Fabrication Works Tenders

Plain / Reinforced Cement Concrete M 15 in open foundation complete as per Drawing and technical specifications including formwork, centering, vibrating, compacting, cost of all labour, materials, usage charges of machinery, curing, lead, lifts, loading, unloading, transportion, stacking, finishing the exposed faces neatly etc., complete with lead of concrete mix up to 1 Km(excluding cost of steel and fabrication charges) all incidental charges complete and as directed by the Engineer - in - Charge of the work. 1.PROVIDING PERMANENT RESTORATION TO EARTH SLIPS BY GROUTED ANCHORS, SOIL NAILING AND SHOTCRETE AT Km 241.755 RHS, Km 242.100 RHS, Km. 242.700 RHS & Km. 244.400 RHS (At 04 LOCATIONS ON SHIRADI GHAT) OF NH-75 B.C ROAD VELLORE SECTION 2.PROVIDING PERMANENT RESTORATION TO EARTH SLIPS BY GROUTED ANCHORS, SOIL NAILING AND SHOTCRETE AT Km 243.600 RHS, Km 243.700 RHS &Km 243.750 ( At 3 LOCATIONS ON SHIRADI GHAT) OF NH-75 B.C ROAD VELLORE SECTION

Fabrication and fixing of T/F Angle seat on Double pole for Mounting and safe placement of T/F on Double pole by providing M.S. Clamps Nut & Bolts.

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Steel Fabrication