Loading
Loading…
Loading…
8,350 results • Best match
Construction of damal road work from damage c.c road in bilpura durga mandir to crematorium at renovation work due to damal road in ward number 78
Construction of damal road work from damage c.c road in bilpura durga mandir to crematorium at renovation work due to damal road in ward number 78
Repair, renovation, beautification of the adjacent area of Hatishala Ghat, including paved area, stair area and sitting area and construction of retaining wall under Baidyabati, Hooghly.
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. c) (i) With carried earth arranged by the contractor within a radius of 1 km. including cost of carried earth.
Renovation / Modification of electrical installation of vacate House No. 318, 369, 3052 Type III and 494, 4089, 4059 Type IV in the campus at IIT Kanpur
Construction of Proposed R.C. Box Culvert With Renovation Of Existing Culvert along with approach Road of Proposed Fresh Waste Processing Unit for Tarakeswar Municipality(3RD CALL)
Construction of Proposed R.C. Box Culvert With Renovation Of Existing Culvert Alongwith Approach Road Of " Propsed Fresh Waste Processing Unit For Tarakeswar Municipality " Of R.S. Dag No-234(P),L.R. Dag No.-271(P), At Mouza - Baidyapur , J.L. No. 35 , Within Tarakeswar Municipality, In Ward No.- 13, St. No.-2, P.S.-Tarakeswar, Dist.-Hooghly.. (See the attached estimate for item,rate & Quantity)
Renovation and Modification of Kitchen Area in Banquet Hall at Jawaharlal Nehru Bhawan under Vigyan Bhawan Division, Sub Division-I, CPWD, New Delhi, dg. 2026-27.
Upgradation and Renovation of Flat No. 11, 29, 31 and others in Delhi Govt Officers flats (Type-V) at GK-1, New Delhi during 2026-27.
Sink Unit (Part of Bottom Unit) having dustbin holder with SS dustbin of approx capacity of 14 litre & SS holder/Stand for Detergent/Clearner etc. Sink unit is to be fixed with slainless steel frame work in addition to the 18 mm thick both side prelaminated WPC board frame work with sink profile to provide additional strength to bear heavy load.