Loading…
Loading…
63,034 results • Best match
Repair and maintenance of various Civil and Electrical works in Student Welfare Centre, B.H.U.
eProcurement System Government of India Created By: SANAD KUMAR SINGH Created Date/Time: 20-Dec-2025 10:19 AM Tender Title: Repair and maintenance of various Civil and Electrical works in Student Welfare Centre, B.H.U. Tender ID: 2025_BHU_888803_1
Electrical works in Upgradation / retrofitting of Central Library at GMC Srinagar
LED Down lighter (SMD Type) (System lumen efficacy ≥120 lm/Watt ), Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body including trim .
APPROVAL FOR INVITING RETENDER FOR THE WORK INSTALLATION OF ELECTRICAL ACCESSORIES AT AIKATAN COMMUNITY HALL, WARD OFFICE AND OTHER PLACES IN WARD NO-07 UNDER BOROUGH-1, KMC
Laying on Wall / surface with Saddles / clamps.(a)Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting
GENERAL-General Education - Annual Plan 2025-26 Rewiring of Hostel block in DIET, Malappuram- Electrification-General Electrical Work
1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
Upgradation works for 20 Nos. Qtrs of National Housing Bank at Vasant kunj, New Delhi during 2025-2026. (SH:- Civil and Electrical Works)
2 Electrical Work 2667700 Below 13.99 2294488.77
Laying of power cable and control cable at ERPL Mughalsarai