Electrical Works & Installation Tender Results

1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

Supply & delivery of cubical type L.T. Distribution panel board of required size wall cum floor mounted compartmentalized with maple arrangement having rigid & self supporting structure fabricated from 2 mm thick CRCA sheet steel with M/S angle frame. The panel board consisting of the following switches & the Panel board to be get inspected by EIC -- A) Incoming Arrangement.a) switch disconnect or fuse (panel mounting cubical type) conform to IS : 13947 in open execution three pole & Neutral AC 23A, 50HZ, 415 Volt 630 Amp with 3 nos 630Amp DIN type HRC fuse link , L&T / SIEMENS make . . --1 No B)Bus Section: b) S& Fixing 0-800 Amp. Ammeter of size 96 sq. mm. (square type)AE/LT make. --1 no 415 V 1000A. electrolyte grade tinned copper bus bar with vertical section of required size same in size for Phase RYB, & neutral bars & 20x 5 mm Al. Bar for earth. A bus bar shall be fixed with FRP chair & the entire bars are insulated with PVC heat Sinkable sleeve of suitable size & color as per direction of E.I.C b) switch disconnect or fuse (panel mounting cubical type) conform to IS : 13947 in open execution three pole & Neutral AC 23A, 50HZ, 415 Volt 315 Amp with 3 nos 315 Amp DIN type hrc fuse link , L&T / SIEMENS make . . --1 Nos. d) Switch disconnector fuse (panel mounting cubical type) conform to IS: 13947 in open execution three pole & Neutral AC 23A, 50HZ, 415 Volt 160 Amp with 3 nos 160 Amp DIN type hrc fuse link, L&T / SIEMENS make . ---- 6 Nos. e) Switch disconnector fuse (panel mounting cubical type) conform to IS: 13947 in open execution three pole & Neutral AC 23A, 50HZ, 415 Volt 125 Amp with 3 nos 125 Amp DIN type hrc fuse link, L&T / SIEMENS make . --- 1 Nos. Metering panel:a) S& Fixing 0-500 V. Voltmeter of size 96 sq. mm. (square type) AE/LT make --1 noc) S& F Rotary type Voltmeter selector Switch of 10 Amp. KayCee make --1 no d) S&F Rotary type Amp. Meter selector Switch of 10 Amp. KayCee make --1 noe) S&F current transformer of size 600/5A Kappa make --3 nos f) S&F 20 Amp. Bakelite fuses base & bridge with 4 Amp. HRC fuse link .GE / Appvd make --3 nos g) S&F Danger board --1 no Inter Connection:All interconnection of switches & bus bar Shall be made with required sizes of multi strand PVC insulated copper wire to be kept for Cable connection for main switches & the end of all connections of metering panel to be finish with Copper socket by crimping method having Marked ferrule for indication. Earthing.A separate earth bolts/Bars – 2 Nos will be provided in panel board in both sides as per drawing. Cable Alley:Cable entry arrangement will be provided in the cubical panel in vertical position of size with reqd sizes of AC/DC make connector indicating phase & neutral for each outgoing main switches & gland plate must be placed at the bottom of the panel with detachable type as per direction of E.I.C. Painting.The complete panel board shall be painted by 2 coats of powder coated synthetic enamel Paint over two coats of R.O. primer of Approved make & brand & color as per Direction of E.I.C. Constructural Details:All incoming & outgoing panel mounted cubical Switch disconnector fuse shall be housed in Respective compartment with hinged & gasketted Door at front. All doors shall have Panel lock Arrangement. The panel shall be properly Gasketted to prevent ingress of dust & moisture & Remaining . Busbar will be properly arrange & all Switches shall be fixed by M.S. nuts & bolts On angle /flat iron frame base.as per direction of E.I.C. Installation : The panel should be installed as per site condition & requirement with brick pedistal / foundation etc to comp the installation as per Direction of E.I.C. .

Cost for 3-Ph 50 mm2 AB Cable on 8 Mtr X 200 kg PSC Pole for LT line (except cost of pole)