Loading
Loading…
Loading…
92,970 results • Best match
Miscellaneous civil repair including external painting works to Telephone Kendra, Bhadrak.
Sub-Head : Repairs to Buildings
Repair of roads, potholes at A and D Block Swaroop Nagar by pdg. RMC in Ward No. 19 Sawroop Nagar Civil Line Zone.
Government eProcurement System Created By: JAGMOHAN LAL MEENA Created Date/Time: 08-Dec-2025 03:57 PM Tender Title: Civil Work/CLZ Tender ID: 2025_MCD_257412_1
Refer tender document
Construction of School Building
GENERAL-Vazhoor BP Annual Plan 2025-26 Pro. No. 125/26-Karimpanakkuzhy Block Panchayath Building compound wall construction-General Civil Work
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
Painting of First Floor and internal outside around the courtyard of the main museum building of Indian Museum, Kolkata during 2025-2026. SH: Polising & Repair of Door in Various Galleries and miscellaneous civil works.
1 CIVIL WORK 1084345 Above 1 1095188.45
Construction of Police Station Building including Parking at ground floor and Site Development at Nagrota Bagwan Distt Kangra HP SH Civil and Electrical Works
metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound,jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete.