Industrial Pumps Tenders

ASEPTO PUMP

Supply and Delivery Of Light Commercial Vehicle of Following Specifications: 1.Displacement (CC) / Engine Capacity-700 CC- 1250 CC , 2. Max Power 20-30BHP2500 Rpm And Above, 3.Max Torque- 50ONM @ 2000 Rpm And Above, 4.Type Of Fuel-Diesel. 5. Load Capacity -2 Cu.Rn, 6. Vehicle Emission Norms- BS-VI, 7.No Of Cylinder In Engine 2-4 Cylinder, 8.Length Of Chassis- 3800 Mm 3950 Mm, 9.Width Of Chassis-1500 Mm - 1550 Mm. Ground Clearance. 150 Mm -165mm. 10.Fuel Tank Capacity-Diesel-30 Ltrs To 40 Ltrscng-12-25kg. 11.Size Of Tyre's & No's-145 R 12 - 5 Nos. 12.Wheel Base- 1900 Mm- 2250 Mm. 13.Gross Vehicle Weight- 1550 Kg-1900 Kg. 14.Clutch- Single Plate Dry Friction Diaphragm. 15.Transmission System-Manual. 16.No Of Speed/ Forward Gears- 4 Nos Speeds(4F+1R). 17.Type Of Steering -Manual / Power. 18.Spead Governors -Shall Be Fitted. 19.Pay Load-800Kg To 1000Kg. 20.Tipper Body Length -2100 Mm-2200mm, Mild Steel. 21.Tipper Body Width- 1400 Mm -1500mm, Mild Steel. 22.Tipper Body Height- 750mm-950 Mm, Mild Steel. 23.Side Portion (LH & RH)& Rear Doors Sheet Thickness - 2 Mm, Mild Steel. 24.Tipper Body Top Sheet Including frame Sheet Thickness -1.6mm, Mild Steel. 25.Tipper Body Top Lid Sheet Thickness 1.2mm, Mild Steel. 26.Tipper Container Should Be Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containers With Hinges And Locking System. A Partition Should Be Provided On The Middle Cf Container Along The Vertical Length Of The Body. 27.Tipper Body Top Lid Main Sheet Thickness- 75 X 40 X6 Mm. 28.Hydraulic Cylinder Make Reputed Make. 29.Hydraulic System Driven-Main Engine. 30.Pump Make-As Per IS Standard. 31.Painting-Should Be Painted With One Coat Of Anti-Corrosive Epoxy Primer And Two Coats Of Enamel Paint For Approved Quality To Ensure Long Lasting Resistance For Weatherizing And Breakage. The Color Shade Should Be As Per Norms. 32Lettering -To Be Carried Out As Directed By Dept Officer. 33 Tipper Body Rear Door-Shall Be With Necessary Locking Facility. 34.Side Safety Guard- Shall Be Provided As Per RTO Requirernent. 35.Additional Conditions-Vehicle With Fuel Sensor And GPS Tracking. 36.Warranty Distance/Year -25000KM//12 Months Which Ever Is Earlier. (One Year O&M By Suppliers) including GST.

Manning and operation at various Electric supply installations DG Sets of Zone 03 under EIC Etc. Manning and operation at various Electric supply installations, DG Sets of Zone 03 under EIC with the following manpower (a) 05 (five) Nos Electrician Per Day (indlucing sunday and holidays) in 08 housrs shift. (b) 06 (Six) Nos mate Electrician Per Day (indlucing sunday and holidays) in 08 housrs shift Location and Timming of shifts will be decided by Engr in charge. Note (a) The FGM must be ITI quailifed in relevent trade/ 10 th pass with 03 to 05 years expereince in relvent trade. The Mate FGM must be10 th pass with 01 to 03 years expereince in relvent trade (b) The duty operator will also responsible of the following (i) Proper maintenance and cleaning in and out side area of pump houses/RO Plant /Borewell regularly as a presentable manner. (ii) A printed and properly binded regular attendance/log sheet must be maintained in respect of duty FGM by the contractor supervisors and produced to Engineer in Charge on demand. (iii) In case of non availability/absence of above FGM recovery will be effected double the minimum fair wages applicable for the relevant category or double the quoted rate whichever is higher. Complete all as specified and directed by Engineer In Charge.

Manning and operation at various Electric supply installations DG Sets of Zone 02 under EIC Manning and operation at various Electric supply installations, DG Sets of Zone 02 under EIC with the following manpower (a) 05 (five) Nos Electrician Per Day (indlucing sunday and holidays) in 08 housrs shift. (b) 06 (Six) Nos mate Electrician Per Day (indlucing sunday and holidays) in 08 housrs shift Location and Timming of shifts will be decided by Engr in charge. Note (a) The FGM must be ITI quailifed in relevent trade/ 10 th pass with 03 to 05 years expereince in relvent trade. The Mate FGM must be10 th pass with 01 to 03 years expereince in relvent trade (b) The duty operator will also responsible of the following (i) Proper maintenance and cleaning in and out side area of pump houses/RO Plant /Borewell regularly as a presentable manner. (ii) A printed and properly binded regular attendance/log sheet must be maintained in respect of duty FGM by the contractor supervisors and produced to Engineer in Charge on demand. (iii) In case of non availability/absence of above FGM recovery will be effected double the minimum fair wages applicable for the relevant category or double the quoted rate whichever is higher. Complete all as specified and directed by Engineer In Charge.

SCRAP OF VEHICLE UNITS(STREEING PUMP)

EM6290B-5117983 SEAL FW PUMP