Loading
Loading…
Loading…
9,814 results • Best match
PROVN OF AUGMENTATION OF ELECT SUPPLY AT MILITARY STATION SAMBA
Material and labour for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying, stretching and testing the cable all as directed. (Note :Only punned thickness i.e 18cm shall be measered and paid).
Constructing 11kv line from EN 62 to OK 64
Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
For Rewinding and Repairing of lighting Transformer 50KVA 550V/440V at Sl.No. BSP/TR/50/LT/5 at Basdeopur Colliery under Sijua Area
Secondary side cable laying 70 Sqmm &connection & lags etc.
Construction of Tejaji Maharaj Panorama, Sursura Dist. Ajmer (Raj.)
Supplying and Laying ISI marked P.V.C. insulated submersible cable as per PWD specification for electrical Works confirming to IS:694 and as per IS8130:2013 of 1.1 kV grade. Wire should be made from... Engineer in charge, making connections. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .6.0 Sq.mm 3 core flat / Round
Construction of Hall for Shree Jhulelal Mandir at Old Sikar Bus stand
... FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made... for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 2 x 1.5 sq.mm
Covering existing unused Toilet Block (Ladies and Gents) adjacent to Concrete Laboratory into an Advance Concrete Laboratory located at the ground floor of Faculty of Engineering and Technology Library Building, JMI
LED Batten light (System lumen efficacy ≥120 135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material... F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till ...