Civil Construction Tenders

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR ) (DSR 10.2)

the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (DSR. 17.4.1 (Civil)Ê
N

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (DSR. 17.7.3 (Civil):
x
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25MM (DSR. 18.17.1 (Civil)c(
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately) DSR. 16.75 (Civil)Þ
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR. 17.31 (Civil)Ë
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). :450 mm dia piles (DSR. 20.2.1 (Civil)ì
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : (300MM dia Pile) DSR 20.3.1 (Civil)¥1:2:4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR. 4.1.3 (Civil)—¤ë
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources) DSR. 4.11 (Civil)Ú|
Centering and shuttering including strutting, propping etc. and removal of form forShelves (Cast in situ)(DSR. 5.9.4 (Civil)iÙ
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) DSR. 6.13.2 (Civil)Æ”

Providing and fixing of ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR. 9.21.2 (Civil)
 
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x58x1.90 mm DSR 9.70.2 (Civil)Ž:

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece DSR 10.5.2 (Civil)'
¹

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. DSR. 10.18 (Civil)§
)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksDSR. 10.25.2 (Civil)
T
Extra for pre finished nosing to treads of steps of marble stone..DSR. 11.24 (Civil)Bu
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre.DSR. 11.25 (Civil)c«
Cement plaster skirting 18mm thick up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. DSR. 11.6.1 (Civil)—m
Providing and fixing 40mmx4mm glass strips in joints of terrazo/ cement concrete floors..DSR. 11.13.1 (Civil)Y*

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete..DSR. 11.27 (Civil)
Ø
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.DSR. 11.2 (Civil)Ǫ
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2 mm thick flat.DSR. 12.47.2 (Civil)–˜
Providing & fixing at all heights, levels and locations colour finish Aluminium 0.56mm alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).DSR. 12.65.1 (Civil)„~
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) DSR. 13.5.2 (Civil)k~
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) DSR. 13.5.1 (Civil)kO
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) DSR. 13.4.2 (Civil)O
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR. 13.4.1 (Civil)›
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. DSR. 13.26 (Civil) ˆ4

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) DSR. 13.81.1 (Civil)
Ò
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR. 13.80 (Civil)Àÿ
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR. 13.62.1 (Civil)ëà
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR. 13.46.1 (Civil)Ìu

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR. 13.41.1 (Civil) `
§
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR. 13.88 (Civil)•¤
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work DSR. 13.99.1 (Civil)î
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR. 15.2.1 (Civil)Û´
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface DSR. 13.111.1 (Civil)Ÿ´
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/ 10 sqm) on existing cement paint surface DSR. 13.111.2 (Civil)٠

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1cement: 4 coarse sand) DSR. 14.1.2 (Civil)s
î
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR. 15.2.2 (Civil)Ûâ
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.DSR 15.18 (Civil)ÑÌ
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : area upto 3 sqm DSR. 15.12.1 (Civil)¸›
Dismantling tile work in floors and roofs (10mm to 25mm thick) laid in cement mortar including stacking material within 50 metres lead..DSR 15.23.1 (Civil)ˆ¶
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR 15.56 (Civil)¥’
Dismantling GS Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead.DSR 15.28.1 (Civil)>

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved..DSR 15.60 (Civil)-
é
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) DSR. 16.53 (Civil)×
Providing and fixing of 20mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.(DSR 18.8.2 (Civil) ’
Providing and fixing 15mm C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR. 18.53.1 (Civil)~m
Providing and fixing 15mm C.P. brass bib cock of approved quality conforming to IS:8931. DSR. 18.49.1 (Civil)Y per liter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR. 18.48 (Civil)
y
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20MM (DSR. 18.17.1A (Civil)c

Providing and laying of 75 mm Dia. SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. CSI No 27.29 (a) SOR 2023-24ç

Providing and laying of 110mm dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. CSI No 27.29 (c) SOR 2023-24æ¿
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps DSR 2.12.2 (E&M)­

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR 1.12 (E&M)



Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.14.2 (E&M)ñý
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR 1.14.3 (E&M)íá
Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge SOR 2023-24 CSI No. 28.38)dž
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.DSR(22.7.1)ݻŸĈ匀灵汰⁹…楦楸杮漠⁦瑳敥楷敲爠灯⁥潦⁲猠扵敭獲扩敬瀠浵⁰湩汣摵湩⁧潣瑳漠⁦慬潢牵‬♔⁐湡⁤慭整楲污爠煥極敲⁤潦⁲潣灭敬楴湯漠⁦潷歲‮千⁉潎‮㤱㌮‴体⁒〲㌲㈭‴„ɮĈ倀潲楶楤杮愠摮氠祡湩⁧潐楬桳摥䜠慲楮整猠潴敮映潬牯湩⁧湩爠煥極敲⁤敤楳湧愠摮瀠瑡整湲ⱳ椠楬敮牡愠⁳敷汬愠⁳畣癲汩湩慥⁲潰瑲潩獮漠⁦桴⁥畢汩楤杮愠汬挠浯汰瑥⁥獡瀠牥琠敨愠捲楨整瑣牵污搠慲楷杮⁳楷桴ㄠ‸浭琠楨正猠潴敮猠慬⁢癯牥㈠‰浭⠠癡牥条⥥琠楨正戠獡⁥景挠浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮㨠㐠挠慯獲⁥慳摮 慬摩愠摮樠楯瑮摥眠瑩⁨散敭瑮猠畬牲⁹湡⁤潰湩楴杮眠瑩⁨桷瑩⁥散敭瑮猠畬牲⁹摡業數⁤楷桴瀠杩敭瑮漠⁦慭捴楨杮猠慨敤椠据畬楤杮爠扵楢杮Ⱐ挠牵湩⁧湡⁤潰楬桳湩⁧瑥⹣愠汬挠浯汰瑥⁥獡猠数楣楦摥愠摮愠⁳楤敲瑣摥戠⁹桴⁥湅楧敮牥椭⵮桃牡敧‮潐楬桳摥䜠慲楮整猠潴敮猠慬⁢潣潬牵漠⁦求捡Ⱬ䌠敨牲⽹畒祢删摥漠⁲煥極慶敬瑮䐠剓‮ㄱ㔮⸶‱䌨癩汩娩Ḃࠀ
楆楮桳湩⁧楷桴䔠潰祸瀠楡瑮传潣据敲整眠牯琨潷漠⁲潭敲挠慯獴 瑡愠汬氠捯瑡潩獮瀠敲慰敲⁤湡⁤灡汰敩⁤獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩獮椠据畬楤杮愠灰潲牰慩整瀠楲業杮挠慯ⱴ瀠敲慰慲楴湯漠⁦畳晲捡ⱥ攠捴‮潣灭敬整䐠剓‮㌱㔮⸲′䌨癩汩퐩Ḁ଀ࠂ
牐癯摩湩⁧湡⁤慬楹杮嘠瑩楲楦摥琠汩獥椠楤晦牥湥⁴楳敺⁳琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥Ⱙ眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠〮┸愠摮挠湯潦浲湩⁧潴䤠㩓ㄠ㘵㈲‬景愠灰潲敶⁤牢湡⁤…慭畮慦瑣牵牥‬湩愠汬挠汯畯獲愠摮猠慨敤‬湩猠楫瑲湩Ⱨ爠獩牥漠⁦瑳灥ⱳ氠楡⁤楷桴挠浥湥⁴慢敳⁤楨桧瀠汯浹牥洠摯晩敩⁤畱捩敳⁴楴敬愠桤獥癩⁥眨瑡牥戠獡摥 潣普牯業杮琠卉›㔱㜴ⰷ椠癡牥条⁥‶浭琠楨正敮獳‬湩汣摵湩⁧牧畯楴杮漠⁦潪湩獴⠠慐浹湥⁴潦⁲牧畯楴杮漠⁦潪湩獴琠敢洠摡⁥敳慰慲整祬⸩楔敬匠穩⁥〶‰⁸〶‰浭䐠剓‮ㄱ㐮⸷′䌨癩汩ḁ漀ࠀ
牄⁹瑳湯⁥楰捴楨杮㈠⸲‵浣琠楨正椠据畬楤杮猠灵汰⁹景猠潴敮⁳湡⁤牰灥牡湩⁧畳晲捡⁥潣灭敬整⸮䐨剓‮㘱ㄮ‱䌨癩汩尩Ḁ฀ࠁ
牂捩潷歲椠潦湵慤楴湯☠瀠楬瑮⁨楷桴漠摬搠獩慭瑮敬⁤戠楲正⁳猨灵汰敩⁤祢搠灥牡浴湥⁴牦敥漠⁦潣瑳 湡⁤潣牡敳猠湡⁤洠牯慴⁲湩ㄠ㘺椠据畬楤杮猠灵汰⁹景愠汬漠桴牥洠瑡牥慩獬‬慬潢牵‬敲潭楶杮洠牯慴⁲…汣慥楮杮漠⁦汯⁤…獵摥戠楲正ⱳ♔⁐瑥⁣潣灭敬整‮千⁉潎‮⸶㠱匠剏㈠㈰ⴳ㐲öLjĈ倀潲楶楤杮愠摮氠祡湩⁧楶牴晩敩⁤汦潯⁲楴敬⁳湩搠晩敦敲瑮猠穩獥⠠桴捩湫獥⁳潴戠⁥灳捥晩敩⁤祢琠敨洠湡晵捡畴敲⥲眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠〮┸愠摮挠湯潦浲湩⁧潴䤠㩓ㄠ㘵㈲‬景愠灰潲敶⁤慭敫‬湩愠汬挠汯畯獲愠摮猠慨敤ⱳ氠楡⁤湯㈠洰桴捩散敭瑮洠牯慴⁲㨱‴ㄨ挠浥湥⁴›‴潣牡敳猠湡⥤‬潪湩楴杮眠瑩⁨牧祥挠浥湥⁴汳牵祲䀠㌠㌮欠⽧猠浱†湩汣摵湩⁧牧畯楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴湡⁤慭捴楨杮瀠杩敭瑮⁳瑥⹣‬潣灭敬整⸮†〶‰⁸〶‰浭䐠剓‮ㄱ㐮⸱′䌨癩汩됩ḁ䠀ࠁ
片畯楴杮琠敨樠楯瑮⁳景映潬牯湩⁧楴敬⁳慨楶杮樠楯瑮⁳景㌠洠楷瑤ⱨ甠楳杮攠潰祸朠潲瑵洠硩漠⁦⸰〷欠⁧景漠杲湡捩挠慯整⁤楦汬牥漠⁦敤楳敲⁤桳摡⁥〨ㄮ‰杫漠⁦慨摲湥牥愠摮〠㈮‰杫漠⁦敲楳数⁲杫Ⱙ椠据畬楤杮映汩楬杮⼠朠潲瑵湩⁧湡⁤楦楮桳湩⁧潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥吮汩⁥楓敺㘠〰砠㘠〰洠卄⹒ㄠ⸱㠴㈮⠠楃楶⥬Ĵ¹Ĉ匀灵汰⁹湡⁤楦楸杮漠⁦䕌⁄畔敢䰠杩瑨眠瑩⁨慢瑴湥猠極慴汢⁥潦⁲灵琠‱⁘㈲眠瑡⁴䕌⁄畴敢氠杩瑨映瑩楴杮椠据畬楤杮琠扵⁥湯匠牵慦散挠浯汰瑥⁥湩愠汬爠獥数瑣‮偕坐⁄㐱㌱†䱅䍅剔䍉䱁匠剏㈠㄰‸˜ĝĈ匀灵汰⁹湡⁤楦楸杮漠⁦汥捥牴湯捩映湡爠来汵瑡牯 潍畤慬⥲ㄠ〲㈭〸嘠‮卉⁉洠牡敫Ɽ漠桴⁥硥獩楴杮猠楷捴⁨潢牡⁤湩汣摵湩⁧慭楫杮挠湯敮瑣潩獮爠煥極敲⁤慭整楲污‬慬潢牵♔⁐瑥⹣映牯瀠潲数⁲潣灭敬楴湯漠⁦潷歲琠桴⁥慳楴晳捡楴湯景䔠杮湩敥⁲湩挠慨杲⁥景眠牯⹫唠偐䑗ㄠ〲䌳†䱅䍅剔䍉䱁匠剏㈠㄰‸û䐀祡ùĈ匀灵汰⁹湡⁤楦楸杮漠⁦䕌⁄瑓敲瑥氠杩瑨䘠瑩楴杮栠癡湩⁧楤⁥慣瑳愠畬業楮浵戠摯⁹湡⁤楤晦獵牥眠瑩⁨牤癩牥猠瑥猠極慴汢⁥潦⁲㔷琠〹圠瑡⹴䌠湯楦浲湩⁧潴䤠⁐㘶愠摮愠潢敶倠潲整瑣潩潣灭敬整椠污敲灳捥⁴䅃ⵔ䄠䅁⠮偕坐⁄体⁒䱅䍅剔䍉䱁㈠㄰‸瑉浥丠㐱㌲ ÐRĈ䄀瑴湥楤杮䌠牡数瑮牥⁲敓癲捩獥映牯䴠獩⹣潷歲⁳潦⁲⁡慤⹹†卄⁒潃敤〠㔱‶‫〱‥偃⤠㤠Ḁ唀ࠀ
瑁整摮湩⁧敂摬牡䠯汥数⁲敓癲捩獥映牯䴠獩⹣潷歲⁳潦⁲⁡慤⹹†卄⁒潃敤〠ㄱ‴‫〱‥偃⤠㰠Ḁ帀ࠀ
瑁整摮湩⁧汅捥牴捩慩敓癲捩獥映牯䴠獩⹣敒慰物眠牯獫映牯愠搠祡‮䐠剓䌠摯⁥〱㤱䔠䴦⬠ㄠ┰䌠⁐ AYĈ䄀瑴湥楤杮圠汥敤⁲敓癲捩獥映牯䴠獩⹣敒慰物眠牯獫映牯愠搠祡‮䐠剓䌠摯⁥〱㜸䔠䴦⬠ㄠ┰䌠⁐ ›Ĉ䠀物⁥湡⁤畲湮湩⁧档牡敧⁳景挠慲敮㈠‰潴湮⁥慣慰楣祴映牯洠獩⹣栠慥祶洠瑡牥慩桳晩楴杮眠牯獫愠⁳牔湡晳牯敭Ⱳ倠汯獥䐬畲獭攠捴‮卄⁒潃敤〠㈰‸楃楶‫〱‥偃 }\Ĉ䄀瑴湥楤杮䘠瑩整⽲汐浵敢⁲敓癲捩獥映牯䴠獩⹣潷歲⁳潦⁲⁡慤⹹†卄⁒潃敤〠ㄱ‶楃楶‫〱‥偃⤠㴠Ḁ䜀敔摮牥䤠癮瑩湩⁧畁桴牯瑩㩹匭灵牥湩整摮湩⁧湅楧敮牥‬䍅䍄䴠敥畲ⱴ倠噖䱎ࠀ
倠潲楶楤杮愠摮映硩湩⁧污浵湩畩汳摩湩⁧潤牯戠汯獴‬卉⁉慭歲摥愠潮楤敳⁤愨潮楤⁣潣瑡湩⁧潮⁴敬獳琠慨牧摡⁥䍁ㄠ‰獡瀠牥䤠⁓›㠱㠶Ⱙ琠慲獮慰敲瑮漠⁲祤摥琠敲畱物摥挠汯畯⁲牯猠慨敤‬楷桴渠瑵⁳湡⁤捳敲獷攠捴‮潣灭敬整㨠〳砰㘱洠卄⁒⸹㘹ㄮḀ㠀ࠁ瑓敥潷歲椠

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR. 10.2 (Civil)