Chemicals & Industrial Materials Tenders

Description :Wear plate, Confirming to Plasser Part No. 62.08.1215. SPECIFICATION: "Special designe d Bi-Metal wear resistances plate developed by weld overlay process as per following details:- (1)Base Material:- The base material will be Hardox-400 or equivalent material with following chemical compos ition. Carbon=0.14-0.32%, Chromium=0.30-1.40%, Manganese=1.60% max, Molybdenum=0.25- 0.60 %, Silicon= 0.70% Max, Nickel=0.25 -1.50%. (2)Hardness of Base Material 370- 420 BHN. (3)Weld Dep osit:- Thickness of weld overlay deposit should be at least 5 mm. The Weld overlay deposit will be of e nrich complex carbide offering almost 35-45% primary carbides concentration to ensure enhanced life of minimum as specified at performance warranty, with alloy basis of C, Cr, Mn, V, B, Si with hardness of 380- 430BHN. RDSO DRAWING: TM/9315/1 Rev-1. Acceptable Make/Brand: - Plasser or Equivalent. [ Warranty Period: 30 Months after the date of delivery ] ] GENERAL STORES DEPOT Rajasthan 468.00 Numbers Consignee AJMER, NWR Inspection Stage Inspection Not Required Details

Description :2.5 SQMM, CHOCLATE COLOUR, ELECTRON BEAM IRRADIATION CURING PROCESS THIN WALLED FLEXIBLE ELASTOMERIC CABLE WITH COPPER CONDUCTOR SUITABLE FOR ROLLING STOCK A PPLICATION CONFORMING TO RDSO SPEC.NO.ELRS/ SPEC/ELC/0019 REV.4, FEB-2018, 1.8 KV GRADE. NOTE: CABLES SHALL BE SUPPLIED IN COILS OF 500 METRES LENGTH AND LEFT OVER QUANTITY IN M ULTIPLES OF 100, WITH A TOLERANCE OF +/- 5% ON THE LENGTH [ Warranty Period: 30 Months aft er the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ] FURNISHING Tamil Nadu 137000.00 Metre Consignee DEPOT/ICF,Chennai, ICF UVAM Item ref. ( Item Id :- 3100270 - Thin walled flexible elastomeric cables with copper conductors for working voltages (i) up to 750 volts and (ii) above 750 volts up to 1.8/3.0 kv for tap changer electric locomotives , AC/DC EMU, BG AC EMU & MEMU/ coaching stock ( Chemical curing process / Electron Beam Irradiation curing process) ) Inspection Stage Inspection Not Required Details

Description :Set of spares for Transformer oil filtration plant. set consists of 04 items as follows: 1)Nitrile p olymer rubber O ring compound as per group C of 3.2.4.1 to IRS.R 48/88 or ASTM D2000 / IS 3400 dimensio ns :OD-26mm,ID-16mm,Thickness -5mm; Qty: 100 Nos. 2) Nitrile polymer rubber cord dia 4mm compound as per group C of 3.2.4.1 to IRS.R 48/88, or ASTM D2000 / IS 3400; Qty: 10 Meters. 3) Nitrile polymer rubbe r cord dia 8mm compound as per group C of 3.2.4.1 to IRS.R 48/88,or ASTM D2000 / IS 3400; Qty: 10 Meter s. 4) Teflon washer made of Virgin PTFE,conforming to ASTM D4894 / ASTM D4895 IS 13708,suitable for tra nsformer oil,temperature range -200 degree centigrade to +260 Degree centigrade, excellent electrical ins ulation and chemical resistance. as per dimensions :Inner Dia-7mm,Outer Dia -14mm,Thickness -3mm; Qty:

Description :Thin walled Electron beam irradiated / chemically cured cross-linked flexible elastomeric cabl e with copper conductor single core, Size: 35 Sq.mm, 3000V to RDSO specification No.ELRS/SPEC/ELC/ 001 9, Rev.4 of February 2018.The requirement of working voltage above 750 V upto and including 1.8 KV RMS to earth and 3KV between phase on AC circuit. Note-Cable length should be in length of 500 mtr in each dr um. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ] Consignee SSE LRS, WR Gujarat 1280.00 Metre UVAM Item ref. ( Item Id :- 3100270 - Thin walled flexible elastomeric cables with copper conductors for working voltages (i) up to 750 volts and (ii) above 750 volts up to 1.8/3.0 kv for tap changer electric locomotives , AC/DC EMU, BG AC EMU & MEMU/ coaching stock ( Chemical curing process / Electron Beam Irradiation curing process) ) Inspection Details Stage Inspection Not Required