter Based LED Street Light (V2) (Q2)
Live Working Glovesof Insulating Material (V2) ISImarkedto IS13774 (Q2)
Electric Ceiling Fan (V4) ISIMarkedto IS374 (Q2)
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
LED Luminaire For Floodlight Conforming To IS10322 (Part5/Section5) (V3) (Under BISScheme-II) (Q2)
Polyethylene Pipesfor Water Supplyconformingto IS4984 (Q3)
XLPE Cablefor Working Voltageuptoand Including1.1 KV Marked To IS7098 (Part1) (Q2)
Halobetasol Propionate 0.05% w/w not less than 15 gm Cream(ACCEPTATED MAKE/BRAND-Lyka Labs/ Halotop Cream -30gm)
STEEL FIT--STEEL FIT INTERIORS High-back Revolving Chair of Adjustable height with Wheels Brand: STEEL FIT--STEEL FIT INTERIORS (Detailed Description/Specification as per Product # 1 of GeM Contract N
SCIENTIFIC CALCULATOR MAKE-CASIO fx-99IES Plus Accepted Brand: CASIO fx-99IES Plus
Scotch Block as per RDSO Drg. No. CG-12026 (all items except Item No. 8, 9, 10 & 11 of Drg No.CG-12026 as per Option B, clause No. 3.2 of RDSO Specification ) and confirming to RDSO Specification RDS
Modular Plate 8 Module, Frame Plate with Matching Cover Plate. Horizontal Brand: POWERWIN (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687706199630 dt.30/07/2026)
Wooden Wedges for BG Rolling Stock according to Drg.no.F(C&W)-1630, alt.nil dated 24.06.24. Material and Specification as per drawing. Make/Brand : OEM
DEMU 1600 HP IV coupler as per Harting part no 84200000017137 Jumper Plug Type E assy - 8.7 M. Make Harting only.
DEMU 1600 HP IV coupler as per Harting part no 84200000017134 Jumper Plug Type B assy - 8.7 M. Make Harting only.
DEMU 1600 HP IV coupler as per Harting part no 84200000017136 Jumper Plug Type D assy - 8.7 M. Make Harting only.
DEMU 1600 HP IV coupler as per Harting part no 84200000017135 Jumper Plug Type C assy - 8.7 M. Make Harting only.
Item Description: Supply of Double suspension clamp complete assembly with LOCK PLATE, PACKING SADDLE AND FASTNERS conforming to RDSO drg no RE/33/P/1171 Rev-f with id no.1171,RE/33/P/1172 Rev-c with
BLDC type Electrical 400 mm Wall mounting fans, 5 Star rated, Oscillating type Sweep 400 mm, Sophisticated, elegant looks, plastic blades, pull'cords for speed regulating/remote controlling. Bracket mounting, semi rigid, non capacitor type, white colour blades. It shall be suitable to work on 230V, AC, 50HZ, AC single phase supply, rated power 28 W-35W, IP 21, motor type AC with copper winding and PCB controller board, regulator class-I speed control by remote/ mechanism-pull cords or remote based control speed steps 0 to 5, length of power cord- 2 mtrs rated air delivered 65 cu.mt/min. or above, rated speed 1000 to 1500 rpm. IS;555 or latest acceptable makes: Orient, Havells, Atomberg, Philips, Crompton etc.. it should be guaranteed as per the IRS conditions.
VFD COMPRESSOR UNIT 7.6 KVA, item code SP675UV2101041 as per RDSO specification No. RDSO/PE/SPEC/EMU/0196-2019 (Rev.0) Make : MEDHA
VFD EMERGENCY INV.UNIT 1.6KVA item code SP675UV2101042 as per RDSO specification No.RDSO/PE/SPEC/EMU/0196-2019 (Rev.0) Make " MEDHA
Supply and installation of Steel Bedside Locker with locking arrangement for safe storage of personal belongings and valuables of Loco Pilots and running staff in the Running Room as per attached specification
Air outlet net for TM Type 6FRA6068 as per CLW DRG.NO.2TWD.096.078 ALT-3 or latest with the following two conditions: (1) The Square punch to be 12MM X 12MM as against 11MM X 11MM square (2) The thickness of the sheet to be 2.5MM as against 1.6MM Note: 2 Nos. samples to be got approved by consignee before effective bulk supply
Prevailing torque type hexagon nut size M16x1.5 mm with non metallic insert