Loading
Loading…
Loading…
6,396 results • Best match
Providing Kitchen Ventilation Arrangement at IIM Lucknow, Noida Campus.
AIR DISTRIBUTION Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vaney, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. (Ducting layout drawing and its design to be got approved by E-in-C before fabrication and erection) 20 G - GSS(1.0MM)
Electric Work in RUHS University Pratap Nagar Jaipur
Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. .
ARC for Laying of 3LPE coated carbon 4 inch steel pipeline in GAs under Bihar and other associated work including installation of SV stations and supply of materials mentioned as per SOR, for connectivity steel lines for DRS/MRS/CNG Stations.
"WELDING OF PIPES WITH PIPE / FITTINGS / VALVES : - Receiving and taking over of all free issue materials from company’s designated place of issue, handling including lifting, transpor tation from Owners and / or contractors storage point to work site / workshop as applicable for fabrication or / and to work site fo r field fabrication and erection for all piping items supplied by COMPANY / CONTRACTOR. Fabrication including cutting, edge preparation, inclusive of grinding the edges of pipes, fittings etc. to match with grinding the edges of pipes, fittings etc. to match with the matching edges of uneven / different thickness wherever required fit - up bending, p reheating wherever required, welding etc. pipe fittings like elbows, tees, reducers, weldolets, sockolets, vent and drain point conn ection etc. including providing stub-in connection, fabricated fittings and reinforcement pads etc. as required. Carrying out Non-de structive testing as per specification & instruction of EIC. Note: 1. All materials of sizes below 4"" shall be in contractor's scope. 2. Welding Joints under above SOR item are for Above Ground Piping only (Except Flange). 3. The above SOR item shall be carried out only when instructed by Engineer In charge. 4. These rates shall be applied only when permitted by Engineer In charge. 5. Supply and installation of Assorted pipes of all rating/ thickness types, as required are inclusive under this SOR item, Contract or to quote accordingly. 6. 4"" and above (fittings & flanges etc. ), material supply are in the contractor scope. It shall be be paid separately under Suppl y item provided elsewhere in the SOR on actual quantity basis. 7. Bolts, nuts, washer, U-clamps, gaskets etc. of all sizes required for piping facilities shall be procured and supplied by the con tractor within the rate quoted. These items shall not be separately measured and paid."
QUANTUM OF WORKS INVOLVED IN INCREASING CAPACITY OF DISTRIBUTION TRANSFORMER AT DIFF. SITES IN BUSINESS PLAN YEAR 2026-27 UNDER THE AREA OF EDD-MAGARWARA, UNNAO..
Fabrication and erection of Distribution Transformer fencing around Transformer and L.T. Distribution Pillar Box with 01 nos. gate & locking arrangement including cost of M.S. Angle size 40x40x5 and M.S. Flat size 25x5, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including Painting of two coats of paint in iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust as per RESPO norms. (All the material will be arranged by the contractor)
Replacement of worn out girders of common loop line & up third loop line and replacement of wornout girders of UP & DN GC main Line Gaya Bridge along with replacement of bearing plate & fitting of UP & DN GC girder of Gaya Bridge at DHN.
1000.00 containers conforming to IS:2339 with DFT of 15 - 20 Microns for each coat. Removing of existing bed plate from existing bed block, supply, fabrication and erection of new bed plate of approved sizes in exact position over bed block of pier/abutments by giving full and even bearing, setting them on the layer of free flow non-shrinkable grouting compound, scrapping or chipping of bed block, if required, fabrication and fixing of holding down HTS bolts of suitable sizes along with nuts, washers etc., drilling holes of required size, grouting of holes by epoxy mortar after fixing holding down bolts. Total work to be done during traffic block. Cost of holding down HTS bolts shall be paid extra under relevant item for supply of HTS holding down bolts.
Ext of HT LT line inc. installation of 1x200 KVA DTR to Govt. Degree College Gondatwisa under ESD-GNT
Fabrication of Cross Arms by MS Channel/MS Angle as per specification