Loading
Loading…
Loading…
46 results • Latest
Four minutes rapid set steel epoxy in pa [Four minutes rapid set steel epoxy in part A & B, Part A- Resin and Part B- Hardener. Each in 500 gram jars. (Total quantity 20 kg (40 jars) = 10 kg resin + 10 kg hardener). Make: Anabond Product: Steel epoxy) or 3M or Loctite. Sample suitability for other than Anabond Steel Epoxy should be confirmed from Consignee before bulk supply.]
Plastic / Fibber flap for fitting on bac [Plastic / Fibber flap for fitting on back side of seat. Size : 29" (H) X 18" (W) X 2 mm thick as per IS - 24496 with arrangement of Bottle, Paper holder & one MS Hook and suitable screws for fitting. (One sample to be approve from consignee before bulk supply.)]
Set of Air Brake Hose coupling consistin [Set of Air Brake Hose coupling consisting (1) BRAKE PIPE to RDSO DRG NO. SK-73547 ALT.13 OR LATEST, Qty 1 No./set (2) FEED PIPE to Drg. No. WD-81027-S-01, Qty 01No./set. (Length of hose of both items ]
WHEEL MONOBLOC-ROLLED (ROUGH MACHINED)(FOR KALKA-SHIMLA AND DHR SECTION ONLY) RDSO DRAWING NO D/WL-4905/R, ALT-10/LATEST, WHEELMONOBLOC MARKING TO BE DONE AS PER RDSO DRAWING NO DDO-208 ALT/11OR LATEST
PRESSURE SWITCH FOR PATB PRESSURE RANGE [PRESSURE SWITCH FOR PATB PRESSURE RANGE 6 TO 8 KG/CM. SQUARE ( RT 116 X INDFOS MAKE OR SIMILAR).]
WHEEL PROFILING INSERT LNUX-301940-16 [ COATED GRADE] UP GRADED NEW GENERATION GRADE KCP25 of KENNAMETAL , GC 3015 OF SAL OR WPP30 of WALTER INDIA.
SEAL WEAR RING WITHOUT VENT HOLE FOR CTR [SEAL WEAR RING WITHOUT VENT HOLE FOR CTRB CLASS-E [6 INCH X 11 INCH ] FOR FREIGHT STOCK 22.3/22.9 TON AXLE LOAD MAKE- TIMKEN PART NO. K-153392-00 STR. NO. AB/RB-39 - 2002 REV.-3 OF DEC.-2006 AMENDMENT-2 OF 2008 or latest.]
SPACER FOR CTRB CLASS E TO NEI DRG. NO. [SPACER FOR CTRB CLASS E TO NEI DRG. NO. PESD-6085 (NARROW) REV. D PART NO. 3 OR LATEST. as per RDSO Spec. AB/RB-40 -2016 Rev 2 As per sizes and quantity mentioned in annexure-I. Make: NBC.]
BRUSHES PAINT AND VARNISI FLAT SIZE 63 M [BRUSHES PAINT AND VARNISI FLAT SIZE 63 MM RUBBER SET, CONFORMING TO IS:384(part-1) : 2012 (Six revision) . AND BRISTLES TO IS-1844/1993 .. NOTE :- THIS ITEM IS RESERVED FOR NSIC REGISTERED FIRMS ONLY. as per Drg.No. THE TENDER SAMPLE SHOULD STIPULATE THE DATE AND YE]
Liquefied Petroleum Gas for industrial use in 19 Kgs. capacity firms own cylinders and empty cylinders on returnable basis confirming to IS: 4576-2021 with latest revision / amendments, if any.
DISOLVED ACETYLENE FILLED IN CYLINERS FOR INDUSTRIAL USE AT AMBIENT TEMPRATURE IS 308/1988 Cumt
Dust Excluder for JSL type brake cylinde [Dust Excluder for JSL type brake cylinder to drg.no.CEE/CR/EMU/MTN/KA/4/010/R2.]
1) Bastard Round Files. Equivalent to M/s [ Bastard Round Files. Equivalent to M/s Taparia Product no- RD2001 or Similar. Material Generally Confirming to IS: 1931- 2000, HSN Code- 82031000. ] 2) Hand Files 2nd Cut. Equivalent to M/s Ta [Hand Files 2nd Cut. Equivalent to M/s Taparia Product no- HF2502 or Similar. Material Generally Confirming to IS: 1931-2000, HSN Code- 82031000.] 3) Smooth Flat Files. Equivalent to M/s Tap [Smooth Flat Files. Equivalent to M/s Taparia Product no- FL2003 or Similar. Material Generally Confirming to IS: 1931-2000, HSN Code- 82031000.] 4) Engineers Flat file. Type: Hand No of cu [Engineers Flat file. Type: Hand No of cut: Double Grade: Bastard Shape: Flat Size: length 350mm / 14 inches. Width: 35 mm and above. Thickness: 7.5 mm. Material: 118 T3 or 133 T3 or According to IS 3748 or any Suitable alloy steel. Availability of safe edges: Yes. Standard: IS1931:2000, IS 3748. Make: Taparia / JK-SUPER DRIVE /Stanley / king tony / Addison] 5) Supply of File Tringular 30 Cm. Make- T [ Supply of File Tringular 30 Cm. Make- Taparia, Stanley, Groz. ] .
REGULATOR END FLASHBACK ARRESTORS FOR FU [REGULATOR END FLASHBACK ARRESTORS FOR FUEL GAS(DISSOLVED ACETYLENE GAS & LPG), SPECIFICATION :- (I)MAX WORKING PRESSUR-1.5/3BAR,(II) INLET CONNECTION -3/8BSP RH F, (III) OUTLET CONNECTION-3/8 BSPRH M, (IV)SAFETY ELEMENT: FA/NV/PV/TV, (V)MOUNTING: REGULATOR END.(VI) POP-UP RESET BUTTON.MAKE- ESAB/GCE/VICTOR GAS/MILLER WELD ONLY.]
4 Drum Spill Pallet as per attached Tech [4 Drum Spill Pallet as per attached Technical Specification as Annexure-A.]
ITEM NO. 5 PRESSURE REGULATORS FOR GAS C [ITEM NO. 5 PRESSURE REGULATORS FOR GAS CYLINDER USE IN WELDING CUTTING &RELATED PROCESSES TO BE USED WITH GAS OXYGEN NO OF STAGES IN REGULATORS TWO PRESSER GAUGES FILTED :2 OUTED VALER FITTED BRAND WT]
Liquefied Petroleum Gas for industrial use in 19 Kgs. capacity firms own cylinders and empty cylinders on returnable basis confirming to IS: 4576-2021 with latest revision / amendments, if any.
DISOLVED ACETYLENE FILLED IN CYLINERS FOR INDUSTRIAL USE AT AMBIENT TEMPRATURE IS 308/1988 Cumt
4.5 KW Underslung Constant Voltage, Regulated Cum Emergency Battery Charger for LHB coaches Confirming to RDSO Spec. No. RDSO/PE/SPEC/AC/0183 (Rev-2)- 2024. Material to be procured from RCF/ICF/RDSO approved sources or only. Note: Firm should supply test certificate & guaranty certificate along with supply of item. RDSO Item ID: 3100594
Centre Buffer Coupler Height Gauge (CBC [ Centre Buffer Coupler Height Gauge (CBC) consisting of foldable track base and vertical Column with a measuring scale and pointer having CBC height range: 900 to 1150 mm and track distance measuring range: 1676(-10 mm /+20 mm). the column have vertically bubble and is foldable for compactness and ease in storing and transportation. The accuracy of gauge is +/- 1.0 mm]
Supply installation and commissioning of Microcontroller based electronic Speed Indicating & Recording System with speed dependent relay contact output (04 Nos.) suitable for Narrow Gauge Loco as per RDSO Specification No. MP.0.3700.07 (Rev.07) August 2017. Make : MEDHA SERVO DRIVES PVT. LTD. / LAXVEN SYSTEM / AUTOMETERS ALLIANCE LTD. Only as per UVAM Item Ref. : 2201261. BLW Item ID: 2201261
STAINLESS STEEL UNEQUAL ANGLE MOULDING SSTAINLESS STEEL UNEQUAL ANGLE MOULDING SIZE 2440 x 75 x 13 x 1.6 mm TO DRG. NO.JT/SK. 3260 ALT.NIL.MATERIAL SPECN.SS GRADE 304. as per Drg.No. LETTER NO. RR/PR/86 DT. 12-05-2009
HOPPER WINDOW FOR LHB COACHES as per LZ5 [HOPPER WINDOW FOR LHB COACHES as per LZ54114 ALT b AND MDTS 089 REV-03 as per Drg.No. Drg. No. LZ 54114 ALT b and MDTS 089 REV-03 specn: Drg. No. LZ 54114 ALT b and MDTS 089 REV-03]
Design, engineering, manufacturing, fabrication, painting, inspection, packing & forwarding, insurance, transportation, supply, loading & unloading at site, installation, testing, commissioning, handing over, performance testing & training of CTRB Assembly workstation with simulteneous Bearing mounting arrangment and pressure recording system. (as per Annexure-1 attached)
24V 500AH, Maintenance free VRLA batteri [24V 500AH, Maintenance free VRLA batteries ( Dry Cell Batteries ), Consists of each cell 2V 500AH, Total- 12 CELLS (EACH CELL SIZE IS REQUIRED, LENGTH - 19.5 INCH, WIDTH - 8.5 INCH, HEIGHT - 5 INCH) along with STACK & STANDARD accessories. Use for SPIC. MAKE : AMRA RAJA / EXCIDE Only.]
ALUMINIUM FLAT MOULDING SIZE 2440 X 25 X [ALUMINIUM FLAT MOULDING SIZE 2440 X 25 X 2.5 MM ICF DRG NO WGSCWAC-4-3-017ALT 1& 4 ITEM NO.62 IS NO.737/1986]
TOGGLE SWITCH (G.F.C.O. SWITCH) (15A 250 [TOGGLE SWITCH (G.F.C.O. SWITCH) (15A 250V) DLW DRG.NO.EL/PT/0713 ALT NIL (ITEMNO.002) DLW Part.NO.12.31.9200.]
PVC Industrial Flexible 4.00 sq.mm, 4 Co [PVC Industrial Flexible 4.00 sq.mm, 4 Core, Conductor consist 56 Nos/0.30 sq.mm, 30 Amps, Voltage grade 1100Volts PVC Insulated cable with Annealed copper conductor As per IS: 694- 1999. Make: Polycab or Havells or Finolex only.]
Grinding Wheel with dimension (125x6.8x2 [Grinding Wheel with dimension (125x6.8x22.23MM). Grade: - A24PBF.]
UIC type Elastomer flange connections for Inter-communication between Passenger coaches to RDSO Drawing no. SK-99056, Alt. 3, Item no. 2 to 14 and 25. Material and specification conforming to RDSO STR No. RDSO/2007/CG 05, Rev-1 of November 2018 RCF Item ID: 2400023
One Coach Set of Air Spring Assembly (160 KN Capacity) for Main Line/Rajdhani LHB coaches for FIAT type Bogies as per RDSO Specification No. RDSO/CG/S/23002, Rev- 1. Scope of Supply shall be as per specification RDSO/CG/S/23002, Rev-1 (Each Coach Set will Consists of Four Air Spring Assembly). Packing Instruction - MCF SPI- 042. (AS) RDSO Item ID: 3100341
Class 'K' (6 1 / 2'' x 9'') CTRB. Drawing No. : NEI's Drg. No. RBSD-7077, Rev. B ,or Timken's Drg.No. E-56020, or SKF Technologies India's Drg. No. BT2-8606 Material and Specification : As per Drg. and conforming to RDSO s STR No. AB/RB-41-2016 (Rev. 1) of Dec. 2021. RDSO Item ID: 3100456
Axle Box 3 3/8" x 1 7/8" as per drg no. LBA 51 for Neral Matheran NG Coaches.
Liquefied Petroleum Gas for industrial uLiquefied Petroleum Gas for industrial use in 19 Kgs. capacity firms own cylinders and empty cylinders on returnable basis confirming to IS: 4576-2021 with latest revision / amendments, if any.
4.5 KW Under slung type Constant Voltage Regulated cum Emergency Battery Charger for LHB Coaches as per Specification No. RDSO/PE/SPEC/AC/0183 (Rev-2)- 2024. RDSO Item ID - 3100594
E-Beam irradiated cross linked single Core flexible cable of size 150sq.mm (Red - 300meter, Yellow -300meter, Blue -300meter and working voltage 1.8/3.0KV as per RDSO Spec No: ELRS/Spec/ELC/0019 Rev-4 of Feb-2018.
Steel Pneumatic Grinder, Speed 27000 RPM [Steel Pneumatic Grinder, Speed 27000 RPM, equivalent to Chicago Pneumatic Grinder model no. CP872]
SUPPLY OF NON AC AREA CEILING ARRGT. TO DRG NO.LE44005 ALT-d FOR LHB AC 3TIER COACHES WITH MDTS-44388, REV-NIL COMPLYING TO HL3 AS PER EN 45545- 2.
Destruction Tube with End Plate 12 x Dia [Destruction Tube with End Plate 12 x Dia. 170 (both sides welded) to ICF Drg. No. T-2-2-602, Alt-n/3, Item No. 4 and 6 and washer (Item no.1) Material and specification as per drawing.]
Piezo Electric Probe for Ultrasonic Test [Piezo Electric Probe for Ultrasonic Testing of Railway Components using contact method- with BNC socket on top & aluminium casing. Specification No. RDSO/M&C /NDT/116/2000,RevII.-October 2020 &Double Crystal UST Probe for normal beam scanning (RDSO Specs M&C/NDT/125/2004, Rev II, 4 MHz, 20 mm & 15 mm, Make-Modsonic.]
SOVIN Heat resistance Gaunlet, GeM produ [SOVIN Heat resistance Gaunlet, GeM product ID 5116877-23825059632]
Polymer Buffer Spring Pack Set. (consist [Polymer Buffer Spring Pack Set. (consisting of 3 items) to ICF Drg. No. ICF/STD-2-2-015 Alt-a/Nil, Col-II, Item Nos. 16, 17 & 18. Material & Spec. as per ICF/MD/Spec-353 with Amdt.1 of August 2019.]
Buffer Recoil Spring to ICF Drg No.ICF/S [Buffer Recoil Spring to ICF Drg No.ICF/STD-2-2-015 Alt-a/Nill,Item No.6 material & spec.as per ICF/MD/Spec-353]
Set of Centre Pivot Bolt Arrangement Con [Set of Centre Pivot Bolt Arrangement Consisting of- Hex head bolt M-24X110mm, Castle Nut M-24 & Split Pin 5X56. Bolt & Nut shall be of Make TVS or UNBRAKO or LPS only. (A) Hex Head Bolt M- 24X110mm-8.8 to Drg. No. T-0-6-614, Alt.b, Item 1, Col.-I, IS:1364 (P-1), Zink Passivated to A3L of IS:1367 (Part 11). (B) Castle Nut M-24 to Drg. No. T-0-6-614, Alt.b, Item 2, Col.-I, IS:2232-B-8, Zink Passivated to A3L of IS:1367 (Part 11). (C) Split Pin 5X56 to Drg. No. T-0-6-601, Alt.17 & u, Item 28, IS:549, Galvanising to IS:1573-86 Service Grade No.2 of Tab-2.]
Retro-reflective Tape Marker 40mm wide ( [Retro-reflective Tape Marker 40mm wide (Yellow colour) as per Note No. 07 of RDSO Drg. No.RDSO/CG/Drg/21009.]