Loading
Loading…
Loading…
5,653 results • Latest
Construction of Devarmal to Dholnar Road Length 3.00 Km.
Tack coat Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503. (ii) granular surfaces treated with primes @ 0.30 kg / Sqm
CONSTRUCTION OF ROAD IMPROVEMENT AT JAKKASANDRA MURUDAR LAYOUT NEAR BY PONNAPPA HOME
Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...
COMPLETION OF INCOMPLETE/ BAL WORKS FOR PDG AND LYG OF WMM 75 MM ,100 MM INCLG PRIME COAT USING BIT EMULSION, DBM 50 MM, BC 30 MM INCLG CLEANING , APPLYING TACK COAT WITH BITMEN VG-10 BET KM 20 TO KM 30 ON ZAWNGLING-MAWHERE-SAPI RDUNDER 71 RCC/24 BRT
Construction and maintenance of Rural roads under PMGSY-IV, Batch-I, 2025-26, Package No. RJ08P4-05 (District Bikaner)
20mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade/ modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 506 & for modified Bitumen Clause 511.Case -II By mechnical means.Bitumen VG-30
Construction of Seminar Hall and Dining Hall near International Guest House at KUK.
[10.1]Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. [Through Rate]
Restoration of Road Cut made by P.H Wing under the Jurisdiction of Road Division No.2 for the work of Strengthening Tertiary Treated Water Supply System and Laying of T.T. water lines in left out area to supply Tertiary Treated Water in Chandigarh
Providing and applying tack coat using hot straight run bitumen of grade VG-10 Bulk @ 3 Kg per 10 Sqm including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surfaceas per clause 503 of MORT&H specifications. complete in all respects to the entire satisfaction of Engineer In-charge.