Electrical Equipment & Goods Tenders

Single Phase Ac Circuit Kit for Voltage, Current and Power Measurement Measurement of power by using various loads Analog voltmeter 0-300V AC panel mounted Analog Ammeter 0-5A AC Panel mounted Analog wattmeter 1.5KW AC Panel mounted Single phase Digital Power monitor to measure power Single phase AC lamp load 230V/5A 1KW Panel enclosure with Hylam front panel with input/output terminal outlets

Hard Grove Grindability Index Tester: The Instrument should be capable of determining relative ease of grind ability of Coal, Biomass ant conform to IS 4433-1979. The instrument should be enclosed type dust and noise proof compact model. 1. Grindability machine include stationary grinding bowl fabricated bowl fabricated from hardened and heat treated steel inner surface should be hard chromium plated so that there is no rusting. 2. Steel balls set Eight nos. of rust proof shinning steel grinding balls, each 25.400± 0.003 mm diameter. The balls shall be driven by upper grinding ring rotated at 19 to 21 revolutions/ minute is to be connected to a spindle and shall be driven by an integral 0.25 HP electric motor through reduction gears. 3. Total weight and force total vertical force on the balls due to top ring, gear, weights and spindle is to be 284± 2 N and closely equivalent to a total mass of 29± 0.2 Kg. 4. Revolution counter fitted with pre set revolution counter and an automatic device for stopping the machine after 60± 0.25 revolutions. 5. Sieves ASTM 16, ASTM 30 and ASTM 200 sieves with lid and receiver. 6. Outer body M.S. outer body finished in rust- roof permanent powder coated to prevent corrosion. 7. Electrical rating for use on 220/230V,50Hz, single Ph

5 hp Electric motor coupling set

Self warming System Blanket active self–warming and work without additional equipment/ electric supply for setting up and during use.It should be Polypropylene SMS material with 104 GSM, It should be 152 cm Long , width - 92cm, It should be used before, during, and after surgery to help prevent peri-hypothermia in patients. The blanket should begin warming immediately once removed from the packaging and should reach operational temperature (average 40degree C) within 30 minutes, which is maintained for up to 10 hours. CE certify with 4 digit notified body.

8. Power Supply i. The Motion and Vibration system shall be capable of running on commercial power supply 230V – Single phase / 415 V 3 phase (± 10%), Frequency 50 - 60 Hz. ii. Power distribution of Motion and Vibration system and supply of associated equipment like power distribution boards for connecting actuators, servo drives, motion control computer and other electronic equipment is vendor’s responsibility. iii. Power distribution sockets shall comply with Indian standards. iv. Power requirement of each system shall be mentioned at the proposal level itself so that FMS power distribution can be designed accordingly by HAL.

ELECTRIC MOTOR FOR SAFETY PUMP Part No 57987356