Building Repair & Renovation Tenders

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately Upto area 2.5 Sq.m

prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 7579 193.7 1468052.3 4 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per 13.52 manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 5 13.52.1 On steel work Sqm 1865 241.75 450863.75 Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 6 13.61.1 Two or more coats on new work Sqm 198 155.9 30868.2 Total 4097399.05 Item- 9 Chapter-15 S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 1.5 2434.25 3651.38 1 equivalent design mix) MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 2 15.7.4 In cement mortar cum 5 2060.2 10301 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 3 15.12.1 Of area 3 sq. metres and below Each 40 367.2 14688 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 4 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 2649 73.4 194436.6 15.56 Dismantling old plaster or skirting raking out Sqm 1866 54.65 101976.9 joints and cleaning the surface for plaster 5 including disposal of rubbish to the dumping ground within 50 metres lead. 15.57 Dismantling aluminium/ Gypsum partitions, Sqm 280 56.35 15778 doors, windows, fixed glazing and false ceiling 6 including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 15.60 Disposal of building rubbish / malba / similar cum 1200 263.95 316740 unserviceable, dismantled or waste materials by mechanical means, including loading, 7 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. Total 657571.88 Item- 10 Chapter-16 S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK 16.49S MISCELLANEOUS Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar 16.87 locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 16.87.1 With granite stone of colour black, cherry/ruby Sqm 51 4950.9 252495.9 1 red of area less than 0.50 sqm. Total 252495.90 Item- 11 Chapter-17 S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 7 6767.4 47371.8 1 size 580x440 mm with integral type foot rests MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 10 6515.55 65155.5 2 seat and lid Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. Each 8 6258.75 50070 3 automatic flushing cistern Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.6 White Vitreous China Angle back wash basin Each 10 1756.85 17568.5 4 size 400 x 400 mm with single 15 mm C.P. brass pillar tap Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 5 17.10.1.1 510x1040 mm bowl depth 250 mm Each 4 6945.6 27782.4 17.22A Providing and fixing CP Brass 32mm size Bottle Each 10 1034.8 10348 6 Trap of approved quality & make and as per the direction of Engineer-in-charge. 17.22B Providing and fixing CP Brass Single lever Each 10 6940.75 69407.5 telephonic wall mixer of quality and make as 7 approved by Engineer in charge.(a) 15 mm nominal dia 17.23 Providing and fixing white vitreous china flat Each 2 1648.95 3297.9 back or wall corner type lipped front urinal 8 basin of 430x260x350 mm or 340x410x265 mm sizes respectively. Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 9 17.28.1.2 40 mm dia Each 10 116.7 1167 Providing and fixing mirror of superior glass (of approved quality) and of required shape and 17.32 size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 10 17.32.2 Rectangular shape 453x357 mm Each 5 1361.8 6809 11 17.32.4 Rectangular shape 1500x450 mm Each 5 2093 10465 Total 309442.60 Item- 12 Chapter-18 S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 1 18.7.1 15 mm nominal dia Pipes Metre 150 286.8 43020 2 18.7.2 20 mm nominal dia Pipes Metre 130 335 43550 3 18.7.3 25 mm nominal dia Pipes Metre 125 401.55 50193.75 4 18.7.4 32 mm nominal dia Pipes Metre 100 518.75 51875 5 18.7.6 50 mm nominal dia Pipes Metre 75 934.15 70061.25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 6 18.8.1 15 mm nominal dia Pipes Metre 50 497.8 24890 7 18.8.2 20 mm nominal dia Pipes Metre 150 537.6 80640 8 18.8.3 25 mm nominal dia Pipes Metre 25 627.25 15681.25 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 9 18.15.1 15 mm nominal bore Each 10 353.25 3532.5 Providing and fixing brass stop cock of 18.16 approved quality : 10 18.16.1 15 mm nominal bore Each 10 353.25 3532.5 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 11 18.17.1 25 mm nominal bore Each 4 622.4 2489.6 12 18.17.3 40 mm nominal bore Each 3 826.1 2478.3 13 18.17.4 50 mm nominal bore Each 2 1026.65 2053.3 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 15000 11 165000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 14 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 15 18.53.1 15mm nominal bore Each 20 574.3 11486 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 15 111.45 1671.75 having length of 138mm, breadth 102mm, 16 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 17 18.74.2 15 mm nominal bore with 45 cm length Each 20 121.9 2438 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Total 574593.20 Item- 13 Chapter-21 S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 50 495.05 24752.5 1 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.1.2 Powder coated aluminium (minimum thickness Kg 50 530.9 26545 2 of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 54 1505.25 81283.5 3 (weight not less than 12.50 kg/sqm) 21.3.3 With float glass panes of 8 mm thickness Sqm 59 1685.4 99438.6 4 (weight not less than 20 kg/sqm) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 5 21.8.1 Upto 5mm depth and 5 mm width Metre 165 96.75 15963.75 21.13 Providing and fixing Brass 100mm mortice latch Each 20 528.85 10577 and lock with 6 levers without pair of handles 6 (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 21.17 Providing and fixing anodised aluminium grill Kg 405 638.35 258531.75 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre 7 to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). Total 517092.10 Item- 14 Chapter-22 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing treatment Sqm 157 617.05 96876.85 in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second 1 layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Total 96876.85 Item- 15 Chapter-26 S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.1S General Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate 26.26 cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.26.2 With fully perforated 12 mm thick micro tegular Sqm 152 1907.35 289917.2 1 edged or 10 mm thick square edged GRG false ceiling tiles. 26.28S REPAIR AND REHABILITATION ITEMS Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders 26.28 of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 2 26.28.3 25 mm average thickness Sqm 2291 126.75 290384.25 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and 26.29 removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In- Charge. 3 26.29.1 Bars upto 12 mm diameter Metre 350 8.25 2887.5 4 26.29.2 Bars above 12 mm diameter Metre 200 16.45 3290 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC 26.31 as per specifications and direction of Engineer- In-charge complete in all respect. 26.31.2 Epoxy bonding adhesive having coverage 2.20 Sqm 2291 285.2 653393.2 5 sqm/kg of approved make Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre- measurement of thickness shall be done just 26.32 after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 6 26.32.2 25 mm average thickness in 2 layers. Sqm 2291 587.35 1345618.85 Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing 26.36 arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge. 7 26.36.1 Wooven PVC cloth Sqm 774 54.25 41989.5 Total 2627480.50