Loading
Loading…
Loading…
10,922 results • Best match
Construction of sub division office building including compound wall and other development work at Gadra road.
... FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made... for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2x2.5 sq.mm +1X1.5 sq mm (E-4.1.7)
SITC of Air Cooled Modular Chiller Plant for Ground and First Floor in Dhanwantri Block at SMS Hospital, Jaipur
Supply and fixing of following accessories for Moulded case circuit breaker (MCCB) compatible to main MCCB OEM as per PWD specification for electrical Works, conforming to IS/IEC 60947 P - 2 :2003 including making connection etc complete in all respect.
GES/PKT/24/2026-27 PROVN OF GUARD ROOM WITH ATT TOILET AND BATHROOM ALONG WITH LADDER FOR ROOF TOP NEAR POST NO. 3 OF MSL REGT AND PROVN OF TOILET WITH BATHROOM AT NP- 3-5-7 (FWC) OF GR AND PROVN OF STORAGE ROOM NEAR BLDG NO. P-127 AT AD BDE UNDER
M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed. Note: Punned thickness of sand shall be measured.
REPAIR / REPLACEMENT OF UNSV STREET LIGHT, TIMER PANEL, PERIMETER LIGHTING, STREET LIGHT POLES, AND OTHER CONNECTED WORKS AT ZONE-III UNDER AGE(I) LANSDOWNE
Supply and laying cable protection old size bricks, common burnt clay sub class 'B' designation 75 for protection of UG cable laid in trenches with axis of the bricks perpendicular to the axis of the cable complete all as specified and directed.
Construction of Ramp
Part 2 - Electrical Work
Installation of Passenger Lift at Womens College Zakura
Providing and Laying of Copper (cu) strips and cu plate for proper earthing for all components carrying main current, including but not limited to the motor and electric panel. Use bolts or screws and cu strips to establish grounding connections on each component. ...