Southern Railway Tender Results

LED Light fitting

1.Supply, fitment and prove out of set of spares consisting of 03 items for Atlas Copco make air compressor

Supply and Fitment of Must Change Items in FDS System

SAND BOX COVER GASKET(SEAL PAD GASKET)

HARD WOODEN WEDGE

SUPPLY OF SET OF SPARE PARTS FOR COLD WATER HIGH PRESSURE WASHER

GASKET, Valve seat to head, to EMD Part No. 8063286/GD Part No.25L6 and toDLW Part No.17380236 for WDP4/WDG4 Locos.

Procurement of Transient Voltage Suppressor,

Procurement of Handle for MR Equaliser & BC Equaliser,

Procurement of Breaker,MCCB, 200 A, 3 pole,

12 - Inch Industrial Gong Bell

Soap Dish

Wooden saw dust

DIODE, Silicon - Series - 70 Rev. Volts

BOARD,Terminal TB33A,B to EMD Part No. 8

4- Core Energy Cable (3 Mtrs) (Make/Brand:- PRAG POLYMERS)

MS BLACK HEX. BOLT WITH THREAD M20x 90MM long with Property class 4.8 for Bolt & 5 for Nut. IS.1363-2023, PART.1 &IS: 1363-2018 PART.3

PERIPHERAL ANGIO BALLOON - 0.018" WIRE COMPATIBLE,SHAFT LENGTH 100CNM SUITABLE FOR USE...PERIPHERAL ANGIO BALLOON - 0.035" WIRE COMPATIBLE LOW PROFILE, SHAFT NON-COMPLIANT SCRATCH RESISTANT SHAFT LENGTH 100CM OR GREATER, PERIPHERAL ANGIOPLASTY BALLOON CATHETER WITH SPECIAL COATING TO PROVIDE CONTROLLED ELUTION OF ANTI PROLIFERATIVE DRUG, PTCA BALLOON LONG: 0.014" WIRE COMPATIBLE RAPID EXCHANGE, PTCA BALLOON LONG DILATATION CATHETER,ONE MM IN DIAMETER, AND FIVE MM IN LENGTH AND SHAFT LENGTH OF 145CM OR MORE, PERIPHERAL ANGIO BALLOON-0.035" WIRE COMPATIBLE NON-COMPLIANT VERY HIGH BURST PRESSURES 20ATOMS OR MORE, PERIPHERAL ANGIOBLASTY BALLOONS OF VARIOUS SIZES, PTCA 0.014" WIRE COMPATIBLE RAPID EXCHANGE DRUG ELUTING BALLOON OF VARIOUS IAMETER AND LENGTH, PTCA 0.014 INCH CORONARY GUIDE WIRE WITH 4CM HYDROPHOBIC COATING, 4CM SPRING COIL LENGTH, 4CM RADIO OPAQUE SEGMENT, COMPOSITE CORE TECHNOLOGY, 180CM LENGTH., PERIPHERAL CATHETER- HYDROPHILIC -SIZE 5FR.

POH KIT FOR ESCORTS MAKE

Pneumatic Operated Impact Press 3.5 Ton

One set of spare consisting of 02 items for Kirloskar make Screw compressor Model: KES 22-10.

1.Straight connector with nut 2.SOUNDER BEACON

MAIN CONTROL UNIT - DISPLAY CARD

INLINE FILTER

DC-DC POWER CONVERTOR

1.PUBLIC ANNOUNCEMENT MODULE

1.MAIN CONTROL UNIT -PROTECTION CARD 2.Clamp for Nitrogen cylinder

1.Supply of protection card 2.DISPLAY CARD for VESDA

1.LHD Connector 2.Male stud connector G3/8" 3.SMOKE AND HEAT DETECTOR SAFETY COVER 4.PRE- ALARM INDICATION BUZZER

1.End plug stainless steel G3/8" V4A elastic sealing 2. Nozzle clamping ring

1. BRAKE MODULE (52266177)

SUPPLY OF Eyelet for track Circuit Bonding

SUPPLY OF Modified Channel Bond Pin for Track Lead Wire and Track Bonding

One set of Torque Wrench and its adapters

Set of Circlip, Split pin and dowel pin

SUPPLY OF Brass Brazing rod of diameter 3.15mm confirming to IS-1278/SC6

SUPPLY OF Galvanised cable clamp assembly for wider prestressed concrete sleeper

SET OF PROTECTION SLEEVE

LUBRICATING COATING

Supply of SMPS complying to RDSO

Surgical Consumable: INSULATED ECHOGENIC NERVE BLOCK NEEDLE, CONTINUOUS EPIDURAL ANESTHESIA FILTER SET

Supply of 110V/40AH LEAD ACID BATTERY SET WITH ELECTROLYTE

PVC chlorine jackets for Bio Toilet

POH kit for ESCORTS make

Supply of bronze components consists of 4 items for connection and cocks for water gauge of X class locomotives

SUPPLY OF HIGH PERFORMANCE ANTI CORROSION EPOXY COATING (TWO PACK) FINISHING PAINT COLOUR: GREEN

HBA1C CONTROL HIGH SOLUTION [SRPHC82613075-HBA1C CONTROL HIGH SOLUTION 0.5ML VIAL] / HBA1C CONTROL LOW SOLUTION [SRPHC82613080-HBA1C CONTROL LOW SOLUTION 0.5ML VIAL] .

HOLLOW FIBRE ARTIFICIAL KIDNEY SIZE:1.3

LCP RADIAL HEAD PLATE TITANIUM RIM 2,3,4,5 HOLES AND NECK 2,3,4 HOLES WITH 2.4 AND 2.7MM LOCKING SCREWS OF APPROPRIATE SIZES

HINGED KNEE REPLACEMENT PROSTHESIS