TRS-DDU-STORES/EAST CENTRAL RLY Tender Results

COVER FOR GEAR CASE OIL LOOKING GLASS WITH 6X20MM BOLT FOR WAG-9/WAP-7 LOCO.

Set of rubber items for mounting of equipment to panel without E- 3 brake valve Consisting of 38 items 94 nos.

PRESSURE GAUGE 1/8 BC, 52 mm STD - 10 Kg, 52 mm OD, size 1/8 inch BSPT back connection , direct mounting type, range (0-10) Kg/Cm2 .

Set of Nitrile bonded cork gasket consisting of 06 items and 58 in nos.:- 1..Nitrile bonded cork -D Qty- 05 Nos. Drg. No.- TRS/GMO/E2/3PH/041/ECR 2.Nitrile bonded cork -E Qty- 05 Nos. Drg. No.- TRS/GMO/E2/3PH/041/ECR

Computerized and automatic microcontroller based test bench with printing facility for cab meters of conventional & 3 phase in electric locomotive with calibration certificate.

Glass part of Transformer oil gas extraction apparatus with glass fittings, connecting tubing suitable fixtures and necessary silicon tubing.

Earthing shunt for Bogie and Body as per Drawing no: - TRS/HWH/EL-629/13

Pinion retaining plate suitable for Hitachi traction motor HS15250A as per Drg.No.SKEL 4454 or CLW Drg.No.4TWD.095-094 and latest

T.M. Ammeter moving coil type.- Size 152X70X133mm Scale 82 mm Range 1.5-0- 1.0 KA Specification :- CLW Specn. No. CLW/ES/I-21 Alt.-A.

Baby Foot Step for 3-Phase locomotives (with red oxide painted) as per S.C.Rly. Drg.No.C/ELS/LGD/B.F/3/27, Alt-2

Soap Laundry in the form of Bars having approx. Size 50mmx50mmx370mm with minimum weight 900gms approx. conforming to IS:285-1992 with amend. No. 1 to 4. Type-1

Set of Nitrile bonded cork gasket for three phase loco main transformer one set consisting of 23 items qty-157 nos. As per attached annexure.Material as per RDSO TC NO.-ELRS/TC/0076 rev-1 dt. 22.02.2013 or latest.

SMGR pressure reducing valve Specification :- BT.Drg.No.-SWT-335139-P1, Pt.no.- S-3902,AAL Drg no. 9980643600169 Part no. G3902a, Siemag model no.FRSM-4 & part no.RFRSM-4 Firm's offer:SMGR PRESSURE REDUCING VALVE SIEMAG MAKE PART NO.RFRSM-4.

Fiber Glass Cord for Tap changer to REPL Part No. S1519 / Drg. No. SWT-435200-P1 or to Anantashree Part No. G1519 / Drg. No. 9919000109001. Make REPL or Anantashree

Ball Bearing 6316 C3 for Arno 120 KVA

Master controller with 06 main components (A) Angle transmitters (B) Connector 13 pins (C) Sub-D connectors (D) Reverser-switch (E) Cam switches (F) Spring as per CLW Spec. No.-CLW/ES/3/0031 Alt- J with latest Alteration Specn./ Drg No - CLW Spec. No.- CLW/ES/3/0031 Alt-J with latest Alteration.

Wire wound Resistor 4.7 ohms 1000W, Size 50 mm outer dia and resistor length 350 mm with suitable fixing clamp silicon coated.

COMPACT FLASH MEMORY CARD FOR AAL SPEEDOMETER PART NO. ACCSR 000008.

Traction motor safety lug adopter as per TRS/DDU drawing no. MT.TM.04.2023.14

SET OF ITEMS, MATERIAL-BRASS, FOR FITMENT OF PRESSURE GAUGE

Supply, installation and commissioning of thermal camera. Make: Bosch GTC 400C thermo camera or similar.

WHEEL DISTANCE MEASURING GAUGE SPRING LOADED TYPE FOR BG LOCOMOTIVES MODEL NO. WG-1 ZERO SET 1596 MM (+/- 15 MM). ACCURACY: +/- 0.1 MM THROUGH VERNIER SCALE,

Intelligent Universal Programmer Specification: (i) 48 Pin DIL/ZIF socket with respectable for 8 pin to 48 pin,300/600 mil devices.(ii) Four DAC for Vcc,Vpp1,Vpp2 and Vpp3 with 8 bit resolution. Software Controllable rise time and current limit protection.

Supply,Testing & commissioning of High pressure hot and cold water steam jet machine as per specification attached.

Set of modified fixed Contact & Mobile Contact complete for EP contactor type TCP 3421-25-2M & 3469-24-3M Specification:- CLW Drg.No-(1) 3TWD.112.010A. Alt.3 with latest (2) 3 TWD .112.116 A Alt. 3 with latest

Set of gasket for Aux.Compressor-CRC-150, One set consisting of (1) Gasket Cylinder to valve flat 00041152C-01No (2) Gasket Crank Case to Motor 000411630-01 No (3) Gasket Cylinder Head to valve flat 00041153C-01 No (4) Gasket Crank Case To Cylinder 00041164A/B/C of equal quantity-01 No (5) Oil Seal for motor of aux. compressor 000420350-01 No.

Timer Unit (PCB), Electronic Timing Module (ON/OFF Delay) For Relay Q-118 and Q- 119, for conventional locos. Type.- CT32.1/110 V DC.

"Coil 110V for Magnet Valve (VEPT VEAD ETC) To CLW Specn. No.CLW/ES/M.2 ALT-H SIMILAR TO SEITZ ROTEX MAGNET VALVE. TYPE SR-3038 SIZE III SL NO 23. POSITION 34.

Pressure regulator with gauge range 0-10 Kg/cm2. Max supply pressure 10 Kg/cm2 and out put pressure 1 to 8 Kg/cm2 as per SMC Part No.-IR-3020-F02BGI-A

3/4 inch Safety Valve set at 10.5 kg /sq.cm Specification :- CLW Specn.no.- 0/3/65/93 with latest Alt. Spec:

Insulating Ring (Inner) carrier plate Assembly specification BT Drg No- AM 400019 R-1 BT part No- S 1607 AAL Drg No- 9980383548801 AAL Pt No- G 1607.

Contact segment assembly for Reverser switch (T) of loco Specification :- CLW Drg.no.3TWD.101.050 Alt.-3 with latest in sheet no.1 & 2TWD.101.050 Alt.7 with latest in sheet no.2 (2 Sheets)

Modified single duct leather bellow for WAG 9/WAP7 locos Specn/Drg No CLW Drg No- 1209-01.018.029. Alt-2 with latest. Specn/STR No- RDSO Specn No- Spec/E- 7/06 REV-2

DC Brushless cab fan for Diesel Locomotives to DLW Drg No:10633908 ALT.AC, DLW Part No:18650016. Voltage:40-100V DC(Normal Operating Voltage:48-72 V DC), Current:0.18 to 0.3 Amps, RPM:3400-2500, Air flow:235 CFM .

HAND OPERATED HYDRAULIC CRIMPING TOOLS, C TYPE OPEN HEAD COMPACT, FORCE 10 TON, STROKE 25 MM, CRIMPING RANGE 10 MM2 TO 300 MM2, CRIMPING PROFILE HEXAGONAL,

Set of Temperature sensor gasket consisting of item as under:- (1) Set of Temperature sensor cover gasket for 3 phase locos. Gasket Part No.3EHM 4130056 P0001 as per ABB Drg.No.3EHM 311882 (Alt.4) with latest

.Metalized carbon strips suitable for High Reach pantograph with ADD provision Specification :- RDSO spec. no- RDSO/2014/EL/SPEC/0114 Rev-0 date may 2014 as per Drg.No. RDSO/2014/spec./0014, Rev specn: RDSO/2014/spec./0014, Rev, "0" Dt-May 2014

Coil complete for Tap changer BT Pt.no.- A 4150-38 & BT Drg.no.- SWT- 435385R1

Glass U - Tube Viscometer Reverse Flow Type as per IS : 1448 (Part-I): 1976 (P:25) along with work certificate for constant size:- 06 for LAB

White Contrast paint for crack detection by MPT method in 500ml metal can with spray system 425ml, net contrast of WCC specification of IS:3703/1980/8.2.2.1 or latest Technical Spec:- 1) Composition contains white pigments in a Volatile Solvent base confirms to BS:5044-73 & BS: 6072-81, 2) Normal operating temperature is form 5 degree centigrade to 50 degree centigrade. As per Drg. mentioned in description.

Foot Insulator for Pantograph Specification/Drawing No- CLW Specn.No CLW/ES/AC/1-1and CLW/ES/SK-4/AC/1-1 Alt-K.

AUX CONTACT 2 NO AS PER CLW SPEC NO. CLW/ES/0096 ALT -G FOR SCHEIDER

Safety valve assembly 3/8 inch for inter cooler ELGI Pt.No. A070025.