Southern Railway Tender Results

O RUBBER RING 32MM

Emergency Handle and Secondary Handle.

Supply of customized loco shed material, fire extinguisher identification tag

Supply of Nitrogen Cylinder.

High flow pressure limiting valve with base plate

1) BUPIVACAINE 0.5 % INJ 20 ML VIAL & 2) BUPIVACAINE 0.5 % INJ 4 ML AMP

VOLTAGE REGULATING PANEL COMPLETE TO RDS

Overhauling kit

5 Tonne Load Capacity , 8 MM ALLOY STEEL [5 Tonne Load Capacity , 8 MM ALLOY STEEL ,GR. 80 CHAIN WITH KEPRO MAKE CHAIN CONNECTOR 20 FEET MAKE: Miraclin enterprises or Equivalent]

POH KIT FOR LOAD SENSING DEVICE-III

SPACER FOR TM SUPPORT PLATE(TYPE 6FRA6068) OF 3- PHASE LOCOS

LED frequency meter

High Tensile Transition CB Coupler for A [High Tensile Transition CB Coupler for AC Locos to RDSO Spec No 56-BD-07 with Amendment No. 1 of September 2010 and Amendment No. 2 of September 2016 and to RDSO Drg. No SKDL 3430 Alt 8 except item No 24 to 47, and to Part Drg. Nos SK.DL 62724 Alt 28, SKDL 3119, SKDL 2496 Alt 6, SK 69508 Alt 4, SKDL 2494 Alt 17, SKDL 2495 Alt 12 and SKDL 890 Alt 4. Item No 18 (High Capacity draft- gear) to STR 49-BD-08 of June 08 with Amendment No. 1 of September 2016. Item no 19 (striker block) as per CLW drg No 05/3/57/31 Alt 3 for modified striker casting, Item 20 suspension hook as per RDSO Drg No SKDL 3430 Alt 8 are to be supplied in loose condition Each set consisting of one No. of each item. Note: 1) It should be ensured that 100% of knuckle (Item 2 of RDSO drg no SKDL-3430 Alt-8) should be checked to pass 10A Contour Gauge. 2) Firm who are approved for High Tensile CBC have to arrange / purchase the Components / High capacity Draft gear from RDSO/BLW approved sources only, if they are not approved for such components. 3) MPT and DPT to be done for 100% quantity for any cracks during acceptance test, in line with RDSO letter no EL/3.2.119 (CBC) dated 27.11.2019.`]

RS resistor field weakening for 3 shunti [RS resistor field weakening for 3 shunting notches with punched grid elements for WAG7 locomotives as per CLW specn. No. CLW/ES/R-39 Alt-D. Mounting details as per Sketch no. CLW/ES/SK14/R-39 Alt-D. Each set consisting for two trays.]

High performance Anti-Corrosive Epoxy coating,

High voltage bushing

HAND BRAKE PULL ROD FOR BOXN WAGON

Electrolytic tinned copper ring tongue t

PNEUMATIC RUBBER HOSE TO WITHSTAND AIR PRESSURE 10 KG/SQ.CM,

Tie Rod for BOXNHL (BMBS) Wagon

Overhauling Kit for Pressure Limiting Valve

Horn and axle box side liner

KERODEX 71

HEXANE FRACTION FROM PETROLEUM

HEX HEAD BOLT M20 X120-10.9(HT)

set of spares for diesel fork lift

Set of Quick Coupling for main transformer of 3 Ph. Locomotives

11/4" Ball type isolating cock

Brake hanger lever assembly (LH)

MOTOR CONTACTOR WITH MAGNET VALVE AND INTER LOCK

DOOR LOCK COMPLETE.

EQUALISER SPRING SEAT FOR CO-CO BOGIE of WAG 5 locos

Paint "Opaline Green"

TAURINE 500 MG + ACETYLCYSTEINE 150 MG TAB

DTBP BLOCK CUSHION FOR TRANSVERSE LOWER BERTH OF SCN COACHES

DTBP BLOCK CUSHION FOR TRANSVERSE MIDDLE, UPPER AND SIDE UPPER BERTH OF III TIER AC COACHES

NON-FLAMMABLE SOLVENT

Slack adjuster assembly (upper)

BKT. For pull rod

Sand Pipe

SUPPLY OF BRAKE CHOPPER RESISTOR UNIT.

Modified Steel Lid for Oil filter assembly

Emergency socket box

Side Middle Coping (Door way) &Side Middle Crib Angle (Inner)

Fevicol

Manual Metal Arc Welding Electrode, Class M-5

Kit for 355 mm Air brake Cylinder.

Horn Signalling PIEZO Electronic

BEARING ASSEMBLY, Roller

SOLDER CORED RESIN FILLED