Handling and Transportation Tenders

Supply, erection, commissioning, testing and handing over of 1No 160 KVA (128 KW) Diesel Generator Set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications canopy, fuel tank battery charging alternator with Standard Panels developing 3 phase electrical output 160 KVA powered by diesel engine of 0.8 P.F Three phase 415/420Volts, 50 c/s, 115 BHP at 1500 RPM as detailed below. a]. ENGINE: Model 6SL 8800 TA turbo charged vertical inline 6 cylinders. Liquid cooled diesel engine developing 200 HP at 1500 RPM conforming B.S 5514 / 6490 or IS 10000 incorporating the following accessories. The engine shall comprise the following standard fittings Flexible coupling with guard, Flywheel, Air cleaner, Fan blower type with guard, Radiator with guard, water pump engine mounted, Fuel pump, Fuel filter, Lubrication oil filter, Lubrication oil pump, Governor (mechanical / hydraulic) Exhaust silencer residential type. b]. Electric starting equipment, complete with starter motor, dynamo and battery with cables, flexible exhaust piping of 50cms length c].ENGINE INSTRUMENT PANEL MOUNTED: Starting push button with key, lubricating oil temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil pressure, safety control for high water temperature, safety control for over speed, hour meter and RPM meter indicator, battery. charging ammeter. The engine should be capable of providing 10% overload for one hour for every 11 hours continuous running at full load. d]. ALTERNATOR: KIRLOSKAR GREEN make Alternator rated at 160 KVA, 415V, 0.8PF, 50Hz, 3phase , 4wire self regulated and self exited with voltage regulation of + or 1% class “H” insulation in SPDP enclosure and confirming to IS 4722/BS 2613,

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Loading, Transportation, Dozing and Handling of Gypsum at FACT (CD) for a period of one month.

Earthwork in all kinds of soil except sand, sandy or slushy soil in borrow area by mechanical means and transportation of excavated earth by mechanical means with all leads, lifts, delfts, rehandling, conveyance, royalty,EMF,DMF,Additional charges of materials, labour cess, including loading and unloading the same on prepared and approved surface including rough dressing and breaking the clods to maximum 5 cm. to 7 cm. in size and laying in layers not exceeding 22.5 cm.layers to make ready for watering and compaction with sheep foot rollers and dozers but excluding watering and compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road and borrow area with labour, T & P etc. complete as per direction of the Engineer-in-charge. (Earth will be arranged by the bidder at his own cost and risk. Earth should be free from clods, roots, brickbats and other debris.. Measurement of the fill to be taken on the finished level section) only

Earthwork in all kinds of soil except sand, sandy or slushy soil in borrow area by mechanical means and transportation of excavated earth by mechanical means with all leads, lifts, delfts, rehandling, conveyance, royalty,EMF,DMF,Additional charges of materials, labour cess, including loading and unloading the same on prepared and approved surface including rough dressing and breaking the clods to maximum 5 cm. to 7 cm. in size and laying in layers not exceeding 22.5 cm.layers to make ready for watering and compaction with sheep foot rollers and dozers but excluding watering and compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road and borrow area with labour, T & P etc. complete as per direction of the Engineer-in-charge. (Earth will be arranged by the bidder at his own cost and risk. Earth should be free from clods, roots, brickbats and other debris.. Measurement of the fill to be taken on the finished level section) only

Collecting, supplying and stacking good quality laterite moorum at work site in standard box heap size of 1.50M x 1.50M x 0.50M to be measured as 1 cum for pre-measurement beyond the trafficable berms and conveying from stacks, spreading mrooum with all leads, lifts and delifts, handling and rehanding charges including cost, conveyance, royalty of all material, EMF,DMF, Additional charges of materials,etc. labours and hire charges of T&P materials required for the work, watering and consolidation with PRR including all incidental charges with labour cess complete as per specification and direction of the Engineer-in-charge.