TRS-GMO-STORES/EAST CENTRAL RLY Tender Results

Supply of silica gel drying oven of capa [Supply of silica gel drying oven of capacity 25 Kg of model no MVI-SGDO18-DT2 in MV international make or its equivalent as per enclosed specification.]

Supply of 4MP bullet camera for CCTV cam [Supply of 4MP bullet camera for CCTV camera with minimum 0.333 inch of image sensor size, efficient H. 265 + compression technology, WDR 120db, password protection compatible, minimum 40 mtr of IR illumination range, minimum year warranty and on VIF compatible. specification should be similar to HIKVISION DS-2CD2043G2-IU model. should be compatible with the existing ISS CCTV system at MAS, MS etc.]

SUPPLY OF ACCESSORIES AS PER ANNEXURE A FOR THERMOCOUPLE HOSING FITMENT OF TEMPERATURE SENSOR IN TRACTION MOTOR OF WAG 9 AND WAP 7 LOCOS.

HEX HEAD SCREW M8 x 40mm. TO IS-1364/2002 (PT-2)-P.C. 10.9 ZINC PLATED. FROM RDSO/CLW APPROVED SOURCES ONLY.

Supply of anti-surge glass cartridge fuse holder with 1A fuse as per technical specification- 1.Mounting style- Panel-Snap-In 2. Permissible Temp. For Soldering- 270? for 5 seconds max. 3. Panel Thickness (Max.)- 2.5mm (Max.) 4. Material: Engg. Thermoplastic 5. Contact Resistance (Initial) - 10 m ohms max. 6. Cap Design- Screw-In 7. Fuse Link Size- 6.3x32 mm 8. Terminals- Solder type Make- RS Component, Siba or similar.

Safety Guard Assembly for Angle cock (BP&FP) for WAP-7/WAG-9 Locos as per CLW Drg. No. 1209-00.340-215.(One set of sample to be got approved before bulk supply).

Heavy duty high tenacity 100% polyster sling enclosed in single cover made of cover max nylon having safety factor 5:1 and genuine tag mentioning tonnage identity etc. capacity-4000kg/4ton circumference 8 meters.

Set of modified bellow plates for three phase locos.Each set consists of (1) Modified bellow plate for TM side (leather bellow) as per CLW Drg. No.1209.01.418.032 with latest, qty. - 06 nos. /set (2) Modified bellow plate for body side (leather bellow) as perCLW Drg. No. 1209.01.418.031 with latest, qty. - 06 nos./set.One set consists of 02 items in 12 nos.

Set of split pin for IR03H Pantograph. Each set consisting of 09 items (21 nos.) as per enclosed Annexure-B.

Filter drier for roof mounted packaged AC system in WAP-7/ WAG-9 locos as per RDSO Spec. no. RDSO/2007/EL/SPEC/0055, REV-2 May 2019. Makes: Danfoss/ Sporian/ Emerson or similar.

Top / Bottom Gasket for TM Blower duct. Specn/ Drg No :- ELS/GMO Drg. No- TRS/GMO/E3/G-9/008/ER or latest

Set of kit of Shafting head assembly for AAL Make VCB AAL Pt No- 4300007100/28 as per Annexure attached.

"Magnet valve assembly for Schneider make VCB part no.VDRM 00150-01

Spiral hose for WAG-9 ID-25.6 MM,OD=34.5 MM COLOUR-BLACK, Material Polymide- 6 as per Drg.No.-CLW/ES/0099, ALT-G with latest.

Contactor 3 ph 150 Amps to type no -LC1-F150 with one number coil for contactor to type LX4FF090 and one number contact block to type LADN13 to CLW Specn. No. CLW/ES/3/0201 Alt-D or latest.

Operation/ Isolation Instruction stickers self adhesive written on synthetic/plastic for Air dryer of 3 phase locomotives. Size A4.

Set of Cable Disconnection TM-1 to TM-6 FOR WAG-9 AND WAP-7 THREE PHASE ELECTRIC LOCOMOTIVES

TEFLON TUBE WITH STAINLESS STEEL FITTINGS- 14/8 x 1000, As per schunk PART NO 909010013900 , DRG NO 4-B09 4724 or As per Faiveley part no- FT0052511-103 or equivalent suitable FOR WBL -85 HR PANTOGRAPH and LX-3600 pantograph.

Hex Head Bolt M10 X 50mm fully threaded as per IS: 1364 part-II class 8.8 Galvanized. Make: TVS/LPS/DFL/UNBRAKO/BOLTMASTER or similar.

Breather locking plate for 3-phase locomotive drg. no. TRS/GMO/M2/G9/064.

KABA Key for Pneumatic panel of 3 phase locomotives (Blue key for Pneumatic panel of 3 phase Locomotives as per CLW Drg no. 1209-15-243-072 (CLW/ES/3/SK-3/0049 Alt-E) and specification no. CLW/ES/3/0049 ALT F. Material to be procured from CLW approved source CLW Item Id 2100022.

Dust Protection cover for master controller and filter contactor ON/OFF for three phase electric locomotives. Material Polycarbonate.

TERMINAL BOARD ASSLY. [COMPLETE] FOR TRA [TERMINAL BOARD ASSLY. [COMPLETE] FOR TRACTION MOTOR TYPE 6FRA 6068 OF ELECTRIC LOCO AS PER CLW DRG. No. 2TWD.096.019 OR LATEST To SPEC.No. 4TMS.096.025 or LATEST & STR No. CLW/TM/STR/0198 or LATEST.]

Set of Roof Hatch retainer Assembly for WAG9/WAP7 loco consisting of 04 items (each 02 nos. per set) as follows: - (i) Roof Hatch Retainer Assembly intermediate to CLW's Drg. No.-1209.10.237.051 (Alt.-1) or latest, (ii) Retaining Bolt to CLW's Drg. No.- 1209.10.437.055 (Alt.-1) or latest, (iii) Roof Hatch Retainer Assembly (END) to CLW's Drg. No.- 1209.10.337.077 (iv) Retainer Bolt to CLW's Drg. No.- 1209.10.337.054 (Alt.-2) or latest.

Self Gripping Sealing Rubber. Specification :- As per CLW spec.no.- CLW/MS/3/034 Alt-6

Spares Parts for Air dryer of M/s Stone India Limited

Roll pin for conventional type brake rigging as per drg no.- 06/2/19/133 Ref-2 (CLWs 2019s drg no.-06/4/19/148)Alt-1 or latest.

Set of material for data downloading of CCB electric loco consisting of (i) Interface USB network, KBIpart no.-783971 or Similar , QTY -01 No. and (ii) Cable assly PTU, KBI part no.784295 - QTY - 01 No. OR Similar. Make- Knorr Bremse india pvt. ltd.- Palwal.

Cam switches with plastic moulding used in M/s. Saitronix make angle transmitter of master controller to saitronix Pt.No: 4MT-2041.

Set of items for saitronix master controller as per annexure enclosed.

Kit for Duplex Check Valve change part no. 790006181 as per Annexure Attached.

Cattle guard/ Modified Caw catcher Assly. for Conventional and 3-phase Loco. Specification/ Drg.No CLW Spec. No. CLW/MS/3/107, Alt-8 with latest Altration.

SET OF NEOPRENE HOSE TO SET LIST NO. EL 29230068 (Rev 3) , SPEC NO.CLW/ES/3/0094/E.

Ring (Auto Drain Valve) to M/s. KBIL par [Ring (Auto Drain Valve) to M/s. KBIL part no. KP0049400 for CCB operating electric brake system.]

(1) Gas charging meter with low pressure [(1) Gas charging meter with low pressure (0-250 psi) and high pressure (0-500 psi) indicator suitable for Refrigerant R407C. Qty: 01 Nos. (2) Refrigerant charging hose B.P 3000 PSI W.P 700 PSI. Qty: 02 Nos. (3) Vacuum pump-single stage, high pressure, 1/4 HP, 250ml oil capacity, 57 L/min flow rate, suitable for Refrigerant R407C. Qty: 01 Nos. (4) Refrigerant 407C, Qty: 05 Kgs. suitable for Sidwal Intec, KKI Make Roof mounted Cab AC fitted in Electric locomotives]

Set of step size racer for axle box bearing CRU-150 of 3-phase locomotives as per RDSO SMI no. RDSO/2007/ELS/SMI/0246, Rev-2,

Pressure switch, Range-7 kg to 8kg/cm2,Type-MCS 11, AC 230 volt/2Amp, DC-24 volt/2 Amp, 110 volt/2 Amp for fitment in Air pressure circuit for 3 phase loco. Make- E.T.N, MOELLER or similar

RCB card Complete for CGL Make 3X130KVA IGBT Aux. Converter, CGL REFERENCE 110202009-new or latest.

SHOCK PULSE METER for bearing testing of Traction Motor with Shock pulse measurement, Vibration measurement of all three parameters (Displacement, Acceleration & velocity), Laser Tachometer measurement, Stethoscope for easy location of machinery noise, LCD display, along with standard supply: Shock pulse probe, Head Phone, Vibration sensor, powerfull magnetic base, hand held probe rod, Cable with cannectors, laser tachometer probe, Charger, Instrument manual. Detailed Specification as per specification no: CLW/TM/4111/24-25/029 Dated 15/01/2025. Make/Brand: SPM/MCM/SKF/FLUKE or Similar.

RR20100 CGM Rear Guard as per ELGI part no. 070315440 make ELGI.

MFI Card of BHEL make IGBT power convert [MFI Card of BHEL make IGBT power converter, BHEL Material Description:- MDL 69240MF2AA 4902B-MFI (Alt code : TI0668086173).]

Discharge/Earthing rod for 25KV AC Traction with Top clamp (suitable for 36 to 50mm Bus bar) and 10 mtrs, cable with earthing clamp complete as per RDSO specification no. ET1/OHE/51(9/87) with A & C slip no.1 with Rugged canvas Bag for Each discharge Rod.

SNUBBER CIRCUIT AS PER CLW SPEC. NO. CLW/ES/3/0067 ALT.B OR LATEST AND ABB DOC. NO. 3EHW470024R0005 USED IN CONTACTORS (3 PHASE, 415 V AND 110 V DC CONTROL SUPPLY).

Set of cable cleat and Press Plate for Traction Motor Type 6FRA6068 as per Drawing no: - TRS/HWH/EL/884/24. One set consist of (i) Press Plate (SL No.3)= 01 No. (ii) Compression Plate (SL No.2) = 01 No. (iii) Compression Plate (SL No.1) = 01 No. (iv) Rubber Bush (SL. No. 4) = 06 Nos.

Latching Push Button for Corridor lighting as per CLW Spec No. CLW/ES/3/0044 and CLW Drg. No- CLW/ES/3/SK-1/0044 (ABB Document No. HBTB585456R0102).

Hex. Socket Head (CSK) Cap Screw size M10x30, Grade A2-70. As per DIN 7991/ISO 10642, Gr.304.Make-Unbrako,TVS.

Rotary cam switch(Input voltage 380-415 VAC, type 3T26C, C3, two pole three way ON OFF selector switch)for control box panel suitable for roof mounted cab AC of three phase locomotive

Set of sealing ring one no. each from Ref.1 and Ref-2. Ref-1 sealing ring as per CLW Drg. no. 4TWD.096.030/1, Alt-2, Ref.-2 Sealing ring as per CLW Drg. no. 4TWD.096.030/2, Alt. 2.

UIC SOCKET (WITHOUT UIC PLUG) TO SPECN. No.CLW/ES/3/0047/E OR LATEST. MAKE/BRAND Schaltbau India, Part No.UIC KD 13 S C0 IN or Similar]

Brush paints and varnishes flat rubber set size 38 mm