IT Services Tenders

(c) :2nd Cr:ai :-T,: apply the 2nd coat of two component acrylic modified, reatiy to-use, flexible cementttious material right angle to the '1st coat over the glass fibre liad surface. 2nd coat should be applied @0.7 kgl Sqrnt/coat. For the pltrpose of measurement the entire treated surface will be rneasurecl." Alte r three days of drying the 2nd coat, therainwater ouilets to be plugged and ponding test to be done for 48 hours to rrjerrtify se epage, lealage from soffit and if found necessary rectification lo be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectifcation to be done as per satrsfaction of E/C protected from damage before screed over it. Watqr proofing Brand:*Sika Topseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2Kl MYK Aqraiin TG Product Performance - Chemical Base Part A. Acrylic copolmer, Part B Specially graded cementitious powder - Density 1.6 l.rg/l (mixcd density) at +27oC Tensile Strength - 2 lllmm2 after 28 clays (with Fibre cloth) (According to ASTM D 2370)Prillcut Bond Streric;tl-r '-2 I'J/mm2 (concrete lajlqry) (Aqgcrdlglq ISO 4624) Slant-Shear Bond Strength -4 N/mm2 (According to FIP 5.'15) Elongation at Break -35% without Fibre Cloth and 20% wilh Fibre Clot (Accordrng to ASTM D 2370)

5.five level, excluding cost of centering, shuttering, finishing and reinforcement : n en odes, it content in a try ticket, ot an art e. one pi 5.2.2 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natu ral sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

services like diffusers, grills, light fittings, fixtures, smoke dtectors etc.,

1. Whether Service Covered under Reverse Charge? [ At present Services of GTA, Legal andSponsorship, among others, are covered under GST Laws]

Price Schedule for Additional IT Hardware (Sheet 2)

work or any part of it, executed through any other agency/Bidder in the manner and on the terms it thinks