Loading
Loading…
Loading…
224 results • Latest
Canned motor pump model BA32-125/2.2H/SC [Canned motor pump model BA32- 125/2.2H/SC/02,2.2 Kw,15 cu.meter/hr at 20M as per M/s. Flowwell Drg. No. CMP- 11501/M of M/s. Flowwell make or in ABB/KEC Makes Suitable for M/s. Medha make IGBT Converter]
HAND OPERATED CHAIN PULLEY BLOCK TO MODE [HAND OPERATED CHAIN PULLEY BLOCK TO MODEL NO. C SERIES 2TON 5MTRS (2 TONCAPACITY, LIFT 5 METERS) AS PER IS-3832 LATEST, WITH FOLLOWING GeM GOLDEN PAREMETERS. 1) ISI MARKED: YES. 2) STEEL SHAFT-GROUND (MN/m2): 17. 3) SAFE WORKING LOAD (% OF WORKING LOAD LIMIT): 100. 4) MECHANISM CLASS: M2. 5) AVERAGE LIFE (TOTAL LIFE Hr): > 40000. 6) STEEL SHAFT-NOT GROUND (MN/m2). 14. 7) MATERIAL: AS PER CLAUSES OF 6 OF IS: 3268 LATEST. 8) CONSTRUCTION: AS PERCLAUSES OF 5 OF IS:3268 LATEST. 9) AVERAGE LIFE (RUNNING (Hr/DAY): > 6. 10) RATING, TEST ANDMARKING: AS PER IS:3268 LATEST. 11) PLAIN BEARING MATERIAL: BRONZE. 12) NORMINAL SIZE OF LINK: 5 MM. 13) CONFIRMITY TO INDIAN STANDARD: IS:3832 LATEST. 14) TIME DURATION FOR REPAIRING / REPLACE THE DEFECT DURING WARRANTY: WITHIN ONE WEEK. 15)AVAILABILITY OF TEST REPORT FROM CENTRAL GOVT/NABL/LLAC ACCREDITED LAB TO PROVE]
Supply & Installation of Motor current s [Supply & Installation of Motor current signature analysis equipment, Technical Specification as per Annexure attached.]
MOTOR GP-ELE, Part No.: 4351240 for DT/E [MOTOR GP-ELE, Part No.: 4351240 for DT/Exp, New FRM machines. Make- CATERPILLAR HSN- 85114000. ]
HEX HEAD SCREW (MS) M6 x 20mm. TO IS:1364/2002 (PART-2) P.C-4.6 ZINC PLATED.
Modified sander pipe arrangement for WAP [Modified sander pipe arrangement for WAP1/4 Loco as per RDSO Drg No SKEL-4562 Alt. 0 Ref; 1 to 13. (Note:-Item to ref. No 6,8,9,11&13 should be with Nut M 14 instead of M 12 as indicated in drawing). One set consists of 13 items 72 Nos.]
PLASTIC POLYTHENE PLAIN SHEET SIZE 19* [ PLASTIC POLYTHENE PLAIN SHEET SIZE 19*21 feet]
"Auxillary contacts and supports assembly to CLW Drg.No.3TWD.112.090 Sheet no.1 Alt-7 and Part Drg.No.as per 4 TWD 112.090 ALT-5 (1 to 18 Sheets)"
Supply & Installation of Transformer oil [Supply & Installation of Transformer oil filtration plant 5000 LPH capacity for 3-phase locomotives as per specification given in Annexure A]
HYDRAULIC VALVE, for CSM, DUO machines [HYDRAULIC VALVE, for CSM, DUO machines. Equivalent to PLASSER Part No.: HY511.07, VELJAN-DENISON PART No. R4-V06-53F-30A1, Part Make: PLASSER/REXROTH/VELJAN-DENISON, NOTE: Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. NOTE: Authorized dealer certificate to be submitted with supply. ]
PLAIN RUBBER SHEET, Rubber Sheet Constru [PLAIN RUBBER SHEET, Rubber Sheet Construction.: 150 mm RS X 10 mm, Total thickness.: 10 mm, Base Material.: NR, Rubber Sheet Type.: Open End, Belt Length.: 10 Mtrs for BCM, FRM machine. Part Make: PLASSER OR EQUIVALENT. NOTE: Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. ]
Supply, Installation, commissioning & de [Supply, Installation, commissioning & demonstration of Digital Ultrasonic cleaner of capacity 5.3 liters max. for cleaning Nickel-Chrome test panel and other equipment parts after testing. Detailed specification as per Annexure- A.]
Lubricating oil for vacuum pump Grade- V [Lubricating oil for vacuum pump Grade- VM-4 of M/s Indian Oil or similar grade.]
POWER CABLE COMPLETE WITH PRESS PLATE AN [POWER CABLE COMPLETE WITH PRESS PLATE AND CABLE CLEAT FOR TRACTION MOTOR TYPE 6FRA 6068 AS PER DRAWING NO.-TRS/GMO/TM/G-9/018. ONE SET CONSISTING OF- (1) ITEM NO. 3, CABLE CLEAT, QTY = 01 NO., (2) ITEM NO. 4, PRESS PLATE, QTY= 01 NO., AND 3) ITEM NO. 5, RUBBER BUSH, QTY = 6 NOS. ONE SET CONSISTS OF 03 ITEMS, 08 NOS. (NOTE: - ONE SET SAMPLE GOT TO BE APPROVED BEFORE BULK SUPPLY).]
PVC Board 8-inch x 10 inch (Thickness: 3 [PVC Board 8-inch x 10 inch (Thickness: 3 mm to 5 mm) with Mica Top (Thickness: 3 mm) complete in all respect with brass screw 04 Nos Make/Brand: - Press fit, Anchor, Presto plast, &Vinay only. As per IS 14772:2000]
GEAR CASE MOUNTING LUG BUSH FOR TRACTION MOTOR TYPE HS 15250A.A- COLLER THICKNESS=9.00+0.20MM-0.00MM,B-LENGTH=42.00+0.5MM-0.00MM. ELW/BSL/WAG-5/4/150.054 Nos.
Supply of Original HP 152A Black Toner f [Supply of Original HP 152A Black Toner for HP Laserjet Printer.]
Set of Anti Vibration rubber pad for MVM [Set of Anti Vibration rubber pad for MVMT foundation and duct for MVMT as per Drg No-ELS/VSKP/2004/5. One set consists of 2 items 3 Nos. Material is to be procured from CLW approved sources only. CLW item ID-2101221.One sample to be got approved before effecting bulk supply. ]
Design, Development, Supply, Installatio [Design, Development, Supply, Installation (Including civil work such as machine foundation work etc.) and commissioning of Hydraulic Sandwich Mounting Testing Machine along with Digital Load indicator and Digital length measurement device and computerized load deflection graph plotting facility. (Refer technical specification attached herewith).]
BEARING For BRM R02H, BCM machines, Equ [BEARING For BRM R02H, BCM machines, Equivalent to Plasser Part No.: 6306-2RS, Make- PLASSER OR EQUIVALENT, HSN Code.: 8482 ]
PNEUMATIC HOSE R6 1/4" Part No.: 1/4" R [PNEUMATIC HOSE R6 1/4" Part No.: 1/4" R6 HOSE WORKING PRESSURE-28 BAR. Specification: Air/Water/Hydraulic Hose Pipe R6 1/4" Dash Size R6-4 ID: 6.4 mm, OD: 12.7 mm Max working pressure 28 Bar. For Track machines. Part Make: PLASSER/PIX/DUNLOP/PARKER OR EQUIVALENT. ]
BALLBRG GREAS CRTG For FRM Machines. [BALLBRG GREAS CRTG For FRM Machines. Part No: 4540291, Make: CATERPILLAR, BO Sr. No.: 01, HSN Code: 27101990, ]
SENSOR GP, Part No.: 4309449: AA for DT/ [SENSOR GP, Part No.: 4309449: AA for DT/Exp, FRM machines as mentioned below. Part Make: CATERPILLAR. HSN- 90261090. AMC No.: 192. ]
SENSOR GP-PR, for DT/Exp, FRM machines P [SENSOR GP-PR, for DT/Exp, FRM machines Part No.: 2746719: AA, Part Make: CATERPILLAR, HSN- 90262000, AMC No.: 204, ]
PVC Board 7 inch x 4 inch (Thickness : 3 [PVC Board 7 inch x 4 inch (Thickness : 3 mm to 5 mm) with Mica Top (Thickness : 3 mm) complete in all respect with brass screw 04 Nos Make/Brand:- Press fit, Anchor, Presto plast , &Vinay only. As per IS 14772:2000 ]
SLEEVE FOR CENTRE PIVOT PIN UNMODIFIED AS PER RDSO SKEL - 4697 ITEM NO.11 TO SPECIFICATION STEEL CL-3 AS PER IS:1875 (1992), SLEEVE FOR WAG-7 LOCOMOTIVES AS PER RDSO MODIFICATION SHEET NO. ELRS/MS/0338/REV-0. (TO BE PROCURED FROM CLW APPROVED SOURCES ONLY).
Black Magnetic ink spray can for MPT as [Black Magnetic ink spray can for MPT as per specification RDSO/M&C/NDT/109/2007 (Rev-2) October 2020 and as per ASTM- E-709 & IS : 6410. Firm must provide NABL accredit test certificate along with the material. Note - One quantity should be got approved before bulk supply.]
Self bonding (Amalgamating) insulating t [Self bonding (Amalgamating) insulating tape, size:38mm width x 0.7mm thick x 4.5meters roll for cable head termination system of Loco /EMU as per RDSO Specn. No/ELRS/SPEC/BL/0003 (Rev-1) and amend 1. Dec -2008. Make: Scotch 23 of M/s. 3M Ltd., or P966 of M/s. Grindwell Norton Ltd or Z943 Strippex AVL of M/s. Stanvac or Scapa 2517 of M/s. Scapa Tapes India or equivalent.]
Yoke for High Tensile CBC, to Drawing/Sp [Yoke for High Tensile CBC, to Drawing/Specification RDSO Spec. No. WD-70-BD-10 (Rev-4), RDSO Drg. No. SK- 62724, Alt. No. 31, Item No. 3]
Synthetic Rubber Nitrile Bonded Cork Com [Synthetic Rubber Nitrile Bonded Cork Composition sheet GR. RC70-A Type C fine granules size 900+/- 15 mm x 600 +/- 10mm x6.35 mm thick conforming to IS 4253 (Part 2): 2008 Amendment No. 1 October 2010. Sheet to be stamped with mfg. s. name, month year of Mfg. in Ink & packed in polythene bag duly sprinkled with chalk powder individually.]
BEND PIPE ASSEMBLY FOR OIL PIPE LINE OF [BEND PIPE ASSEMBLY FOR OIL PIPE LINE OF HETT -5400 Transformer MPH to RH as per Drg no. BHEL-34661950036 Rev.- 04]
Set of gaskets for SCMRB Duct as per Drg [Set of gaskets for SCMRB Duct as per Drg no- ELS/VSKP/2019/18 Ref 1 to 4 (Set consist of 4 items, 4 Nos). Ref 1- Qty-01 No/sets, Ref 2- Qty-01 No/sets, Ref 3- Qty-01 No/sets, Ref 4- Qty-01. Material to be procured from CLW approved sources to CLW Item ID-2100556. one sample to be got approved before effecting bulk supply.]
HAND OPERATED CHAIN PULLEY BLOCK TO MODE [HAND OPERATED CHAIN PULLEY BLOCK TO MODEL NO. C SERIES 2TON 5MTRS (2 TONCAPACITY, LIFT 5 METERS) AS PER IS-3832 LATEST, WITH FOLLOWING GeM GOLDEN PAREMETERS. 1) ISI MARKED: YES. 2) STEEL SHAFT-GROUND (MN/m2): 17. 3) SAFE WORKING LOAD (% OF WORKING LOAD LIMIT): 100. 4) MECHANISM CLASS: M2. 5) AVERAGE LIFE (TOTAL LIFE Hr): > 40000. 6) STEEL SHAFT-NOT GROUND (MN/m2). 14. 7) MATERIAL: AS PER CLAUSES OF 6 OF IS: 3268 LATEST. 8) CONSTRUCTION: AS PERCLAUSES OF 5 OF IS:3268 LATEST. 9) AVERAGE LIFE (RUNNING (Hr/DAY): > 6. 10) RATING, TEST ANDMARKING: AS PER IS:3268 LATEST. 11) PLAIN BEARING MATERIAL: BRONZE. 12) NORMINAL SIZE OF LINK: 5 MM. 13) CONFIRMITY TO INDIAN STANDARD: IS:3832 LATEST. 14) TIME DURATION FOR REPAIRING / REPLACE THE DEFECT DURING WARRANTY: WITHIN ONE WEEK. 15)AVAILABILITY OF TEST REPORT FROM CENTRAL GOVT/NABL/LLAC ACCREDITED LAB TO PROVE]
110V/120AH Capacity Valve Regulated Lead [110V/120AH Capacity Valve Regulated Lead Acid Batteries for Tower Car Maintenance in sets of 19 Modules (6V per module) in charged condition with inter cell connector as per RDSO Specification No. RDSO/PE/SPEC/AC/0009-2014 (Rev.2) . (Item reserved for RCF approved sources only). ]
Automatic Fire Ball for Fire-Extinguishi [Automatic Fire Ball for Fire-Extinguishing of Medium size - the weight of the agent is not less than 1.0 kg but less than 1.8 kg, Equivalent to Model TFO 1300Z, required for Camping Coaches of Track Machines. Part Make: - TFO/FIRENXT/BRANDSDADDY AFE or Equivalent.]
HEX HEAD SCREW M.S. M5 X 15MM ZINC PLATED IS:1364/2002 REAFFIRMED IN 2007 (PT-2)/TSD
GASKET FOR INSPECTION COVER OF MAIN RESE [GASKET FOR INSPECTION COVER OF MAIN RESERVOIR AS PER DRAWING NO. ELW/BSL/4/WAG-9/31.007. (ITEM IS RESERVED FOR CLW APPROVED SOURCE ONLY).]
Non- Reversible thermal strips, Vertical [Non- Reversible thermal strips, Vertical mounting self-adhesive type, Range from 50 to 120 deg C in steps of min 8 levels 50,60,70,80,90,100,110,120 deg C, should show dual temp scale Deg C and Fahrenheit, should be oil, water Dust and Steam resistance, with accuracy of 1 +/- 1 deg C, Size 40X15 mm, A colour change from silver/ white to black indicates that the rating has been reached for easy identification stickers should be in Blue/Orange/Yellow Colour. Make: Paper Thermometer/ Thermolabel / ThermoTab / ThermoPaper / Palmer Wahl / NiGK/3M/VPL or equivalent. ]
Set of Industrial gas cutting flint Spar [Set of Industrial gas cutting flint Spark Lighter metal cup type. One set consists of one lighter and 10 nos. of replaceable flint (Sparking stone).]
Supply and Testing of 40 Nos. 12V 7 AH S [Supply and Testing of 40 Nos. 12V 7 AH Sealed Maintenance free lead acid battery for UPS with on site OEM Warranty for 12 months from date of supply or commissioning whichever is later. Make ? Exide/Luminous/Amco/Zebronics/Okaya/Zebion/relicell.]
HEX HEAD SCREW M10x25 MM, 1.5 MM PITCH T [HEX HEAD SCREW M10x25 MM, 1.5 MM PITCH TO IS: 1364 GRADE 8.8 ZINC PLATED. (ITEM IS RESERVED FOR CLW APPROVED SOURCES ONLY.)]
Main Chamber Flange "O" Ring (Nitrile R [Main Chamber Flange "O" Ring (Nitrile Rubber) Size : VPOR-12574 x 25 mm Dia. Make: Vacuum Plant & Instruments Mfg. Co. Ltd.]
Auxiliary contact of type 19071, 2 OC, 6 [Auxiliary contact of type 19071, 2 OC, 6A, 220 - 240V for M/s. Schneider Electric make MCB model NG125.]
Supply of Original HP 152A Black Toner f [Supply of Original HP 152A Black Toner for HP Laserjet Printer.]
Computerized test Bench for all type of pressure switches of 3 phase and conventional locomotives as per RDSO SMI No.- RDSO/2019/EL/SMI/0327 Rev-0 dated-11/02/19 and Specification attached.
SET OF ALL STEEL LOCK NUT to CLW SPEC. No. CLW/MS/3/089 ALT-4 Consists of 04 items 120 Nos as per DIN-980-M & PROPERTY CLASS-8
POH KIT FOR 203 MM BOGIE MOUNTED AIR BR [ POH KIT FOR 203 MM BOGIE MOUNTED AIR BRAKE CYLINDER, CONSISTING OF 18 ITEMS: 1) Special Washer, RDSO Drg. No. SK 81206, Alt.3, Item No.12, Qty/set-1. 2) Split Pin dia 5X40, RDSO Drg. No. SK 81200, Alt.5, Item No.18, Qty/Set-3. 3) Split Pin dia 3.2 X 18, RDSO Drg. No. SK 81200 Alt.5, Item No.38, Qty/Set-3. 4) Jubilee Clip size 5, RDSO Drg. No. SK 81200, Alt.5, Item No.21, Qty/Set-1. 5) Jubilee Clip Size 2, RDSO Drg. No.SK 81200, Alt.5, Item No.51, Qty/Set-1. 6) Ring, RDSO Drg. No. SK 81206, Alt.3, Item No.23, Qty/set-1. 7) Pawl Spring, RDSO Drg. No. SK 81206, Alt.3, Item No.19, Qty./Set-2. 8) Piston Packing, RDSO Drg. No. SK 81204, Alt.4, ltem No.10, Qty./Set-1. 9) Dust Excluder, RDSO Drg. No. SK 81204, Alt.4,Item No.5, Qty./Set-1. 10) Circlip light B22, RDSO Drg. No. SK 81200, Alt.5, Item No.5, Qty/Set-1. 11) Circlip light B16, RDSO Drg. No. SK 81200, Alt.5, Item No.53, Qty/Set-2. 12) Circlip light A32, RDSO Drg, No. SK 81200, Alt.5, Item No.3 l, Qty/set- 1. 13) Pawl, RDSO Drg. No. SK 81206, Alt.3, Item No-8, Qty/Set-2. 14) Shim for Plunger, RDSO Drg. No. SK 81206, Alt.3, Item No.16, Qty/set-2. 15) Special Washer. RDSO Drg. No. SK 81206, Alt.3, Item No.13, Qty/set-2. 16) Special Washer, RDSO Drg. No. SK 81206, Alt.3, Item No.15, Qty/set-2. 17) Collar (in 2 halves), RDSO Drg. No. SK 81206, Alt.3, Item No.4, Qty/Set-1. 18) Bush with Filter, RDSO Drg. No. SK 81202, Alt.3, Item No 3 & 4, Qty/set-1]
SET OF HOSE ASSEMBLY FOR WAP-5 BOGIE TBU [SET OF HOSE ASSEMBLY FOR WAP- 5 BOGIE TBU & PBU. ONE SET CONSISTING OF 02 ITEMS,12 Nos. 1) HOSE ASSEMBLY BOGIE PIPING (1/2") AS PER CLW DRG No. 1209-18.306-145 = 8 Nos. PER SET 2) HOSE ASSEMBLY BOGIE PIPING (3/8") AS PER CLW DRG No. 1209-18.306-146 = 4 Nos. PER SET ]
Set of Brake Gear Parts for WAP-7/WAG-9 [Set of Brake Gear Parts for WAP-7/WAG-9 Loco 01 Set comprising of 26 items, 210 Nos as per attached Annexure A , & as per 1) CLW Drg NO.1209-01-116-059 ALT 5 or latest. 2) RDSO Drg. No. SKVL 189 Alt-1, SKVL-190 Alt-1 3) RDSO Drg. No. SKEL 5064, SKEL 4876 Alt-2, SKEL 4877 Alt-1 4) ELW/BSL Drg No. TC2-GNA-40-R1. The item is to be procured as per CLW ITEM ID 2100215, only from CLW-approved sources or their authorized dealers.]
POWER CABLE COMPLETE WITH PRESS PLATE AN [POWER CABLE COMPLETE WITH PRESS PLATE AND CABLE CLEAT FOR TRACTION MOTOR TYPE 6FRA 6068 AS PER DRAWING NO.-TRS/GMO/TM/G-9/018. ONE SET CONSISTING OF- (1) ITEM NO. 3, CABLE CLEAT, QTY = 01 NO., (2) ITEM NO. 4, PRESS PLATE, QTY= 01 NO., AND 3) ITEM NO. 5, RUBBER BUSH, QTY = 6 NOS. ONE SET CONSISTS OF 03 ITEMS, 08 NOS. (NOTE: - ONE SET SAMPLE GOT TO BE APPROVED BEFORE BULK SUPPLY).]