Building Construction Tender Results

eProcurement System Government of Maharashtra Created By: SHRADDHA SUDEWAD Created Date/Time: 06-May-2026 12:20 PM Tender Title: Construction of Civil Electrical and Mechanical Works for Hanbarwadi Lift Irrigation Scheme Stage 2 Tal Karad Dist Satara Tender ID: 2025_CWRDP_1254866_2

Providing and fixing double scaffolding system on the exterior side, upto five story made with 4" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding. Note : This item to be used for maintence work judicially

Providing and laying M30 grade design mix (with 100% OPC, Min. cement content 350Kg/Cu.m) Steel fiber reinforced concrete, with 3D 80/60 BG (Bekaret/Bundled glue) glued Non balling steel fibres with aspect ratio of 80, 60mm length and 0.75mm dia as per CE label mark system 1(steel fibres for structural use) at 15kg/Cu.m, using Somero Laser Screed/Topal/Magic Screed to screed, vibrate, the concrete, carrying out Levelling using bull-float, bump cutter to remove excess / high spots from the surface, setting it using power trowels and finally finishing using Ride on Trowels all as per standards; complete workable RMC with desired slump range, in panels of approved size as per approved drawing and as directed by the Engineer in charge. The cost includes dosing at RMC plant & trimming of fibres sticking out after finishing of concrete as directed by EIC, including surface preparation of entire floor area by removing spalled edges along cracks mechanically using angle grinding machine, chipper, chisel etc as the case may be if required, cleaning, grouting the grooves completely using Industrial Repair Mortar & application of SBR Latex Bonding agent over the entire floor area. Cost Includes fixing wooden/ formworks as per pour plan; spreading concrete using placers while slab casting; cleaning concrete spilled over on to the panels and cleaning the floor to remove sludge while saw cuttings & other activities. Providing and applying Non-metallic Heavy Duty Monolithic Floor Hardener (Make: SIKA, FOSROC/MTK/Equivalent) of approved material by EIC, pre-blended, standard grey or equivalent approved shade/colour to an avg 4Kg per Sqm, all complete, as per manufacturer's specification and Terms. The cost includes Saw Cutting to create control joints at 4mx 4m intervals and at construction joint locations after opening of joints, to avoid double joint formation. Providing & filling the top 10mm with Polysulphide Sealant (Make: SIKA, FOSROC/MTK/Equivalent) with bottom ancillary of backer rod; cutting size min 3mm wide & min depth of 1/4th of the thickness of the slab but not exceeding 50mm and blanket water curing using 200 microns LDPEfor minimum 10days. After curing, grinding & cleaning the entire surface to remove loose particles, dust etc ,. Providing and application of Liquid Floor Hardener cum Concrete Densifier (Lithium silicate liquid densifier) to strengthen, dustproof and seal the top concrete and burnishing/Polishing with polishing tools in series to give a Dust Free densified floor.

2.00 SUFIA CONSTRUCTION (GSTN-19ACGPI9551E1ZG) BID ID -10115889 4441599.00 -1.20 4388299.81 Forty Three Lakh Eighty Eight Thousand Two Hundred and Ninety Nine