Loading
Loading…
Loading…
24,820 results • Best match
REPAIR and RESURFACING OF ROADS, PATH and REPLACEMENT OF DAMAGED ROAD FURNITURE ETC TO ROADS AT AFSOD and 13 PARA SF AREA UNDER GE (NORTH) BANGALORE
M& L for preparing bituminous surface of road and marking 2.5mm thick centre line,stop lines,dashes,arrows etc. and the like exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with reflectorizing glass beads on bituminous surface with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed. Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained.
Construction of bitumen surface road at Main Bazaar, MC, Naraingarh (Recall)
Construction of bitumen surface road at Main Bazaar, MC, Naraingarh
Tejhati Kurumgram Road from 0.00 km to 8.20 km Surfacing work under Birbhum Highway Division No.-I in the District of Birbhum. (2nd Call).
Providing and laying Mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregate, fine aggregate, filler material and bitumen, prepared by using Mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder, mixing in specified proportions conforming to approved Job Mix Formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100°C, protruding 1 mm to 4 mm over mastic surface, including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and all other incidental charges and quality control all complete as per Clause 516 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) 25 mm thickness Tentative stone materials required per m2 area: 13.2mm size chips @ 0.0005 m³/m², 11.2mm size chips @ 0.0079 m³/m², 5.6mm size chips @ 0.0079 m³/m², Medium sand @ 0.0111 m³/m², bitumen (VG-40 bulk) @ 0.0143 Kg./m², bitumen (10/20 grade packed) @ 5.71 Kg./m² & Lime stone powder @ 10.29 Kg./m². (Actual quantity of materials required to be ascertained by Job Mix)
Kabulia-Tilokchak Road within Ch. 0.0 Km to 10.70 Km - Surfacing work under Hooghly Construction Sub-Division-2, P.W.Dte under Hooghly Construction Division.
Prime Coat Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm) Using Cationic Bitumen Emulsion SS -1 (Bulked)
Emergent Repair and surfacing course of Chuapur Northern connecting road under Berhampore Sub-Division No.-II, P.W.D. during the year of 2025-2026.
Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.
Maniktala to Bhogaipur Road via Majlishpur from 0.00 kmp to 4.00 kmp - Surfacing work under Nadia Division, P.W.D. in the district of Nadia
