Fabrication Works Tenders

FABRICATION, ERECTION & GROUTING OF S/s STRUCTURE(A) BUS BAR GANTRY & TERMINAL GANTRYFabrication, erection, & grouting of Bus bar gantry/ terminal gantry using rail pole and channel as per norms No 02,.(B) Fabrication of bus isolator & line isolator structure as per norms.Digging of two nos. pits providing stone pad at the bottom of the pit and grouting pad at the bottom of the pit and grouting of two legs of the isolator structure in CC (cement coarse sand and stone grit ) including supply of all materials complete in all respect. The work includes dragging, shifting , raising and erecting the two legs with runner in proper allignment, and level and plumb. Both plinths of the isolator structure shall be properly finished with smoothening of edges. No 03,.(C) Fabrication of Lightening Arrestor/CT structure/PT structure as per norms Digging of two Nos pits providing stone pad at the bottom of the pit and grouting of two legs of the above structures in CC (Cement, coarse sand and stone grit including supply of all civil material complete in all respect. No 06,.(D) Fabrication of Post structure as per norms. Digging of two Nos pits providing stone pad at the bottom of the pit and grouting of two legs of the above structures in CC (Cement, coarse sand and stone grit ) including supply of all civil material complete in all respect. No 05

Fabrication & Erection of Structural Steel

10 9925000010 with fitting of necessary fabrication for 11KV cable including excavation of pit & refilling of earth as per No

RCC M- 20 Design mix using 20mm HBG crushed metal 0.480 cu.m , 10mm HBG crushed metal 0.320 cu.m , sand 0.400 cu.m and cement 350 kgs with water cement ratio of 0.53 (185.5 Lit per cu.m of CC ) etc. horizontal plain sunshades or lofts projecting from the face of the wall 65mm average thickness,80mm thick at the face of the wall and 50mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing , etc.,complete, but excluding cost of centering charges and excluding cost of steel and its fabrication charges for finished item of work.

100.37.7.2:Fabricating M.S. flanges of diameter 200mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.