Building Construction Tender Results

Construction of Buiding for Anamari Anganvadi

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

LABORATORY BENCH CONSITS OF SIZE 2400LX1200WX900H Storage Cabinets of 6001S1S - 4 nos, Supply and Installation of Laboratory Work benches/Storage units including granite worktops and other supporting structures/hardware’s based on the specified Make List. includes delivery to ABC, unloading the consignment and transporting it from the place of storage to the installation site. Supply & Installation of all utility service outlets and accessory fittings, electrical receptacles, plumbing and electrical switches & fittings identified on drawings as mounted on the laboratory furniture. Supply & Installation of all laboratory sinks, bottle traps, drain troughs etc. including service structures where specified and setting in place reagent shelves of the type shown in the drawings & removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the laboratory furniture and accessories and leaving the premises broom clean and orderly. ali Furniture shall meet the performance requirements and should follow SEFA 8 guidelines.a. Floor Based Cabinet with Metal Skirting • Welded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. • It should be relocated anywhere easily as it is an independent unit. • Cabinet should of square non-sharp edge construction. • Doors should be assembled with SS-304 hinge assembly. • Removable back panel should be provided to easily access the service lines running behind the cabinet benches. • Intermediate horizontal channels should be provided between door and drawer. • Toe-space of 90mm X 90mm is provided at front-bottom side of cabinet. • Levelers are provided for easy leveling of welded cabinet. • Shelf should be eight-bend panel with 20mm height. • Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. • Steel door and drawer front should be of double wall construction with sound dampenening material filled inside. • Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction • Dimensions: W=300/450/580/600/750/900 mm, D = 530mm, H = 875/725 mm • Configurations: 1 Shutter + 1 Drawer/4 Drawers/Leg Spaces/1 Shutter/2 Shutters/3 Drawers/2 Shutters + 1 Drawer/Sink Unit + 2 Shutters • MOC: MSCRCA: IS – 513 (1994)

Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- i) Choping losse and cracked concretee to required depth, cleaning the exposed surface of steel and concretee with wire brush and sand papering , cleaning of concretee surface with water as necessary and getting dried. ii) Applying Epoxy primer on the exposed steel bars. iii) Applying Epoxy hardener and resin mix (as per manufectured's specification) on concretee and steel bars with brush. iv) Spreading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. vi) Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect.

eTendering System Government of NCT of Delhi Created By: Kuldeep Sundli Created Date/Time: 29-Dec-2025 12:10 PM Tender Title: AR and MO to District Court Rohini, Delhi dg. 2025-26. SH Repair and maintenance of Court Building such as finishing work, false ceiling work, replacement of damaged MS Drain Covers and shaft cover and other misc. civil and repair work Tender ID: 2025_PWD_283206_1