Heavy vehicle accessories Tenders

Wiring with 2x1.5sq.mm.(22/0.3) PVC insulated single core unsheathed FRL Scopper conductor cable of 1100V grade in suitable heavy gauge M Sconduit pipe on wall and ceiling with MS accessories inflush with wall with 150mmx100mm x75mm MSswitchbox with 3mm thickhy lumsheet cover for 5A3 pinnon interlocking CS plug with continuous earth wire connection of1.5sq.mm copperwire and making good of the concealed portion with suitable colour for concealed plug point

`Hiring of Vehicle for Site Supervision, Inspection and Official Duties. Model: Tata Punch EV Smart (Electric Vehicle), Latest Model or Equivalent — including driver, all consumables, charging/electricity charges, repairs, maintenance, insurance, taxes, periodic service, tolls (if any), mobilization, standby arrangements, and all other incidental charges, complete in all respects, as per directions of the Engineer-in-Charge. The vehicle shall be maintained in good running condition at all times and shall comply with all statutory requirements applicable in the State of Haryana.`

Supply, installation, testing, and commissioning of a 1.5-meter long stainless steel automatic boom barrier system complete with single phase, bi-directional motorized mechanism operates on 230 V, 50 Hz or 24 V DC, control panel, sensors, and accessories. The boom barrier shall include a stainless steel cabinet with a 1.5 m boom arm suitable for continuous outdoor operation, opening/closing and compatible with push button and remote control operation. The work shall include all necessary civil foundation, cabling, conduit laying as per OEM instruction. The system shall be installed, tested, and commissioned in full working condition, including all labour, materials, transportation, and taxes, complete all as specified and directed. (Make: Model no. FAAC 620 RAPID AUTOMATIC BOOM BARRIER of NEPTUNE or equivalent Model of TIME SWITCH / STATIC SYSTEM / SYROTECH / TOSHI AUTOMATION / YSR / SWJ SECUTECH)

BLD-ELEC-1-4.2 .c : Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.Makes : Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold/ Polycab / DEC / Beljin / Champion /Austro

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.165 mm dia drilling &112mm Dia Drilling. Drilling of Bore well with DTH Rig per RM.2) Supply and Delivery of 180mm dia 250mm dia, 140mm dia Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 3) Perforation charges for inner casing of 180mm dia UPVC casing pipe 4) Supply and fixing of end cap for UPVC casing pipe 5) Geologist's survey charges for site selection of source including Contract profit @ 13.615%. but excluidng CED/GST etc complete. ( Note: Borewell shall be drilled with Approved Rate Contractor approved by any RWS office circle and QC of materials shall be done by Departmental persons)

S&F Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm including disconnecting /connecting the cable in RYB phase sequence in RMU/pole incl cutting the unserviceable portion and testing after connection in all respect etc complete.