Civil Construction Tenders

d) Scaffolding, trestles, ladders, cradles and protective measures etc, as necessary for execution of work shall be arranged by the contractor without any extra cost to the department. (e) Authorised applicator of the company with trained painters will only be allowed to execute the work and the applicator will submit the experience certificate from the company. f) The entire quantity of material will be calculated and brought in a maximum 3 phases and will be accepted only post verification of PVs and Challan from the company through Mail. (g) The entire of material will be kept in the custody of MES rep and will be issued to the authorised applicator as per requirement. (h) Packing material/ empty Buckets will not be handed over to the contractor and will be destroyed after completion of work through a BOO. Buildings will be handed over to the contractor in a phased manner and subsequently to the authorised applicator only after completion of civil work like plastering/ repairing as required.

Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Repairing of of Executive office computer work station cum work table of size-1500x900x750 in diffrent room OF Shakti Bhawan Extn. Building. Top surface finished with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading. . one number lockable drawersone lockable cupboard 400mm wide finished with1 mm sunmica laminate f .one no lock and one no handle fitted in drawer and cupboard . & back side covered. .The work include cost of all labour,material T&P required for proper completion of work

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron)

Carriage of following material including loading unloading and stacking if required complete in all respect.Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and ballast etc), Stone for Masonry work & Soling and Excavated rock etc. for 5 km.